• 제목/요약/키워드: 3D structure

검색결과 6,775건 처리시간 0.037초

여뀌과 이형경식물의 Dinorphism과 Bisexuality의 변화 (STUDIES ON THE DIMORPHISM AND TRANSITION OF BISEXUALITY OF HETEROSTYLOUS POLYGONACEAE)

  • Harn, Chang-Yawl
    • Journal of Plant Biology
    • /
    • 제3권2호
    • /
    • pp.6-18
    • /
    • 1960
  • The present experiments were designed in order to clarify the differences between the long and short styled plants and the transgressive gradition in the degree of dimorphism among the three heterostylous species of the Polygonus, P. japonica, F. esculentum, and P. senticosa, based on investigations regarding the floral structure, ecological and physiological traits, the results of which are summarized as follows: (1) P. japonica, although it exhibits typical dimorphism, has undergone so high a differentiation between long and short styled that its long styled individuals behave as if they were female; and short styled individuals as if male. In long-styled individuals, filament, anther, and pollen grains show signs of degeneration, most of the pollen being abortive. On the other hand, in short styled individuals, the filament, anther, and pollen grains have attained remarkable development; the pollen grians are large and fertile. In short-plant the fertilized flowers readily drop off in every stage of their embryo development. This species has completely lost the self-fertile property, which is characteristic of the non-dimorphic Polygonum genus. Although this specsei typically exhibits the physiological characteristics of the non-dimorphic Polygonum genus. Although this specisei typically exhibits the physiological characteristics of dimorphism in controlled pollination, the short-styled individuals bear no seed in nature, thus misleading taxonomists to idenfity the short-styled plant as male. 2) The morphological feature of the flower organ of P. senticosa obviously indicates definite dimorphism. Physiologically, however, no differentiation towards dimorphism was observed, the species still retaining, both in long and short-individuals, the self-fertile property common to the Polygonum genus. Elaborate examinations revealed that regardless of the modes of pollination, both fertiization and seed setting flourish, no differentiation betwen legitimate and illegitimate unions being recognizable. This sort of physiological property has not been observed in the investigations of other heterostylous plants. It is assumed that this species is differentiated structurally into dimorphism, but not yet physiologically. In nature, however, this plant would have more opportunities to be cross-pollinated, i.e., legitimately combined, than self-pollinated because of the development of two forms of flowers. 3) In terms of heterostylism, the F. esculentum just occupies the intermediate position between P. japonica and P. senticosa structurally, ecologically, and physiologically. Doescription of some of the physiological behavior of the plant will suffice to demonstrate the above facts. While P. japonica has completely lost its self-fertile property, P. senticosa still retains it wolly. In F. esculentum 2-6% of self-fertility is the result in illegitimate combination. There occur occasionally hereditary self fertile individuals among some of the F. or 20 min. irradiation plot, when they reach any stage of the same bacterial population. In addition to this increase of total population in the plots with the more dose of UV light irradiation, it seems that the more dose of UV light irradiation is the more shortened the generation time of Azotobacter. Therefore, it is clear that variation of reproductive rate must be, mere or less, due to the genetic effects induced by UV light irradiation. On the other hand, the lag phase or logarithmic growth phase in nonirradiated culture is shortened prominently, and this must be due to the difference in bacterial number of the original inoculm. The generation time of Azotobacter is shortened by exogeneous treatment of nuclei acid derivatives, and the degree is greater in case of DNA derivatives than RNA dervatives. W.H. Price reported that the rate of ribose nucleic acid to protein in Staphylococcus muscae is proportional to the generation time: that is the faster the cell can form ribose nucleic acid, the more rapid its growth. This explains the shortening of generation time by exogeneous RNA derivatives in this work reasonably. On the other hand, it is well known that the desoxyribose nuclic acid content per cell is constant and independent of the generation time. A.D. Laren and W.N. Takahashi reported that the infectious RNA from TMV is 6 times as sensitive to inactivation by UV as it is in the form of intact virus, and that inactivation of infectious TMV involves onlu a local change on RNA chain. But, the effect of exogeneous DNA in this work suggests that irradiated living cell which cotain DNA bring about some change on DNA moleculs as well as RNA molecules. And if the mutagenic effects of UV take into consideration, it is very reasonable. Therefore, it is clear that the variation of the generation time by UV irradiation is, more or less, due to the genetic effects. Therefore, it seems that the shortness of the average lifewpan of Azotobacter by UV irradiation is resulted not only from the influence of the environmental conditions, but also from the variation of genetic factor of the individual.

