• 한국의류학회지
• /
• 제42권1호
• /
• pp.195-209
• /
• 2018

This study reviewed emerging trends in 3D technology adopted in apparel design research and product development for rapid prototyping and effective evaluation of product performance. Based on a literature review, the authors discussed technical advantages, practical merits and limitations, applications, and on-going developmental efforts of the following methodologies focusing on 3D body scanning and 3D motion capture, and 3D virtual fit simulation technologies. Such data-driven technical approaches observed in recent apparel design research and industry practice are expected to increasingly be adopted in the field to improve consumers' satisfaction with functionality, aesthetics, and comfort of a wide range of apparel products that include daily wear, sport apparel and protective clothing.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제38권
• /
• pp.13.1-13.12
• /
• 2016

Background: Mandibular motion tracking system (ManMoS) has been developed for orthognathic surgery. This article aimed to introduce the ManMoS and to examine the accuracy of this system. Methods: Skeletal and dental models are reconstructed in a virtual space from the DICOM data of three-dimensional computed tomography (3D-CT) recording and the STL data of 3D scanning, respectively. The ManMoS uniquely integrates the virtual dento-skeletal model with the real motion of the dental cast mounted on the simulator, using the reference splint. Positional change of the dental cast is tracked by using the 3D motion tracking equipment and reflects on the jaw position of the virtual model in real time, generating the mixed-reality surgical simulation. ManMoS was applied for two clinical cases having a facial asymmetry. In order to assess the accuracy of the ManMoS, the positional change of the lower dental arch was compared between the virtual and real models. Results: With the measurement data of the real lower dental cast as a reference, measurement error for the whole simulation system was less than 0.32 mm. In ManMoS, the skeletal and dental asymmetries were adequately diagnosed in three dimensions. Jaw repositioning was simulated with priority given to the skeletal correction rather than the occlusal correction. In two cases, facial asymmetry was successfully improved while a normal occlusal relationship was reconstructed. Positional change measured in the virtual model did not differ significantly from that in the real model. Conclusions: It was suggested that the accuracy of the ManMoS was good enough for a clinical use. This surgical simulation system appears to meet clinical demands well and is an important facilitator of communication between orthodontists and surgeons.

• Nuclear Engineering and Technology
• /
• 제55권6호
• /
• pp.1966-1973
• /
• 2023

Virtual reality technology has been widely used in the field of nuclear and radiation safety, dose rate computing in virtual environment is essential for optimizing radiation protection and planning the work in radioactive-controlled area. Because the CPU-based gamma dose rate computing takes up a large amount of time and computing power for voxelization of volumetric radioactive source, it is inefficient and limited in its applied scope. This study is to develop an efficient gamma dose rate computing code and apply into fast virtual simulation. To improve the computing efficiency of the point kernel algorithm in the reference (Li et al., 2020), we design a GPU-based computing framework for taking full advantage of computing power of virtual engine, propose a novel voxelization algorithm of volumetric radioactive source. According to the framework, we develop the GPPK(GPU-based point kernel gamma dose rate computing) code using GPU programming, to realize the fast dose rate computing in virtual world. The test results show that the GPPK code is play and plug for different scenarios of virtual simulation, has a better performance than CPU-based gamma dose rate computing code, especially on the voxelization of three-dimensional (3D) model. The accuracy of dose rates from the proposed method is in the acceptable range.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2006년도 학술대회 1부
• /
• pp.954-959
• /
• 2006

Virtual Reality simulation enables immersive 3D experience of a Virtual Environment. A simulation-based VE can be used to map real world phenomena into virtual experience. This research studies on the use of Newton's physics law to demonstrate the effects of forces upon object's falling movement, and their effects towards other fallible objects. A reconfigurable simulation enables users to reconfigure the parameters of the objects involved in the simulation, so that they can see different effects from the different configurations, such as force magnitude and distance between objects. This concept is suitable for a classroom learning of physics law. Preliminary implementation is done on a PC with a joystick for 4DOF movement. The graphics is implemented by SGI OpenGL Performer. A middleware called NAVERLib that consists of Performer's modules for easy XML-based configuration is used for management of visualization, network and devices connection, and where the engine of this domino simulation is attached.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2007년도 정기학술발표대회 논문집
• /
• pp.957-960
• /
• 2007

최근 시행되는 건설공사에서는 설계 및 시공과정에 소요되는 공사정보들을 점차 가상현실기반의 3D모델로 활용하는 사례들이 증대되고 있다. 본 논문에서는 개념 설계 단계에서 활용 가능한 가상현실기반의 레이어 객체 시뮬레이션 기능 방법론을 구성한 후, 완성된 시스템으로 구축하여 활용성을 검증하고 있다. 레이어 객체 시뮬레이션 시스템은 사용자가 지정한 임의 공사 순서대로 구조물을 가상공간에서 사전 시공하여 실제 시공시의 문제점을 사전에 검토가 가능하도록 한다. 이러한 방법론은 3D객체 기반의 가상건설 시스템 구축시 주요 기능으로 적용되어 효율적 공사관리가 가능하게 할 수 있다.

