• 패션비즈니스
• /
• 제24권5호
• /
• pp.106-124
• /
• 2020

The purpose of this study was to analyze the three-dimensional (3D) characteristics and reproducibility of the effective expression of North American smocking pleats in the process of making clothes using a 3D virtual clothing system (CLO) and present a method of expression according to the types of North American smocking. In this study, lattice, lozenge, and flower smocking were produced as real smocking and 3D virtual content, and actual muslin properties were measured using a Fabric Kit and reflected using an emulator. The results of this study confirmed that a dense puckered design such as North American smocking could be expressed depending upon the internal line, fold angle, and reinforcement setting for 3D smocking. To partially apply pleats to flat fabrics, it was necessary to set fold lines. The fold line setting could be expressed by designing the internal line in horizontal, vertical, and diagonal directions according to the North American smocking design, and then setting the fold angle for each internal line. By setting fold angles of 0 degrees and 360 degrees according to the folding direction of the set internal line, the fabric was clearly folded and stable pleats were created. This study will contribute to the vitalization of the 3D virtual fashion content industry by analyzing and presenting the optimal expression method of sophisticated and complex pleats generated according to the North American smocking design pattern.

• 한국의류학회지
• /
• 제36권6호
• /
• pp.631-640
• /
• 2012

This research project investigates the differences of various body locations (between 3D body models) and drapes garments digitally onto 3D body models. Three different subject models will be given explication. It consisted of (1) data collection of three-dimensional scans (2) creation of 3D body representations (3) comparison of avatar shapes and measurements (4) visualization and assessment of 3D body models and their 3D virtual garments. The study tests a theory of impact by differences in avatars by pattern design. A visual inspection of avatars showed clear differences between the six avatar types (in the generating process); however, there was notably less difference between 3D garment simulations based upon the six avatars produced. This demonstrated that there was less influence on the 3D garments than was predicted after a visual inspection of the avatars.

• 패션비즈니스
• /
• 제16권2호
• /
• pp.151-162
• /
• 2012

The industry-wide development of digital technologies has also affected the textile and fashion industries immensely. The applications of 3D technology, virtual reality, and/or augmented reality systems have helped to create novel fashion brands based on the marriage of IT and textile/fashion industries. 3D digital virtual clothing systems have been developed to help the textile and fashion industries in terms of the planning, manufacturing, marketing and sales sectors. So far, most of the development effort for the 3d virtual clothing systems has been focused on the woven fabrics. The characteristics of woven fabrics differ from those of knitted fabric. Since the physical structures and mechanical properties of the knitted fabrics are definitely different from those of woven fabrics, the simulation process for the knitted fabrics should follow different approaches. The loops in a knitted fabric deform easily. The deformation results in a readily stretchable fabric appearance. Cloth simulation mostly employs models that approximate the mechanical properties of linear elastic planes. This simulation scheme does not, however, describe well enough the behavior of knitted fabrics, which deviate largely from the linear isotropic material characteristics. This study aims at characterizing the tensile deformation and surface textures of a knitted fabric product. Tensile deformation curves for the wale, course, and bias direction are analyzed. The surface texture of the knitted fabric is analyzed by using a 3-dimensional scanning device.

• 한국의류학회지
• /
• 제35권9호
• /
• pp.1112-1124
• /
• 2011

The development of computer graphics and Internet technology has created a 3D Web-based virtual world that has transformed the global fashion industry environment. In this study, the application cases of 3D virtual fashion education were analyzed to discuss the necessity and application of a 3D apparel CAD curriculum as part of a special education for global fashion talent at Korean fashion-related colleges. Prior studies, literature, photo data and Internet data (in and out of Korea) were used for this study. The demonstration case studies were conducted for the virtual fashion education 'SLCC 2007' of Buffalo State College (U.S.), 'Ratava's Line (2004)' of SFU/FIT Collaborative Design Project (Canada and U.S.) and '2011 Graduation Fashion Show' of Ueda Fashion College (Japan). The results of the study show that the 3D apparel CAD system (as a core technology of the IT fashion industry) would allow the current mass production concept to change to a new paradigm of 'mass customization' along with new fashion business types that include global fashion companies and Web-based Internet, mobile and virtual-world shopping malls. In addition, it appears that the system should be included in the curriculum of fashion-related colleges and institutes to educate technical designers for the global fashion industry and global fashion talent with comprehensive system operation and management ability, and to promote single proprietor companies.

• 패션비즈니스
• /
• 제17권6호
• /
• pp.28-43
• /
• 2013

Recent trends toward the collaborations among various sectors of academia and research areas have brought interests and significances in new activities especially in the fashion and textile areas. One of the collaboration examples is the recent research projects on 3D virtual clothing systems based on the 3D CAD software. The 3D virtual clothing systems provide simulated apparels with high degrees of fidelity in terms of color, texture, and structural details. However, since real fabrics exhibit strong nonlinearity, anisotropy, viscoelasticity, and hysteresis, the 3D virtual clothing systems need fine tuning parameters for the simulation process. In this study, characteristics of silk fabrics, which are woven by using degummed silk and raw silk yarns, are being analyzed and compared. Anisotropic properties may be measured as warp and filling direction properties separately in woven fabrics, such as warp tensile stress or filling bending rigidity. Hysteretic properties may be measured as bending hysteresis or shear hysteresis by using KES measurements. These data provide deformation-force relationships of the fabric specimen. Three-dimensional effects obtained when using these characteristic fabrics are also analyzed. The methods to control the three-dimensional appearance of the sewn fabric specimens when utilizing a programmable microprocessor-based motor device, as prepared in this study, are presented. Based on the physical and mechanical properties measured when using the KES equipment, the property parameters are being into a 3-dimensional virtual digital clothing system, in order to generate a virtual clothing product based on the measured silk fabric properties.