  • PDF

HWE방법에 의한 CdSe 박막 성장과 광전기적 특성 (Growth of CdSe thin films using Hot Wall Epitaxy method and their photoelectrical characteristics)

  • 홍광준;이관교;이상열;유상하;신용진;서상석;정준우;정경아;신영진;정태수;김택성;문종대;김혜숙
    • 센서학회지
    • /
    • 제6권4호
    • /
    • pp.328-336
    • /
    • 1997
  • HWE 방법에 의해 CdSe 박막을 (100)방향 Si 기판 위에 성장시켰다. 증발원과 기판의 온도를 각각 $600^{\circ}C$, $430^{\circ}C$로하여 성장시킨 CdSe 박막의 이중 결정 X-선 요동곡선(DCRC)의 반폭치(FWHM)값이 380 arcsec로 가장 작았다. Van der Pauw 방법으로 Hall 효과를 측정하여 운반자농도의 In n 대 (1/T)에서 구한 활성화에너지는 0.19eV로 측정되었다. Hall 이동도의 온도 의존성은 30K에서 150K까지는 $T^{3/2}$에 따라 증가하여 불순물산란에 기인하고, 150K에서 293K까지는 $T^{-3/2}$에 따라 감소하여 격자산란에 기인한 것으로 고찰되었다. 광전도셀의 특성으로 spectral response, 최대 허용소비전력(MAPD), 광전류와 암전류(pc/dc)의 비 및 응답시간을 측정하였다. Cu 증기분위기에서 열처리한 광전도셀의 경우, 감도(${\gamma}$)는 0.99, pc/dc은 $1.39{\times}10^{7}$, 그리고 최대 허용소비전력(MAPD)은 335mW, 오름시간(rise time)은 10ms, 내림시간(decay time)은 9.5ms로 가장 좋은 광전도 특성을 얻었다.

  • PDF

미래전을 대비한 한국군 발전방향 제언: 미국의 모자이크전 수행개념 고찰을 통하여 (A Proposal for Korean armed forces preparing toward Future war: Examine the U.S. 'Mosaic Warfare' Concept)

  • 장진오;정재영
    • 해양안보
    • /
    • 제1권1호
    • /
    • pp.215-240
    • /
    • 2020
  • 2017년 8월 미(美) 국방성 산하 DARPA(Defense Advanced Research Projects Agency)는 "모자이크전(mosaic warfare)"이라는 새로운 전투방식을 제안하였다. DARPA의 전략기술국장(Director of Strategic Technology Office) Timothy Grayson에 따르면 모자이크전이란 "지정된 위치에 딱 들어맞아야 제 역할을 할 수 있는 특정 모양의 "퍼즐조각(puzzle pieces, 특정임무가 지정된 플랫폼)"이 아니라 호환 가능한 "타일(tile, 센서 및 타격 기능)"이 복합체계로 구성된 전투방식"이다. 모자이크전 이론 및 최근 동향을 살펴보기에 앞서, 모자이크전에 대한 배경과 몇 가지 핵심전제를 분석하였다. 미 국방성은 중국 A2/AD에 대한 자국 자산의 방호가 극도로 제한된다는 점을 암묵적으로 인정하고 있다. 또한 미국은 여전히 다른 나라의 영토와 영공에서도 완전한 군사적 우위를 추구하고자 한다. 미국은 모자이크전을 통한 재빠른 전투손실 회복력, 인명피해 최소화로 대량의 물량이 필요한 소모전도 감수할 수 있을 것이다. 모자이크전의 핵심은 "의사결정 중심전(Decision Centric Warfare)"이다. 이를 구현하기 위해 아군에게는 적응력과 융통성을, 적에게는 복잡성과 불확실성을 제공하는 것으로, 인간의 "지휘(command)"와 기계의 "통제(control)"를 결합·활용하여 분산된 전력의 신속한 구성 및 재구성한다. 이를 통해 우군에게 더 많은 방책을 제공하고, 궁극적으로 상대의 의사결정 체계(OODA loop)를 붕괴시킨다. 이런 모자이크전 수행을 위한 핵심 요소는 적응형 킬웹(Adaptable kill web), 조합형 전력 패키지, 인공지능, 상황중심 C3 구조 등이 있다. 최근 CSBA(Center for Strategic and Budgetary Assessments)에서는 모자이크전의 의사결정과 관련하여 의미 있는 워게임 결과를 발표했다. 전통적인 전투수행 조직/방식(전통적 팀)과 모자이크전 수행방식의 팀(모자이크팀)간 분명한 차이점이 발견되었는데, 모자이크팀에서 더 많은 동시다발적 작전 수행 및 복잡성으로 상대의 의사결정 체계를 압도하고, 우군의 인명손실은 적었다. 또한 우군의 의사결정 속도를 증가시켜 지휘관 작전적 템포를 보다 신속하게 할 수 있었다. 한국군의 발전방향으로 우선 우리 안보환경을 고려한 '모자이크전'에 대한 연구와 발전이 필요하다. 미래전에 대비하여 영역에 상관없이 전력을 조합할 수 있는 전반적 군 구조를 검토해야 한다. 제한된 국방재원과 예산을 고려하여 선택과 집중이 필요하며, 주변국의 미래전 발전 동향에 대해 예의주시해야 한다.

