• 한국지반공학회논문집
• /
• 제19권5호
• /
• pp.163-173
• /
• 2003

본 연구에서는 억지말뚝으로 보강된 사면에서 한계평형 해석법과 3차원 해석 결과를 비교 분석하였다. 특히, 유한차분법을 이용한 FLAC 3D를 바탕으로 하는 커플링 해석에 주안점을 두었으며, FLAC을 이용하여 전단강도감소기법에 따른 보강사면의 안전율을 계산하기 위해 FLAC의 내장언어인 FISH를 이용하여 작성하였다. 커플링 해석에서 억지말뚝에 의한 안정화된 사면을 해석하기 위해 말뚝의 거동과 사면안정을 동시에 고려하였다. 따라서 본 연구에서는 이 두 방법을 적용하여 일렬 억지말뚝이 사면선단, 중앙부, 정부에 위치할 경우에 있어서 각각의 활동 파괴면 및 안전율을 비교 분석하였으며 강도정수 감소법을 적용한 해석기법의 적용성과 타당성에 대한 분석을 수행하였다.

• 터널과지하공간
• /
• 제30권1호
• /
• pp.98-107
• /
• 2020

노천채광에서 경제적인 채광을 위한 채광장 형성은 매우 중요하며, 대규모 채광을 위한 발파작업은 사면의 안정성에 영향을 미칠 수 있으므로 이에 대한 고려가 필요하다. 본 연구에서는 사면설계와 발파 조건을 달리하면서 사면 안정성에 미치는 영향 인자의 기여율을 검토하였다. 설계인자는 암반의 물성, 사면각도, 벤치높이이며, 발파 조건은 장약량과 거리를 달리하여 반영하였다. 사면의 안전율은 3차원 모델링을 통해 전단강도감소기법으로 산출하였으며, 기여율은 암반사면의 물성이 94.8%로 다른 설계인자들에 비해 상대적으로 높았으며, 사면각도 0.89%, 벤치높이 0.58%, 발파는 3.73% 정도의 영향을 미치는 것으로 나타나, 사면과 근접거리에서의 발파는 사면의 안정성에 영향을 줄 수 있음을 알 수 있다.

• Structural Engineering and Mechanics
• /
• 제41권3호
• /
• pp.339-348
• /
• 2012

The slope stability analysis is usually done using the methods of calculation to rupture. The problem lies in determining the critical failure surface and the corresponding factor of safety (FOS). To evaluate the slope stability by a method of limit equilibrium, there are linear and nonlinear methods. The linear methods are direct methods of calculation of FOS but nonlinear methods require an iterative process. The nonlinear simplified Bishop method's is popular because it can quickly calculate FOS for different slopes. This paper concerns the use of inverse analysis by genetic algorithm (GA) to find out the factor of safety for the slopes using the Bishop simplified method. The analysis is formulated to solve the nonlinear equilibrium equation and find the critical failure surface and the corresponding safety factor. The results obtained by this approach compared with those available in literature illustrate the effectiveness of this inverse method.