• 한국의류산업학회지
• /
• 제23권6호
• /
• pp.826-835
• /
• 2021

The purpose of this study was to compare the similarity between actual and virtual pants using a virtual 3D CLO program. A subject corresponding to the average size of a women in her twenties was selected and an avatar with the same specifications was produced. Silhouettes of the pants were classified into trousers, slacks, and wide pants and images of actual and virtual pants were evaluated from the front, side, and back. The results were as follows: Overall, the resemblance of the trousers was evaluated higher than that of other pants. The average similarity of trousers was 4.20 at the front, 3.98 at the side, and 4.17 at the back, which was much like the actual clothing. In contrast, that of the slacks was 3.62, 3.73, and 3.79 and of the wide pants was 3.81, 3.53, and 3.97. The similarity between the actual and virtual clothing was relatively well reproduced when the shape of the pants was like the silhouette of the human body. However, if the pants were tight or loose, virtual fits failed to display the wrinkles caused by the tightness or the excessive slack. The virtual fit showed fewer wrinkles and did not depict the location and the shape of hemlines as accurately as the actual fit, although virtual fits adequately displayed the baseline and dart on the pants.

• 복식문화연구
• /
• 제31권5호
• /
• pp.627-639
• /
• 2023

This study seeks to increase the satisfaction of elderly men when purchasing and wearing ready-to-wear clothes by designing a slacks pattern suitable for their body type, which is determined by analyzing their lower bodies using virtual avatars and 3D virtual simulation system. The study found the following. First, based on virtual visualization of the comparison slacks pattern, the waistline position was consistently the lowest scored question among the evaluation survey items. Interpretation of this dissatisfaction suggests that, because the front waistline falls below the abdomen, the lower body, and especially the abdominal shape, is unpleasantly emphasized. Second, by using a virtual simulation system, the study developed a new slacks pattern that considered the concerns of elderly men. The primary measurement changes were as follows: front waist girth W/4+1.5cm+0.5cm, back waist girth W/4+1.5cm-0.5cm, front hip girth H/4+2.5cm-0.5cm, back hip girth H/4+2.5cm+0.5cm. Third, the new slacks pattern's appearance was evaluated more highly than the comparison pattern, confirming the new pattern's appropriateness for elderly men. This study demonstrates how slacks and other clothing patterns designed in a 3D virtual garment simulator can be used to design more appealing clothing for elderly men, increasing the satisfaction of wearing ready-made clothes at older ages.

• 패션비즈니스
• /
• 제16권6호
• /
• pp.36-51
• /
• 2012

Quilting, a technique to join two or more layers of fabrics, has long been used in the textile and fashion sectors. To evaluate dimensional effect of quilting that changes according to the characteristics of fabrics, 3D scanning method is employed in this study. Goal of this study is to interpret how fabric's composition, stiffness, thickness, and weight affect the appearance when quilted fabrics are used in a garment. Surface reconstruction method based on 3D scanning is used as a research method to evaluate the changing appearance depending on the material properties quantitatively with the quilting method. Besides, exemplary virtual clothing is realized through a virtual quilting method in 3D digital clothing system based on the properties of fabrics.

• 한국의류산업학회지
• /
• 제23권2호
• /
• pp.237-246
• /
• 2021

This study aims to analyze short sleeve cycling tops from three brands for a change in garment fit and pressure depending on the static and cycling postures. To this end, it used a 3D virtual garment system to virtualize the garments. Further, a cross-section of the 3D virtual garment data was obtained, and the space length was measured in the design-X program to prove the objectivity of the 3D virtual garment. The results indicated that three brands had a large space length at the front than the back because of the bent posture in cycling. Therefore, appropriate ease was required for the waist and abdomen. Although there were various cutting lines of the bodice panel by brand, the design of the cutting lines should consider the changes in the surface to reflect the bent posture in cycling. The results of this experiment confirmed that the wrinkles present in the 3D virtual garment were reflected in the cross-section and that the space length was small in the high-stress area, as shown in red. Therefore, it was proven the stress of the 3D virtual garment could be used for 3D virtual garment evaluation.

• 패션비즈니스
• /
• 제24권4호
• /
• pp.63-84
• /
• 2020

It is essential to consider the heavy industrial working environment factors which are regarded as harmful to workers' health and safety and suitable work motion factors for the workers' motion while developing the work clothes for painting workers in the machinery and shipbuilding industries. This study suggests the use of 3D virtual clothing simulations as a solution to protect the human body from hazardous working conditions accompanying the development of painting work clothes and assessing the work motion performance associated with the comfort while workers wear them during the work clothes. The initial aim of the study is to examine a male avatar to run work motions simultaneously within a 3D virtual clothing simulator, secondly, to present the simulation images of coverall type men's painting work clothes with the application of two experimental painting work motions and one control motion to the avatar, and finally, to present the distance analysis images of the painting work clothes and the avatar body and air gap rates through the analysis of cross-sections of the avatar body while wearing the coverall work clothes according to the work motions. The results showed that the distance degree of painting work clothes to the avatar body for each part of the human body when performing painting work motions. Moreover, 3D virtual clothing simulations enabled the creation of a male model avatar to run painting work motions together and the painting work clothes developed were found to be suitable for the painting work motions.