• Fashion & Textile Research Journal
• /
• v.17 no.3
• /
• pp.421-428
• /
• 2015

This research is to understand customer satisfaction with virtual fitting based on a 3D body scanner and avatars as well as differences between avatars and the 'real me'. To this end, this research examined Korean college students to facilitate 3D body scanning, avatar generation and surveys. The author used 3D body scan data with direct measurements to identify differences between the 3D body scan data-based 'my avatar' and 'real me' in the virtual dress fitting system. The survey results on 'the level of customer awareness on 3D body scanner' found that the majority of both genders did not know about it and indicated a lower usability to incorporate IT technology into the fashion industry. The question in the 3D body scanning and avatar found an affirmative attitude. Satisfaction levels on the 3D avatars' similarity with 'own body' and garment fitting were positive and indicated a need for further technological improvements to express the avatars identical to customers' own body. More research is necessary for the accuracy of sizes for 3D body scanning that measure body sizes while wearing clothes. Avatars based on such datamay be less similar to 'own body' and cause customer dissatisfaction. Thus, further technology development is required to narrow gaps using data to make avatars that provide more accurate virtual fitting simulation services to customers.

• Fashion & Textile Research Journal
• /
• v.19 no.5
• /
• pp.626-634
• /
• 2017

This study investigated garment formability of the 73 breathable fabrics for sports-wear garment and their fabric mechanical properties were measured using KES-FB and FAST systems. Predicted garment formability from the mechanical properties measured using KES-FB and FAST systems was compared and discussed with fabric structural parameters. In addition, virtual 3D simulation silhouette by I-designer CAD system wear appearance by simulation using 3D CAD system. And compared with FAST finger chart by mechanical properties of FAST system. The correlation coefficients of extensibility and shear modulus between KES-FB and FAST systems were high, however, bending rigidity and compressibility showed relatively low correlation coefficients. The correlation coefficient of garment formability of breathable fabrics between KES-FB and FAST systems was 0.82. It revealed that garment formability can be predicted from fabric mechanical properties by KES-FB and FAST systems. The garment formability of nylon breathable fabric was higher than that of PET one, and the garment formability of laminated breathable fabric showed the highest value compared to coated, dot and hot melt laminated breathable fabrics. It revealed that garment formability of breathable fabrics for sports-wear can be predicted from fabric mechanical properties and garment formability was dependent on the materials, finishing method and fabric structural parameters.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.6
• /
• pp.631-640
• /
• 2012

This research project investigates the differences of various body locations (between 3D body models) and drapes garments digitally onto 3D body models. Three different subject models will be given explication. It consisted of (1) data collection of three-dimensional scans (2) creation of 3D body representations (3) comparison of avatar shapes and measurements (4) visualization and assessment of 3D body models and their 3D virtual garments. The study tests a theory of impact by differences in avatars by pattern design. A visual inspection of avatars showed clear differences between the six avatar types (in the generating process); however, there was notably less difference between 3D garment simulations based upon the six avatars produced. This demonstrated that there was less influence on the 3D garments than was predicted after a visual inspection of the avatars.

• The Research Journal of the Costume Culture
• /
• v.19 no.5
• /
• pp.1009-1018
• /
• 2011

The purpose of this study was to develop slacks patterns for middle-aged abdomen-obese adult males by using the 3D virtual-twin and virtual-garment simulation system. The criteria for subjects in this study were males who had over $25kg/m^2$ of BMI, over 90cm of waist, and over 0.90 of WHR. A total of 211 adult males who met these criteria were enrolled. The results were as follows: first, a new slacks pattern considerate of abdomen-obese men was development. The basic numerical formula were as follows: front and back hip girth H/4+3.5, front waist girth W/4+1+0.5, back waist girth W/4+1-0.5, front crotch extension H/16, back crotch extension H/8-0.5, front pleats amount 2.7, and back dart amount 1.5. Second, according to the results of the new slacks patterns appearance evaluation, the new slacks pattern scored more highly than the existing pattern in silhouette and ease amount, confirming that the new slacks pattern is appropriate for the abdomen-obese men. Also, the new slacks pattern was evaluated allowing proper space length of waist, abdomen and hip. Virtual models of production through data from a 3D body scan, pattern draft and virtual garment digital program were applied to a prototypic design method in order to enhance the fitness of ready-made garments. The use of the virtual twin made it impossible to comprehend the appearances and ease correspondent to motions. In order to evaluate wearing fitness, therefore, the system should be improved so as to change arm positions and perform various motions.