  • PDF

경제어산의 음악적 성격과 송암창(唱)과의 비교 고찰 - 안채비소리를 중심으로 (A Comparative on Musical Style of Gyeongjae-Eosan and Comparison to Songam-chang(唱))

  • 차형석
    • 공연문화연구
    • /
    • 제39호
    • /
    • pp.801-833
    • /
    • 2019
  • 본고는 선행연구에서 규명된 경제 안채비소리의 음악적 유형 결과를 토대로 경제어산 원명창의 범패가 어떤 성격의 악곡인지를 검토해 보았다. 그리고 동류 악곡인 송암창 범패와의 비교를 통해 두 창자 간의 음악적 차이에 대해서도 고찰해 보았다. 연구 결과를 정리하면 다음과 같다. 경제어산 설회인유편의 <개문경희응기어초면>과 소청사자편의 <유치>는 안채비소리의 여러 성(聲)들 가운데 유치성으로 가창된다는 것을 알 수 있었다. '주요선율형'과 '맺는형'이 유치성의 음악적 특징과 대체로 유사했고, 창자 간의 차이는 주요선율형 D형과 맺는형 b형에서 다소 발견 되었다. 특히 소청사자편 <유치>에서는 '맺는형'의 두 유형 가운데 a형만이 발견되므로 종지음은 sol로 통일된 것을 알 수 있었다. 짜임새의 기본적 틀은 선행 연구에서 규명된 바, 유치성의 구조적 형태를 그대로 유지하고 있음을 확인할 수 있었다. 다만 동일한 성(聲)이라 하더라도 악절의 '주요선율형' 조합은 획일화되어 있지 않았으며 악곡에 따라 주요선율형의 조합이 다양하게 짜여진 것을 발견할 수 있었다. 경제어산 봉송사자편 <수설수륙대회소>는 안채비소리 가운데 광의적으로 편게성에 속하며 세부적으로 소성임을 알 수 있었다. 특히 선행연구에서 소성의 '맺는선율'과 <수설수륙대회소>의 종지선율이 유사했으며 '맺는형'은 약간의 차이를 보였다. 이와 같은 차이는 원명창이 도약 진행하는 선율보다 순차 하행하는 특징이 더 두드러진다는 점과의 관련성이 있다. 악절의 짜임새는 선행연구와 별반 다르지 않았고, 송암창의 엮음은 3소박 리듬의 경향이 짙은데 비하여 원명창은 전반적으로 2소박 리듬의 경향이 보인다는 점에서 차이가 있었다.

