• 한국BIM학회 논문집
• /
• 제11권3호
• /
• pp.34-44
• /
• 2021

This study quantitatively analyzes the work performance of the structural safety diagnosis team that diagnoses pipe racks. To this end, a method for evaluating the performance of the structural safety diagnosis team using the queuing model was proposed. For verification, the case of applying the existing method and the method of introducing a 3D laser scanner for one site was used. The period, number of people, and initial investment cost of each project were collected through interviews with case project experts. As a result of analyzing the performance of the structural safety diagnosis team using the queuing model, it was possible to confirm the probability of delay in the work of each project and the amount of delayed work. Through this, the cost (standby cost) when the project was delayed was analyzed. Finally, economic analysis was conducted in consideration of the waiting cost, labor cost, and initial investment cost. The results of this study can be used to decide whether to introduce 3D laser scanners.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.1253-1253
• /
• 2022

Although the construction industry is changing from a 2D-based to a 3D BIM-based management process, 2D drawings are still used as standards for permits and construction. For this reason, 2D deliverables extracted from 3D BIM are one of the essential achievements of BIM projects. However, due to technical and institutional problems that exist in practice, the process of extracting 2D deliverables from BIM requires additional work beyond generating 3D BIM models. In addition, the consistency of data between 3D BIM models and 2D deliverables is low, which is a major factor hindering work productivity in practice. To solve this problem, it is necessary to build BIM data that meets information requirements (IRs) for extracting 2D deliverables to minimize the amount of work of users and maximize the utilization of BIM data. However, despite this, the additional work that occurs in the BIM process for drawing creation is still a burden on BIM users. To solve this problem, the purpose of this study is to increase the productivity of the BIM process by automating the process of extracting 2D deliverables from BIM and securing data consistency between the BIM model and 2D deliverables. For this, an expert interview was conducted, and the requirements for automation of the process of extracting 2D deliverables from BIM were analyzed. Based on the requirements, the types of drawings and drawing expression elements that require automation of drawing generation in the design development stage were derived. Finally, the method for developing automation technology targeting elements that require automation was classified and analyzed, and the process for automatically extracting BIM-based 2D deliverables through templates and rule-based automation modules were derived. At this time, the automation module was developed as an add-on to Revit software, a representative BIM authoring tool, and 120 rule-based automation rulesets, and the combinations of these rulesets were used to automatically generate 2D deliverables from BIM. Through this, it was possible to automatically create about 80% of drawing expression elements, and it was possible to simplify the user's work process compared to the existing work. Through the automation process proposed in this study, it is expected that the productivity of extracting 2D deliverables from BIM will increase, thereby increasing the practical value of BIM utilization.

• 한국산업보건학회지
• /
• 제1권2호
• /
• pp.181-191
• /
• 1991

The present study determined the overall noise level and the distribution of sound pressure level over audible frequency range of noise produced at various work sites. Work-related noise greater than 80dBA produced from 98 separate work sites at 37 manufacturing companies and machine shops were analysed for the overall sound level (dBA) and frequency distribution. In addition, to determine the possible hearing loss related to work site noise, a hearing test was also conducted on 1,374 workers in these work sites. The results of the study were as follows ; 1. Of the total 98 work sites, 57 work sites(58.2%) produced noise exceeding threshold limit value (${\geq}90dBA$) set by the Ministry 01 Labor. In terms of different manufacturing industries the proportion of work sites which exceeded 90dBA was the highest for the cut-stone products industry with 6/6 work sites and lowest for the commercial printing industry with 1/13 work sites. 2. The percentage of workers who were exposed to noise greater than 90dBA was 19.8% (1,040 workers) 01 the total 5,261 workers. In terms of different industries, cut-stone products industry had the most workers exposed to noise exceeding 90dBA with 82.8%, textile bleaching and dyeing industry was next at 30.6% followed by fabricated metal products industry with 27.9%, plastic products manufacturing industry had the lowest percentage of workers exposed to 90dBA exceeding noise with 4.5%. 3. There was a statistically significant correlation between the frequency of noise-induced hearing loss and the percentage of workers exposed to noise exceeding 90dBA (P<0.05). 4. The frequency analysis of noise produced at the 98 work sites revealed that 44 work sites (44.9%) had the maximum sound pressure level at high-frequencies greater than 2KHz. In addition, significantly higher sound pressure level was detected at the high-frequencies at 90dBA exceeding work sites as compared to below 90dBA work sites (P<0.01). 5. The differences in sound level meter's A-and C-weighted sound pressure levels were analysed by frequencies. Of the 28 work sites which showed 0-1 dB difference in the two weighted sound levels, 20 work sites (71.4%) had significantly higher sound pressure levels at high-frequencies greater than 2KHz (P<0.01). Furthermore, there was a tendency for higher sound pressure levels to occur in the high-frequency range as the differences in the two weighted sound levels decreased.