• Fashion & Textile Research Journal
• /
• v.16 no.6
• /
• pp.961-970
• /
• 2014

Several retailers such as Target and Kohle's and their vendors have piloting the 3D clothing simulation programs to produce garment samples. However, few studies have verified the virtual fit information and 3d visualization process for pants, and no study compared the commercial 3D virtual programs. This study is designed to analyze similarity of fit and appearance between real pants with 3D virtual pants based on three 3D virtual programs (Optitex, CLO 3D, and i-Designer), three lower body types (slim, normal, and thick waist type), and fit status. We selected a representative model for each lower body type, produced their custom pants according to Lee and Nam's method(2007), and took photos of front, side and back view for visual analysis. Then, we virtually tried each model's custom pants on her parametric avatar developed by manually inputting their body measurements using the three 3D virtual program. Thirty fit experts compared the real fit to virtual fit. This study found that 'Optitex' and 'i-Designer' can visualize more effectively than 'CLO 3D' in many fit locations. Regarding the body types, 3D virtual program can visualize pants fit for 'thick waist body type' more preciously than the other body types. With respect to fit status, it does not affect much on the similarity overall.

• Fashion Information and Technology
• /
• v.5
• /
• pp.41-53
• /
• 2008

• The Korean Journal of Community Living Science
• /
• v.24 no.4
• /
• pp.457-469
• /
• 2013

The purpose of this study is to quantitatively analyze the impacts of the distribution of easing contraction of the sleeve on the external appearance of bodice and sleeve through virtual clothing simulation. Virtual clothing is conducted by differentiating the sleeve easing in accordance with the experimental condition of bodice and sleeve that are followed by draping. And then the evaluation is carried out. As a result of an analysis of the similarity between the virtual garment and the actual clothing, the whole external appearance of the bodice and sleeve was expressed similarly. The external appearance according to the distribution of easing contraction got better as the easing contraction of sleeve was concentrated on sleeve cap in front while the appearance was better at the back as it was more gently distributed than in the front. In a comparison of armhole form, the clothing of which the top of it was most similar to S0 was S4 in which the gap between the armhole and the arm was the least and the front and rear silhouette fell relatively well. In a comparison between the position of bust circumference line and that of the sleeve base line, the front of the sleeve matched the bust circumference line as the easing contraction was distributed close to the center of the sleeve cap while in the back, the sleeve base line and the bust circumference line matched when some easing contraction ratio was added close to the armpit point. The cross section figures of garment space of the shoulder, the margin was evenly distributed in S4 or S5 with differing distributions of easing contraction in the front and the back. This study is significant in that it supplies the objective baseline data which makes a novice more able to make a good external appearance of the sleeve.

• Journal of the Korea Society of Computer and Information
• /
• v.9 no.4 s.32
• /
• pp.109-116
• /
• 2004

This paper describes a cloth simulation system for dressing 3D virtual human model with different pieces of clothing. The garments are constructed of cutting patterns seamed together. The system reads a body file and a cutting pattern file and produces a new model dressed with the specified garment by using a physical simulation based on a mass-spring model. For the realistic cloth simulation, it performs collision detection and response between triangles of the 3D human model and the garment. Because the number of triangles of a human model is very large. the collision detection and response requires a lot of time. To overcome this problem, we propose a pruning method which decreases the number of collision detection and response by a space-subdivision method. Experimental results show that the system produces realistic images and makes it possible to sew a garment around a virtual human body in several seconds.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.11
• /
• pp.1836-1843
• /
• 2010

This research examines the possibilities of a traditional costume revival and digital exhibition as well as the application of 3D virtual clothing modeling data in order to preserve and record a disappearing costume heritage to realize it as a social education tool through the newly emerging technology of 3D virtual clothing. A 3D revival of costumes worn by royal families and aristocrats was accomplished through the 3D animation and simulation technology of Maya 2011 (Autodesk, Inc.) and Qualoth (FX Gear, Inc.). The simulation shows the possibility of a 3D revival and digital exhibition of costume heritage. However, further technology support to analyze and realize the composition and design is still necessary to develop the digital contents of traditional garment culture that includes skirt pleats, petticoat silhouettes, that exaggerates the skirts and knots of traditional upper garments (Jeogori). Further studies on design attributes of historic costumes and the upgrading of 3D simulation software are required to realize 3D virtual clothing. Korean traditional costumes will be revived as a cultural content in the digital era as a result of outstanding issues detected by this study.

• The KIPS Transactions:PartB
• /
• v.11B no.6
• /
• pp.683-690
• /
• 2004

Garment modeling and simulation is now one of the important elements in broad range of digital contents. Though there have been recent products on garment simulation, general users do not know well enough how to design a virtual costume that meets some requirements about its specific clothing pattern. In particular, Hanbok - the Korean traditional costume - has many different characteristics against western ones in the aspect of its pattern design and of draping. This paper presents a knowledge-driven approach for virtual Hanbok modeling without knowing how to make real Hanbok. First, parameterized knowledge for several fabric types art solicited using visual similarity assessment from simulated and real cloth. Secondly, based on the analysis of designer's knowledge, we defined multi-level adjustment processes of Hanbok measurements with regard to body shape features for different virtual actors. An experimental system is developed as the form of a Maya plug-in and the result shows the applicability of the proposed method.