한국 제조업의 기술적 효율성 국제 비교 분석 (International Comparative Analysis of Technical efficiency in Korean Manufacturing Industry)

  • 이동주
    • 무역학회지
    • /
    • 제42권5호
    • /
    • pp.137-159
    • /
    • 2017
  • 본 연구는 한중일과 OECD 가입국을 포함한 총 18개국의 제조업을 11개 부문으로 구분하여 각 국의 산업별 기술적 효율성을 추정하고 비교 분석하였다. 생산성의 전통적인 관점은 기술혁신이나 공정혁신 등을 통해 생산능력을 높이는 것이지만 생산과정의 기술적 효율성에 의해서 가장 큰 영향을 받게 되는데 이러한 생산의 기술적 효율성을 추정하는 대표적인 방법이 확률적 프런티어 생산모형(Stochastic Frontier Production Model: SFM)을 이용한 분석 방법이다. 먼저 산출변수를 총산출 또는 부가가치로 각각 설정하여 확률적 프런티어 생산함수를 추정한 결과, 둘 다 노동, 자본, 중간재 투입의 경우 모든 제조업 부문에서 투입량이 늘어날수록 산출량이 유의하게 증가하는 것으로 나타났다. 한편, 연구개발 투자는 화학, 전자, 기계 산업 등에서 산출량에 미치는 영향이 큰 것으로 나타났다. 이어서 생산함수를 통해 기술적 효율성을 추정한 결과를 보면, 산출변수를 총산출로 설정한 경우 부문별 전체 평균이 0.8이상의 값을 보이면서 대부분 높은 수준의 효율성을 나타내었다. 하지만 부가가치로 설정한 경우에는 일본이 대부분의 제조업 부문에서 가장 높은 수준을 나타내었으며, 다른 국가들은 총산출 기준의 효율성보다 낮은 수준으로 나타났다. 한중일 3개국을 비교해보면, 대부분의 제조업 부문에서 일본이 가장 높은 효율성을 나타내었으며 우리나라는 일본의 절반이나 3분의 1 수준, 중국은 우리나라 보다 낮은 수준으로 나타났다. 하지만 식품과 전자 부문에서는 중국이 우리나라보다 높게 나타나 이들 부문에서는 중국의 생산 효율성이 크게 향상되었음을 알 수 있다. 이처럼 우리나라는 중국의 빠른 성장에 비해 상대적으로 일본과의 격차를 좁히지 못하고 있으므로 산업별로 기술개발을 촉진하는 다양한 정책적 지원이 요구된다. 이와 함께 제조업 생산성 향상을 위해서는 기술개발뿐만 아니라 기술적 효율성을 제고할 수 있는 경제구조로의 전환도 필요하다고 할 수 있다.

  • PDF

해저공간의 합리적 활용을 위한 분석적 연구 (An Analytical Study on Rational use of Undersea Space)

  • 정원조;박남기
    • 한국항해항만학회지
    • /
    • 제47권3호
    • /
    • pp.147-154
    • /
    • 2023
  • 본 연구는 인간이 새롭게 거주할 수 있는 해저공간 플랫폼과 관련하여 그 필요성, 역할, 활용, 운영관리 방안을 도출하는 데 그 의의가 있다. 현재 해저공간 활용을 위한 해양수산부 연구개발 사업에 참여하고 있는 산학연관 협약기관 종사자들과 해양분야 기술개발에 참여하고 있는 외부전문가의 의견을 토대로 해저공간 창출의 필요성과 운영방안에 대해 종합적 의견을 제시하는데 그 목적이 있다. 본 연구는 한국형 해저공간 플랫폼 건설에 참여하고 있는 연구자를 대상으로 설문조사를 실시하였고 해양분야 기술개발 전문가들을 대상으로 표적집단면접(FGI)를 실시하였으며 그 결과를 도출하였다. 분석 결과, 해저공간 플랫폼의 건설 필요성은 높은 것으로 나타났으며, 해저공간 플랫폼의 역할로는 해저공간 활용 기술개발 및 해양과학 연구기능 확보 의견이 가장 많았다. 해저공간 플랫폼 조성이 국내 산업에 긍정적 영향을 미칠 것으로 조사되었으며, 특히 심해개발산업, 조선 해양구조물산업에 가장 영향을 많이 미칠 것으로 나타났다. 활용적 측면에서는 해저공간 테스트베드가 종료된 후 해양관측기지 및 해양생태계연구로의 활용 답변이 가장 높은 비중을 가졌으며, 예상되는 불편한 점으로는 심리적 환경에서의 불편을 가장 높게 나타났다. 전문가들은 향후 안정적 운영을 위해 지속적인 예산확보가 무엇보다 중요하고, 항목별 예산에서는 인력예산의 확보가 필수적이며, 따라서 확실한 재원조달처 발굴, 신규 연계사업의 발굴 등이 가장 중요한 이슈일 것으로 의견을 제시하였다. 아울러 사업 종료 이후 활용 시 고려되어야 할 소유문제, 위탁관리문제, 비용문제를 확실히 하기 위해 사전 협약 당시부터 확립하고 대비책을 마련한 후 사업을 추진하는 것이 적절할 것으로 판단했다.

