Browse > Article
http://dx.doi.org/10.12989/gae.2018.14.1.071

Stability charts and reinforcement with piles in 3D nonhomogeneous and anisotropic soil slope  

Xu, Jingshu (School of Civil Engineering, Central South University)
Li, Yongxin (School of Civil Engineering, Central South University)
Yang, Xiaoli (School of Civil Engineering, Central South University)
Publication Information
Geomechanics and Engineering / v.14, no.1, 2018 , pp. 71-81 More about this Journal
Abstract
Soils are mostly nonhomogeneous and anisotropic in nature. In this study, nonhomogeneity and anisotropy of soil are taken into consideration by assuming that the cohesion increases with depth linearly and also varies with respect to direction at a particular point. A three-dimensional rotational failure mechanism is adopted, and then a three-dimensional stability analysis of slope is carried out with the failure surface in the shape of a curvilinear cone in virtue of the limit analysis method. A quasistatic approach is used to develop stability charts in nonhomogeneous and anisotropic soils. One can easily read the safety factors from the charts without the need for iterative procedures for safety factors calculation. The charts are of practical importance to prevent a plane failure in excavation slope whether it is physically constrained or not. Then the most suitable location of piles within the reinforced slope in nonhomogeneous and anisotropic soils is explored, as well as the interactions of nonhomogeneous and anisotropic coefficients on pile reinforcement effects. The results indicate that piles are more effective when they are located between the middle and the crest of the slope, and the nonhomogeneous coefficient as well as the anisotropic coefficient will not only influence the most suitable location for piles but also affect the calculated safety factor of existing reinforced slope. In addition, the two coefficients will interact with each other on the effect on slope reinforcement.
Keywords
soil nonhomogeneity and anisotropy; three-dimensional; upper bound; piles; safety factor of slope;
Citations & Related Records
Times Cited By KSCI : 7  (Citation Analysis)
연도 인용수 순위
1 Clarke, S.D., Smith, C.C. and Gilbert, M. (2013), "Modelling discrete soil reinforcement in numerical limit analysis", Can. Geotech. J., 50(7), 705-715.   DOI
2 Deng, D.P., Zhao, L.H. and Li, L. (2014), "Limit equilibrium slope stability analysis using the nonlinear strength failure criterion", Can. Geotech. J., 52(5), 563-576.   DOI
3 Erzin, Y. and Cetin, T. (2014), "The Prediction of the critical factor of safety of homogeneous finite slopes subjected to earthquake forces using neural networks and multiple regressions", Geomech. Eng., 6(1), 1-15.   DOI
4 Gao, Y.F., Ye, M. and Zhang, F. (2015), "Three-dimensional analysis of slopes reinforced with piles", J. Centr. South U., 22(6), 2322-2327.   DOI
5 Han, C.Y., Chen, J.J. and Xia, X.H. (2014), "Three-dimensional stability analysis of anisotropic and non-homogeneous slopes using limit analysis", J. Centr. South U., 21(3), 1142-1147.   DOI
6 He, S., Ouyang, C.J. and Luo, Y. (2012), "Seismic stability analysis of soil nail reinforced slope using kinematic approach of limit analysis", Environ. Earth Sci., 66(1), 319-326.   DOI
7 Ito, T. and Matsui, T. (2011), "Design method for stabilizing piles against landslide-one row of piles", Soil Found., 21(1), 21-37.   DOI
8 Ji, J. and Liao, H.J. (2014), "Sensitivity-based reliability analysis of earth slopes using finite element method", Geomech. Eng., 6(6), 545-560.   DOI
9 Latha, G.M. and Garaga, A. (2010) "Stability analysis of a rock slope in Himalayas", Geomech. Eng., 2(2), 125-140.   DOI
10 Li, X.P., He, S.M. and Wang, C.H. (2006), "Stability analysis of slopes reinforced with piles using limit analysis method", Adv. Earth. Struct., 9(151), 105-112.