• 한국환경복원기술학회지
• /
• 제4권2호
• /
• pp.74-83
• /
• 2001

The purpose of this study was investigate to the influence of forest roads characteristics and environment factors on the soil erosion, stability and vegetation survival of cut slope in forest roads. The results obtained could be summarized as follows; 1. The correlated factors between slope erosion and variables in cut slope were altitude, convex, degree of slope, length of slope and soil depth. In the stepwise regression analysis, length of slope and soil hardness was a high significant and its regression equation was given by -89.6136 + 15.0667X14 + 16.6713X15($R^2$ = 0.6712). 2. The main factors influencing the stability of cut slope were significant in order of coverage, middle, convex, length of slope and north, and its discriminant equation was given by -1.019 + 0.064X22 - 0.808X8 - 0.622X24 + 0.742X11 - 0.172X14 - 0.545X6 ($R^2$ = 0.793). 3. The centroids value of discriminant function in the stability and unstability estimated to 1.244 and -1.348, respectively. The boundary value between two groups related to slope stability was -0.1038. The prediction rate of discriminant function for stability evaluation of was as high as 91.3%. 4. The dominant species of invasion vegetation on the cut slope consist with Carex humilis, Agropyron tsukushiense var. transiens, Calamagrostis arundinacea, Miscanthus sinensis var. purpurascens, and Ixeris dentata in survey area. The rate of vegetation invasion more increased by time passed. 5. The life form of invasion vegetation in cut slop showed to $H-D_1-R_{2,3}-e$ type of the hemicryptophyte of dormancy form, dissem inated widely by wind and water of dissminule type, moderate extent and narrowest extent of radicoid type, erect form of growth form. 6. The correlated factors between forest enviroment and coverage appeared north, passage years and middle position of slope at 5% level. The forest environment factors influencing the invasion plants in survey area were shown in order to altitude, passage years, rock(none), forest type(mixed) and stone amount. The regression equation was given by 17.5228 - 0.0911X3 + 3.6189X28 15.8493X22 19.8544X25 + 0.3558X26 ($R^2$ = 0.4026).

• Structural Engineering and Mechanics
• /
• 제20권3호
• /
• pp.313-334
• /
• 2005

The paper presents a new approach for the analysis of slope stability that is based on the numerical solution of a differential equation, which describes the thrust force distribution within the potential sliding mass. It is based on the evaluation of the thrust force value at the endpoint of the slip line. A coupled approximation of the slip and thrust lines is applied. The model is based on subdivision of the sliding mass into slices that are normal to the slip line and the equilibrium differential equation is obtained as the slice width approaches zero. Opposed to common iterative limit equilibrium procedures the present method is straightforward and gives an estimate of slope stability at the value of the safety factor prescribed in advance by standard requirements. Considering the location of the thrust line within the soil mass above the trial slip line eliminates the possible development of a tensile thrust force in the stable and critical states of the slope. The location of the upper boundary point of the thrust line is determined by the equilibrium of the upper triangular slice. The method can be applied to any smooth shape of a slip line, i.e., to a slip line without break points. An approximation of the slip and thrust lines by quadratic parabolas is used in the numerical examples for a series of slopes.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2017년도 학술발표회
• /
• pp.260-260
• /
• 2017

This study aims to compare the performance of TRIGRS (Transient Rainfall Infiltration and Grid-based Regional Slope-stability model) and TiVaSS (Time-variant Slope Stability model) in the prediction of rainfall-induced shallow landslides. TRIGRS employs one-dimensional (1-D) subsurface flow to simulate the infiltration rate, whereas a three-dimensional (3-D) model is utilized in TiVaSS. The former has been widely used in landslide modeling, while the latter was developed only recently. Both programs are used for the spatiotemporal prediction of shallow landslides caused by rainfall. The present study uses the July 2011 landslide event that occurred in Mt. Umyeon, Seoul, Korea, for validation. The performance of the two programs is evaluated by comparison with data of the actual landslides in both location and timing by using a landslide ratio for each factor of safety class ( index), which was developed for addressing point-like landslide locations. In addition, the influence of surface flow on landslide initiation is assessed. The results show that the shallow landslides predicted by the two models have characteristics that are highly consistent with those of the observed sliding sites, although the performance of TiVaSS is slightly better. Overland flow affects the buildup of the pressure head and reduces the slope stability, although this influence was not significant in this case. A slight increase in the predicted unstable area from 19.30% to 19.93% was recorded when the overland flow was considered. It is concluded that both models are suitable for application in the study area. However, although it is a well-established model requiring less input data and shorter run times, TRIGRS produces less accurate results.