한국산(韓國産) 주요(主要) 수종(樹種) 수피(樹皮)의 이학적(理學的) 성질(性質)에 관(關)한 연구(硏究) -소나무속(屬), 사시나무속(屬), 참나무속(屬)을 중심(中心)으로- (Studies on the Physical Properties of Major Tree Barks Grown in Korea -Genus Pinus, Populus and Quercus-)

  • 이화형
    • 한국산림과학회지
    • /
    • 제33권1호
    • /
    • pp.33-58
    • /
    • 1977
  • 수피(樹皮)는 원목(原木) 체적(體積)의 10~20%를 차지하고 있으며 일반적(一般的)을 운반(運搬), 제거(除去), 처리(處理)에 따른 비용에 비(比)해 효용가치(効用價値)는 적다. 뿐만아니라 세계적(世界的)인 임산자원(林産資源)의 부족(不足)에 따른 전수체이용화(全樹體利用化)의 개념이 점고(漸高)되면서부터 수피(樹皮)의 이용(利用)에 관심(關心)을 가지게 되었다. 본연구(本硏究)는 수피(樹皮)에 대(對)한 연구(硏究)가 전무(全無)한 국내(國內)의 실적(實積)에 비추어 국내주요(國內主要) 수종(樹種) 수피(樹皮)는 소나무속(屬), 사시나무속(屬), 참나무속(屬)을 대상(對象)으로 수피(樹皮)의 물리기계적(物理機械的) 성질(性質)을 구명(究明)하고 수피(樹皮)의 가능(可能)한 이용(利用) 책을 위한 기본적 성질을 밝히고자 하였다. 본(本) 연구(硏究)에서 사용(使用)한 공시수피(共試樹皮)는 서울대학교(大學校) 농과대학(農科大學) 부속연습림(附屬演習林)과 임업시험장(林業試驗場) 중부지장(中部支場) 부근에서 벌채이용(伐採利用)이 적령기(適齡期)에 달(達)하고 포고직경(胞高直徑)이 동급(同級)인 건전하고 정상적(正常的)으로 생장(生長)하는 입목(立木)의 흉고직경 부위(部位)에서 수종별(樹種別) 20주(株)씩 $200cm^2$로 채취(採取)하였다. 물리적(物理的) 성질(性質)로는 수피(樹皮) 전건비중(全乾比重), 내피(內皮) 및 외피(外皮)의 생수피(生樹皮) 함수량(含水量), 섬유포화점(纖維飽和點), 수분이력곡선(水分履歷曲線), 전수축율(全收縮率), 흡수량(吸收量), 비열(比熱), 습윤열(濕潤熱), 열전도도(熱傳導道), 열확산(熱擴散), 시차열분석(示差熱分析) 및 발열량(發熱量)을 측정(測定) 연구(硏究)하였다. 다음 기계적(機械的) 성질(性質)로는 곡강도(曲强度)와 압축강도(壓縮强度)를 측정연구(測定硏究)하였으며 본(本) 연구(硏究)에서 얻은 결론(結論)은 다음과 같다. 1. 전건비중(全乾比重)은 같은 개체(個體) 내(內)에 있어서도 목질부(木質部)와 수피간(樹皮間)에 차이(差異)가 있을 뿐아니라 수피(樹皮)에 있어서도 내피(內皮)와 외피간(外皮間)의 차이(差異)가 있다. 2. 