• Journal of Mechanical Science and Technology
• /
• 제18권12호
• /
• pp.2174-2181
• /
• 2004

The metal processing system usually consists of various components such as motors, work rolls, backup rolls, idle rolls, sensors, etc. Even a simple fault in a single component in the system may cause a serious damage on the final product. It is, therefore, necessary to diagnose the faults of the components to detect and prevent a system failure. Especially, the defects in a work roll are critical to the quality of strip. In this study, a new 3-D diagnosis method was developed for roll shape defects in rolling processes. The new method was induced from analyzing the rolling mechanism by using a rolling force model, a tension model, the Hitchcock's equation, and measurement of the strip thickness, etc. Computer simulation shows that the proposed method is very useful in the diagnosis of the 3-D roll shape.

• 대한수학교육학회지:수학교육학연구
• /
• 제16권4호
• /
• pp.345-366
• /
• 2006

본 연구에서는 3차원 공간도형의 학습에 유용한 동적 기하 소프트웨어인 Cabri3D 프로그램을 논의의 대상으로 하여 이를 공학적도구의 교육적 활용이라는 관점에서 수학 문제해결지도에 바람직하게 사용하는 방안에 대하여 살펴보았다. 예비수학교사들을 대상으로 학교수학에의 Cabri3D프로그램 활용에 관한 탐구 수업을 진행한 후, 중등수학의 지도에서 문제해결력 신장을 위해 이 프로그램이 효과적으로 활용될 수 있는 구체적인 사례들을 수집하였다. 폴리아가 제시하는 문제해결의 각 단계에 Cabri3D가 보조도구로서 유용한 역할을 할 수 있는 문제 사례와 그 활용방법을 예시하면서 현장의 수학교사들이 공학적 도구를 수학교육에 활용하는 방법에 대한 바람직한 관점을 갖게 하는데 도움을 주고자 하였다.

• 패션비즈니스
• /
• 제27권5호
• /
• pp.60-77
• /
• 2023

The scale of the industry utilizing the Metaverse platform is gradually growing around the world. Fashion brands are also starting to utilize the Metaverse platform as a new market to replace the next e-commerce platform by targeting new consumers, MZ generation, and even Alpha generation. In this study, a real K-fashion designer's outfit was made into a 3D outfit using CLO 3D program to express it in a new market, the Metaverse 3D platform. It was then compared with a real outfit. An avatar prototype was completed using Max program to simulate the 3D digital fashion outfit and produce an avatar through an optimization process. The 3D outfits showed the same level of results as the actual outfits in terms of fabric surface, material texture, drapability, overall outfit, details, and trimmings. In addition, we proposed a 2D work on total styling suggestion and modeling to secure data sets for future AI-based styling services. In conclusion, this study revealed that actual outfits and 3D outfits had the same results. It is significant that it can be a sample work to build a styling data set through styling suggestion and content production as a significant amount of styling DB construction will be required before AI styling automation services.