11 Li, X.P., He, S.M. and Wu, Y. (2010), "Seismic displacement of slopes reinforced with piles", J. Geotech. Geoenviron. Eng., 136(6), 880-884.   DOI
12 Liu, Y.R., Wu, Z.S., Chang, Q., Li, B. and Yang, Q. (2015), "Stability and reinforcement analysis of rock slope based on elasto-plastic finite element method", J. Centr. South U., 22(7), 2739-2751.   DOI
13 Michalowski, R.L. and Dresher, A. (2009), "Three-dimensional stability of slopes and excavations", Geotechnique, 59(10), 839-850.   DOI
14 Michalowski, R.L. and Martel, T. (2011), "Stability charts for 3d failures of steep slopes subjected to seismic excitation", J. Geotech. Geoenviron. Eng., 137(2), 183-189.   DOI
15 Nian, T.K., Chen, G.Q. and Luan, M.T. (2008), "Limit analysis of the stability of slopes reinforced with piles against landslide in nonhomogeneous and anisotropic soils", Can. Geotech. J., 45(8), 1092-1103.   DOI
16 Pan, Q.J. and Dias, D. (2016), "The effect of pore water pressure on tunnel face stability", J. Numer. Anal. Met. Geomech., 40(15), 2123-2136.   DOI
17 Pan, Q.J. and Dias, D. (2017), "Upper-bound analysis on the face stability of a non-circular tunnel", Tunn. Undergr. Sp. Technol., 62, 96-102.   DOI
18 Portioli, F., Casapulla, C., Gilbert, M. and Cascini, L. (2014), "Limit analysis of 3D masonry block structures with nonassociative frictional joints using cone programming", Comput. Struct., 143, 108-121.   DOI
19 Utili, S. (2013), "Investigation by limit analysis on the stability of slopes with cracks", Geotechnique, 63(2), 140-154.   DOI
20 Shukla, S.K. and Bathurst, R.J. (2012), "An analytical expression for the dynamic active thrust from c-$\phi$ soil backfill on retaining walls with wall friction and adhesion", Geomech. Eng., 4(3), 209-218.   DOI
21 Xu, J.C. (2013), "Analytic hierarchy process for assessing factors influencing the stability of soil slopes reinforced with piles", Environ. Earth Sci., 70(4), 1507-1514.   DOI
22 Yang, X.L. (2017), "Effect of pore-water pressure on 3D stability of rock slope", Int. J. Geomech., 17(9), 06017015.   DOI
23 Yang, X.L. (2018), "Lower bound analytical solution for bearing capacity factor using modified Hoek-Brown failure criterion", Can. Geotech. J., https://doi.org /10.1139/cgj-2016-0694.   DOI
24 Yang, X.L. and Yao, C. (2018), "Stability of tunnel roof in nonhomogeneous soils", Int. J. Geomech., https://doi.org/10.1061/(ASCE)GM.1943-5622.0001104.   DOI
25 Yang, X.L. and Zhang, R. (2017), "Collapse analysis of shallow tunnel subjected to seepage in layered soils considering joined effects of settlement and dilation", Geomech. Eng., 13(2), 217-235.   DOI
26 Yang, X.L., Li, Z.W., Liu, Z.A. and Xiao, H. B. (2017), "Collapse analysis of tunnel floor in karst area based on Hoek-Brown rock media", J. Centr. South U., 24(4), 957-966.   DOI
27 Zhang, Y. (2015), "Effect of hydraulic distribution form on the stability of a plane slide rock slope under the nonlinear Barton-Bandis failure criterion", Geomech. Eng., 8(3), 391-414.   DOI
28 Zheng, D.F., Nian, T.K., Liu, B., Yin, P. and Song, L. (2015), "Coefficient charts for active earth pressures under combined loadings", Geomech. Eng., 8(3), 461-476.   DOI