수피(樹皮)의 전건비중(全乾比重)이 목질부(木質部) 비중(比重)보다 높은 사실(事實)은 수피내(樹皮內)의 사부섬유(篩部纖維) 및 보강세포(保强細胞)가 많이 있다는 해부적(解剖的)인 구조적(構造的) 특징(特徵)에 기인(基因)한다. 3. 전건비중(全乾比重)에 있어서 잣나무를 제외하고는 내피비중(內皮比重)이 외피비중(外皮比重)보다 높았으며 이는 내피(內皮)보다 높은 수축율(收縮率)에 기인(基因)한다. 4. 수피내(樹皮內)의 해부적(解剖的) 구조(構造)에 있어서 사요소(篩要素)의 구성비율(構成比率)이 높을수록 함수율(含水率)은 높아지고 후막조직(厚膜組織)과 주피조직(周皮組織)이 많으면 많을수록 함수율(含水率)은 떨어진다. 5. 수피(樹皮)의 섬유포화점(纖維飽和點)을 습윤열측정(濕潤熱測定)에 의(依)하여 구(求)할 수 있는 가능성(可能性)을 제시(提示)하였으며 그 결과(結果) 소나무에서는 26~28%사이에 상수리나무에서는 24~28%사이에 있는 것으로 나타났으나 이에 대(對)한 것은 금후연구(今後硏究)에 의(依)하여 더 밝혀져야 할 것이다. 6. 수피(樹皮)의 수축율(收縮率)은 목질부(木質部)와는 달리 경단방향(經斷方向)에서 제일 높고 수축방향(樹縮方向)에서 제일 낮았으나 졸참나무와 굴참나무에서는 열외(列外)이었다. 7. 수피(樹皮)의 비열(比熱)은 목질부(木質部)와 같고 습윤열(濕潤熱)은 목질부(木質部)보다 다소 높았다. 열전도도(熱傳導度)는 목재(木材)보다 낮으며 전건수피비중(全乾樹皮比重)과 수증기비중(水蒸氣比重)을 알고 열전도도(熱傳導度)를 계산할 수 있는 다음과 같은 회귀방정식(回歸方程式)을 유도(誘導)하였고 이 방정식(方程式)에 의(依)하여 얻어진 열전도도(熱傳導度) 수치는$(0.8{\sim}1.6){\times}10^{-4}cal/cm{\cdot}sec{\cdot}deg$이었다. $$K=4.631+11.408{\rho}d+7.628{\rho}m$$ 8. 수피(樹皮)의 열확산(熱擴散)은 $(8.03{\sim}4.46){\times}10^{-4}cm^2/sec$이며 시차열분석(示差熱分析)의 결과(結果)에 의(依)하면 발열량(發熱量)은 발열반응(發熱反應)이 시작(始作)되기 전(前)까지는 목질부(木質部)가 높고 발열반응(發熱反應)이 시작(始作)되면서부터는 수피(樹皮)가 목질부(木質部)보다 상회(上廻)하였다. 9. 경단방향(經斷方向)의 수피곡강도(樹皮曲强度)는 수피비중(樹皮比重)에 비례(比例)하고 회귀식(回歸式)은 M=243.78x-12.02(F=31.41)이었고 압축강도(壓縮强度)는 목질부(木質部)와는 달리 경단방향(經斷方向)이 가장 높고, 경단방향(經斷方向), 수축방향순(樹軸方向順)으로 적어졌다.