• 보존과학회지
• /
• 제31권2호
• /
• pp.131-145
• /
• 2015

문화재 보존처리는 손상된 문화재의 수명을 연장하고 그 가치를 재조명하는 실질적 수단으로서 높이 평가 받고 있다. 그러나 보존처리 과정은 대부분 보존처리자의 경험과 기술에 의한 수작업에 의존하고 있어 이에 따르는 많은 시간과 노력이 요구된다. 최근에는 문화재의 재질 특성과 형상에 따라 보다 정확하고 손쉽게 보존처리를 진행할 수 있는 방법을 채용할 수 있게 되었다. 즉, 지금까지 수작업으로 이루어지는 보존처리과정을 3D 프린터를 이용하여 컴퓨터상에서 구현된 입체 형상 데이터를 실물로 출력하는 방법을 이용하는 것이다. 먼저 문화재의 결손 부분을 컴퓨터상의 데이터로 구축한 다음 3D 프린터로 출력하여 결손 부분을 손쉽게 성형 및 가공 과정을 거치는 것이다. 3D 프린터 적용결과 반복적인 출력 및 디지털데이터의 형태 및 수치 조정이 가능하였으며, 다양한 소재를 활용한 여러 가지 복원재료로 부터 시험출력을 통하여 문화재 복원의 완성도를 향상시킬 수 있었다. 본 연구에서 도자기 결손부분 복원을 위한 3D 프린터 적용 시험을 위하여 현대 재현품인 청자칠보무늬향로와 차륜식토기 2점을 인위적으로 파손시켰다. 복원결과 수작업에 비해 작업시간 단축 및 정확한 형태의 재현 등에서는 좋은 효과를 나타내었다. 반면 정밀한 접합 및 표면 질감을 생생하게 표현하기 위해서는 약간의 2차적인 수작업이 필요하였다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제12권3호
• /
• pp.171-176
• /
• 2020

This paper presents an implementation of a gesture recognition platform that can be used in a factory workplaces. The platform consists of signages that display worker's job orders and a control center that is used to manage work orders for factory workers. Each worker does not need to bring work order documents and can browse the assigned work orders on the signage at his/her workplace. The contents of signage can be controlled by worker's hand and arm gestures. Gestures are extracted from body movement tracked by 3D depth camera and converted to the commandsthat control displayed content of the signage. Using the control center, the factory manager can assign tasks to each worker, upload work order documents to the system, and see each worker's progress. The implementation has been applied experimentally to a machining factory workplace. This flatform provides convenience for factory workers when they are working at workplaces, improves security of techincal documents, but can also be used to build smart factories.

• 한국지반공학회논문집
• /
• 제27권8호
• /
• pp.63-71
• /
• 2011

대부분 비정형 구조물인 토목분야에서 BIM(Building Information Modeling) 기법을 적용할 경우 현재 BIM 기법이 도입되기 시작한 건축분야와 비교해 상대적으로 건설 생산성 향상의 기대효과가 높을 것으로 인식되고 있다. 본 연구에서는 NATM공법 터널을 대상으로 BIM기반 3D 모벨링을 통한 물량산출을 실시하여 기존의 2D기반의 물량산출과 비교, 오차분석을 수행하였다. 그 결과 구조물공에 있어서는 오차범위가 0.00%~-1.45%로 아주 작게 나타났으나, 토공에 있어서는 오차범위가 -19.78%~35.30%로 대단히 크게 나타났다. 이를 통해 기존 2D기반 구조물공 물량산출의 경우 0.00%~5.00%의 할증률을 감안하여 본다면 BIM기반 물량산출과의 오차가 무시할 정도로 나타남에 따라 BIM기반 3D 모델링을 통한 자동 물량산출의 신뢰성을 확인하였다. 또한 토공의 경우는 토공전제의 물량산출 오차는 구조물공과 동일하게 오차가 무시할 정도이지만, 암별 물량산출 오차가 크게 나타남으로서 2D 기반 물량산출의 신뢰성에 문제가 있음을 알 수 있었다. 따라서 토공은 반드시 BIM기반 3D 모델링을 통한 물량산출을 수행하여 물량산출의 신뢰성을 확보해야하는 사항이라 판단되며, BIM의 설계, 시공, 유지관리 단계의 정보통합의 장점을 고려하여 토목분야에서의 BIM 설계기법 도입에 대한 효용성 및 적용 가능성을 확인하였다.

• 대한공간정보학회지
• /
• 제18권1호
• /
• pp.63-72
• /
• 2010

본 연구에서는 단지 설계과정 중 토공사의 효율성을 증진시키고, 토공계획에서 시공에 이르는 연결방안으로 3차원 지형공간기반의 토공모델링에 의한 설계가 가능하도록 토공설계 프로그램을 제작하였다. 토공량 산정시 측량자료를 3차원 격자 DEM을 작성하여 정밀한 토공량 산정을 가능하게 하였고, 이를 기반으로 토공이동과 장비활용이 가능하도록 토적표를 구성하였다. 토공작업에 소요되는 각종 건설장비의 재원을 고려하여 이동토량 및 경로가 표시되도록 하였으며, 공사진행상황파악이 가능하도록 open API 기반의 KML 형식으로 결과를 저장하여 3차원 가시화의 직관적 이해를 높이고 분석 결과의 공유가 용이하도록 제작하였다.