• 한국측량학회지
• /
• 제28권4호
• /
• pp.403-411
• /
• 2010

This research demonstrates a 3D virtual visualization of urban environment and video fusion for effective damage prevention and surveillance system using open standard. We present the visualization and interaction simulation method to increase the situational awareness and optimize the realization of environmental monitoring through the CCTV video and 3D virtual environment. New camera prototype was designed based on the camera frustum view model to project recorded video prospectively onto the virtual 3D environment. The demonstration was developed by the X3D, which is royalty-free open standard and run-time architecture, and it offers abilities to represent, control and share 3D spatial information via the internet browsers.

• 복식
• /
• 제66권8호
• /
• pp.46-60
• /
• 2016

Countries have different brassiere patterns, and this study produced and compared 3/4 brassiere patterns from different countries to determine the difference in patterns, and to investigate the stress distribution and shape of cross section while wearing brassieres using 3D virtual fitting system. Despite the growing interest in underwear, there is a lack of related books and research on brassiere patterns, which causes the difference in sizes and pattern drafting methods by countries. Thus, research on this is needed. 3D virtual fitting system has been introduced to compare patterns, thereby improving visible effects and reducing the loss in cost caused by underwear pattern fitting test. According to the result of pattern analysis, The Secoli type exhibited the least breast cover rate (14.9 cm), while the largest cover rate was shown in Christina and ESMOD types (17.7 cm). It is believed that the difference in pattern drafting causes the difference in the total length of a brassiere. Furthermore, the Secoli, Moda Burgo, and ESMOD brassieres drafted from basic bodice pattern were found to be longer than the Christina and Han Sunmi brassieres attained from direct pattern drafting. Moreover, the darts' volume of upper and lower cups in Christina and Han Sunmi types was similar in shape. The shapes of cradle drafted from basic bodice pattern were a straight line, while those from direct drafting formed a curved shape. In fitting multiple cross sections, the Secoli, Moda Burgo, and ESMOD brassieres had gaps between the brassieres and the body. Among these, the largest number of gaps was observed in the ESMOD type pattern. This study aimed at performing comparative analysis of various brassieres' pattern drafting types as a basic research for developing a brassiere pattern drafting type.

• 한국CDE학회논문집
• /
• 제13권6호
• /
• pp.429-439
• /
• 2008

With a remote operated manipulator system, the situation at a remote site can be rendered through remote visualized image to the operator. Then the operator can quickly realize situations and control the slave manipulator by operating a master input device based on the information of the virtual image. In this study, the remote operator visual support system (ROVSS) was developed for viewing support of a remote operator to perform the remote task effectively. A visual support model based on virtual environment was also inserted and used to fulfill the need of this study. The framework for the system was created by Windows API based on PC and the library of 3D graphic simulation tool such as ENVISION. To realize this system, an operation test environment for a limited operating site was constructed by using experimental robot operation. A 3D virtual environment was designed to provide accurate information about the rotation of robot manipulator, the location and distance of operation tool through the real time synchronization. In order to show the efficiency of the visual support, we conducted the experiments by four methods such as the direct view, the camera view, the virtual view and camera view plus virtual view. The experimental results show that the method of camera view plus virtual view has about 30% more efficiency than the method of camera view.

• 한국의류산업학회지
• /
• 제12권6호
• /
• pp.789-795
• /
• 2010

The purpose of this study was to examine the appropriate surplus of clothing for a jacket bodice pattern of middle-aged obese men by using the 3D virtual twin and virtual garment simulation system. The results were as follows ; 1. BMI rate of middle-aged males was 28.13 which was equivalent to mild obesity, whereas WHR(W/H ratio from waist to hips) rate was near 1.00 which was highly dangerous against their obesity. In case of middle-aged obese men, the WHR was significantly higher than the entire middle-aged men's average and the section shape in which their thickness was relatively more than width. 2. As a result of appearances evaluation through virtual garment simulation, the cut-off amount of the side seam and the center back was regulated accordingly. Hereby, the final tolerance range was set up at 21.15 cm at the hips, so that the appearances became better and the bilateral distribution of the cross section and space length was formed symmetrically. Especially in case of increasing the cross amount of hems to produce a natural silhouette of the waist-to-hips parts, the ease of buttocks was judged to be moderate, but it turned out that a wavy cross section was made and the silhouette was not good. Thus it was found to be not good that the ease of the hips became excessively increased in proportion as circumference of waist and belly were increased in obesity. The use of the virtual twin made it impossible to comprehend the appearances and ease correspondent to motions. In order to evaluate wearing fitness, therefore, the system should be improved so as to change arm positions and perform various motions.

• 전자공학회논문지D
• /
• 제35D권3호
• /
• pp.28-38
• /
• 1998

In our paper is reported a new 3D(dimensional) trajectory split approach with greatly improved efficiency for the Monte Carlo simulation of the 3D profiles of implanted ionand point defect concentrations in single-crystal silicon. This approach has been successfully implemented in our TRICSI Monte Carlo code. Combined with the previously developed model for damage accumalation in our TRICSI code, this model allows phasically based dynamic simulation of 3D profiles over an subsequent process simulation such as diffusion modeling and simulation. A typical time saving of over 10 timeshas been achieved for 3D simulation. Our method ensures much better region aground the implanted area. For 1-D simulation, the optimized condition for trajectory split has set to 3,000 pseudoparticles with 2 split branches.