  • PDF

Memory Organization for a Fuzzy Controller.

  • Jee, K.D.S.;Poluzzi, R.;Russo, B.
    • 한국지능시스템학회:학술대회논문집
    • /
    • 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
    • /
    • pp.1041-1043
    • /
    • 1993
  • Fuzzy logic based Control Theory has gained much interest in the industrial world, thanks to its ability to formalize and solve in a very natural way many problems that are very difficult to quantify at an analytical level. This paper shows a solution for treating membership function inside hardware circuits. The proposed hardware structure optimizes the memoried size by using particular form of the vectorial representation. The process of memorizing fuzzy sets, i.e. their membership function, has always been one of the more problematic issues for the hardware implementation, due to the quite large memory space that is needed. To simplify such an implementation, it is commonly [1,2,8,9,10,11] used to limit the membership functions either to those having triangular or trapezoidal shape, or pre-definite shape. These kinds of functions are able to cover a large spectrum of applications with a limited usage of memory, since they can be memorized by specifying very few parameters ( ight, base, critical points, etc.). This however results in a loss of computational power due to computation on the medium points. A solution to this problem is obtained by discretizing the universe of discourse U, i.e. by fixing a finite number of points and memorizing the value of the membership functions on such points [3,10,14,15]. Such a solution provides a satisfying computational speed, a very high precision of definitions and gives the users the opportunity to choose membership functions of any shape. However, a significant memory waste can as well be registered. It is indeed possible that for each of the given fuzzy sets many elements of the universe of discourse have a membership value equal to zero. It has also been noticed that almost in all cases common points among fuzzy sets, i.e. points with non null membership values are very few. More specifically, in many applications, for each element u of U, there exists at most three fuzzy sets for which the membership value is ot null [3,5,6,7,12,13]. Our proposal is based on such hypotheses. Moreover, we use a technique that even though it does not restrict the shapes of membership functions, it reduces strongly the computational time for the membership values and optimizes the function memorization. In figure 1 it is represented a term set whose characteristics are common for fuzzy controllers and to which we will refer in the following. The above term set has a universe of discourse with 128 elements (so to have a good resolution), 8 fuzzy sets that describe the term set, 32 levels of discretization for the membership values. Clearly, the number of bits necessary for the given specifications are 5 for 32 truth levels, 3 for 8 membership functions and 7 for 128 levels of resolution. The memory depth is given by the dimension of the universe of the discourse (128 in our case) and it will be represented by the memory rows. The length of a world of memory is defined by: Length = nem (dm(m)+dm(fm) Where: fm is the maximum number of non null values in every element of the universe of the discourse, dm(m) is the dimension of the values of the membership function m, dm(fm) is the dimension of the word to represent the index of the highest membership function. In our case then Length=24. The memory dimension is therefore 128*24 bits. If we had chosen to memorize all values of the membership functions we would have needed to memorize on each memory row the membership value of each element. Fuzzy sets word dimension is 8*5 bits. Therefore, the dimension of the memory would have been 128*40 bits. Coherently with our hypothesis, in fig. 1 each element of universe of the discourse has a non null membership value on at most three fuzzy sets. Focusing on the elements 32,64,96 of the universe of discourse, they will be memorized as follows: The computation of the rule weights is done by comparing those bits that represent the index of the membership function, with the word of the program memor . The output bus of the Program Memory (μCOD), is given as input a comparator (Combinatory Net). If the index is equal to the bus value then one of the non null weight derives from the rule and it is produced as output, otherwise the output is zero (fig. 2). It is clear, that the memory dimension of the antecedent is in this way reduced since only non null values are memorized. Moreover, the time performance of the system is equivalent to the performance of a system using vectorial memorization of all weights. The dimensioning of the word is influenced by some parameters of the input variable. The most important parameter is the maximum number membership functions (nfm) having a non null value in each element of the universe of discourse. From our study in the field of fuzzy system, we see that typically nfm 3 and there are at most 16 membership function. At any rate, such a value can be increased up to the physical dimensional limit of the antecedent memory. A less important role n the optimization process of the word dimension is played by the number of membership functions defined for each linguistic term. The table below shows the request word dimension as a function of such parameters and compares our proposed method with the method of vectorial memorization[10]. Summing up, the characteristics of our method are: Users are not restricted to membership functions with specific shapes. The number of the fuzzy sets and the resolution of the vertical axis have a very small influence in increasing memory space. Weight computations are done by combinatorial network and therefore the time performance of the system is equivalent to the one of the vectorial method. The number of non null membership values on any element of the universe of discourse is limited. Such a constraint is usually non very restrictive since many controllers obtain a good precision with only three non null weights. The method here briefly described has been adopted by our group in the design of an optimized version of the coprocessor described in [10].

  • PDF

식물 치사관련 유전자를 이용하는 신규 제초제 작용점 탐색 및 조절물질 개발동향 (A prognosis discovering lethal-related genes in plants for target identification and inhibitor design)