• 한국산림과학회지
• /
• 제107권4호
• /
• pp.385-392
• /
• 2018

석산개발 지역 퇴적장 석축사면의 사면 조성 및 관리기술 증진을 위하여 현황측량을 실시하고, 대표단면을 선정하여 사면의 안정성 해석을 수행한 결과를 요약하면 다음과 같다. 사면안정 해석을 위하여 선정한 대표단면의 퇴적장 최하단부 사면(A) 경사는 $59^{\circ}$로서 급경사를 이루고 있으나, 전체 퇴적장 사면(A, B, C, D, E, F)의 평균경사는 $38.5^{\circ}$이었다. 퇴적장 사면의 수평거리는 총 66.2 m, 사면높이는 48.3 m이지만 퇴적장 석축사면의 경사는 비교적 급하며, 시각적으로도 불안정해 보인다. 사면안정 해석에는 건조시와 포화시를 고려하였으며 포화시의 사면안정 해석은 대상사면이 완전히 포화된 상태를 모델링하여 수행하였다. 지반의 강도정수는 석축과 배면지반으로 구분하고 안전성을 검토하였다. 건기시 안전율은 1.850, 우기시 안전율은 1.333으로 나타나 건기시 및 우기시의 안전율 1.5와 1.2를 상회하여 사면의 활동에 대하여 모두 안전한 것으로 나타났다. 그러나 집중호우 시 퇴적장 사면 상부의 풍화된 마사토는 사면침식과 붕괴 위험성이 높아 배수로 설치 등 적절한 유지관리를 통한 안정대책이 필요하다고 생각된다.

• 한국지반공학회논문집
• /
• 제27권12호
• /
• pp.39-52
• /
• 2011

본 연구에서는 유한요소해석 및 전단강도 감소기법을 적용하여 가압식 그라우팅 쏘일네일로 보강된 사면의 시공 단계를 고려한 사면안정 해석을 수행하였으며 무보강 자연사면 및 중력식 그라우팅 쏘일네일로 보강된 사면의 안전율과 비교함으로써 가압식 그라우팅 쏘일네일의 사면 보강효과를 분석하였다. 그 결과, 가압식 그라우팅 쏘일네일로 보강된 사면의 안전율이 중력식 그라우팅 쏘일네일로 보강된 사면에 비해 50% 이상 크게 나타났으며, 쏘일네일의 길이가 증가할수록 가압에 따른 보강효과가 우수한 것으로 나타났다. 또한 가압에 의해 사면 활동파괴영역이 확대됨에 따라 사면 전단저항 능력이 증가하는 것을 확인하였으며, 쏘일네일의 인발저항력이 사면보강에 가장 큰 영형을 미치는 것을 알 수 있었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.1391-1404
• /
• 2006

Recently, medium or slight earthquakes was occurred in the Korea Peninsula and seismic design is considered seriously in the railroad facilities as case of other civil engineering facilities. In this study, it selected the Seongnam-Yeoju railroad 6th section and seismic analysis was accomplished. Specially, unlike existing seismic analysis using the artificial earthquake and the real earthquake, seismic analysis using a seismic vibration and the train vibration was accomplished. 1-D and 2-D ground response analysis of the railroad bed and 3-D Finite element analysis in the bridge connection section of high landfill slope was accomplished. Also, slope stability analysis and the evaluation of liquefaction was accomplished.

• Geomechanics and Engineering
• /
• 제14권1호
• /
• pp.71-81
• /
• 2018

Soils are mostly nonhomogeneous and anisotropic in nature. In this study, nonhomogeneity and anisotropy of soil are taken into consideration by assuming that the cohesion increases with depth linearly and also varies with respect to direction at a particular point. A three-dimensional rotational failure mechanism is adopted, and then a three-dimensional stability analysis of slope is carried out with the failure surface in the shape of a curvilinear cone in virtue of the limit analysis method. A quasistatic approach is used to develop stability charts in nonhomogeneous and anisotropic soils. One can easily read the safety factors from the charts without the need for iterative procedures for safety factors calculation. The charts are of practical importance to prevent a plane failure in excavation slope whether it is physically constrained or not. Then the most suitable location of piles within the reinforced slope in nonhomogeneous and anisotropic soils is explored, as well as the interactions of nonhomogeneous and anisotropic coefficients on pile reinforcement effects. The results indicate that piles are more effective when they are located between the middle and the crest of the slope, and the nonhomogeneous coefficient as well as the anisotropic coefficient will not only influence the most suitable location for piles but also affect the calculated safety factor of existing reinforced slope. In addition, the two coefficients will interact with each other on the effect on slope reinforcement.