  • 황인택;이동희;최정섭;김태준;김범태;박유신;조광연
    • 농약과학회지
    • /
    • 제5권3호
    • /
    • pp.1-11
    • /
    • 2001
  • 신규 제초제 작용점의 발굴은 유전체학과 조합화학 등 새로운 기술이 등장하여 그 가능성이 높아지고 있다. 대략 $10^{30}$에서 $10^{50}$여 개의 화학물질의 합성이 가능하고 50,000여 개의 식물 유전자 지도가 완성되어 이들의 조합으로 새로운 제초제의 작용점 발굴 가능성이 높아지게 될 것이다. 즉, 고등식물이 가지고 있는 50,000여 개의 유전자 가운데 0.1%, 1.0% 또는 10%가 신규 작용점이 된다면 50, 500, 5000개의 신규 작용점을 발견할 수 있는 것이다. 신규 제초제의 개발을 위해서는 target enzyme의 선택과 결정, 저해제의 설계, 작용점까지 도달하는 과정, 대사적인 운명 등 여러가지 요인들이 검토되어야 한다. 이러한 과정에서 가장 중요한 것은 확실한 작용점의 선택에 있다. 또한 다양한 생화학적 정보를 통하여 작용점/효소의 저해로부터 고사에 이르는 과정을 이해함은 물론 보다 강력한 저해제의 합성과 살초과정을 이해할 수 있어야 할 것이다. 그 동안에는 이미 알려진 작용점을 대상으로 신규 화합물을 합성하거나 유도체를 개발하는 것이 대부분이었지만 최근에는 antisense 기법 등을 활용하여 새로운 치사관련 작용점을 찾아내는데 잠재력과 가능성을 확대시켜주고 있다. 새로운 치사관련 작용점을 발굴한 후에는 대상효소의 화학적, 생화학적 기능과 단백질의 구조를 분석하여 강력한 저해제를 설계하는데 활용하게 될 것이다. 치사관련 돌연변이체와 antisense 기법을 활용하고, 식물 생리학적 반응을 기초로 하여 리드화합물을 탐색하는 것은 새로운 접근방식이며 농약 화학적 특성을 갖는 효소 저해제들의 합성은 크게 6가지로 할 수 있다. 공통특이시얀 기질 유사체 합성, affinity labels, 자살기질체, 반응중간산물, 그리고 extraneous site inhibitors 등을 들 수 있다. 이와 같은 방법으로 후보화합물이 선발된다 하여도 실제식물에 처리하여 흡수, 이행, 대사 등에 관한 시험이 반드시 이루어져야 새로운 제초제를 탄생시킬 수 있다. 또한 약물의 전달과정과 무독화작용을 통하여 pro-herbicide에 대한 연구를 진행하게 될 것이며, 마지막으로 잡초와 작물간의 선택성이 고려되어야 효소 측이적 접근방식에 의한 신규 선택성 제초제의 개발이 성공할 수 있는 것이다.

  • PDF

한국 재래 닭 고환 간질세포의 미세구조에 관한 연구 (The Ultrastructure of Leydig Cells in the Testis of Korean Native Chickens)

  • 장병귀;태현진;최철환;박영재;양홍현;김남수;박상열;강형섭;박병용;이영훈;안동춘;김인식
    • 한국가금학회지
    • /
    • 제33권3호
    • /
    • pp.181-188
    • /
    • 2006
  • 한국 재래 닭에서 부화 후부터 성숙에 이르는 시기까지 고환 발달동안 간질세포의 미세구조를 구명하기 위하여 부화 후 1, 2, 4, 6, 8, 10, 12, 14, 16, 18, 21, 28, 32, 44, 52 및 64주령(n=13마리/일령)의 한국 재래 닭을 이용하여 이 연구를 수행하였다. 한국 재래닭의 고환은 2.5% glutaraldehyde를 이용하여 전신관류고정하고 조직 처리 과정을 거쳐 Epon-araldite에 포매하였다. 초박절편기를 사용하여 $1{\mu}m$로 절편한 다음 methylene blue로 염색하여 일반적인 조직의 변화상을 관찰하였고 간질세포의 미세구조는 초박 절편을 제작하여 투과전자현미경으로 관찰하였다. 간질세포내에서 테스토스테론과 연관성이 있는 미세구조인 사립체, 평활형질내세망 및 지방방울의 변화에 따라 간질세포의 발달 유형을 분류하면, 1) 간질세포가 치밀하게 배열되어 있고 세포 사이의 공간이 거의 없으며 핵이 간질세포 용적의 많은 부분을 차지하고 있는 시기로 핵은 전자밀도가 높은 유형과 희박한 유형으로 나눌 수 있었고, 또한 세포질 내에는 많은 양의 지방방울, 소량의 사립체 및 평활형질내세망을 갖고 있는 시기, 2) 세포질 내에 큰 폭으로 확장된 평활형질내세망, 풍부한 사립체 및 감소된 지방방울을 갖고 있는 시기로 나눌 수 있다.