• Journal of Conservation Science
• /
• v.34 no.6
• /
• pp.471-479
• /
• 2018

Seonunsa Temple is a site of Dancheong cultural significance in Daewoongjeon. Three-dimensional (3D) scanning can be used to create a simulation in 1:1 ratio without touching the Dancheong patterns directly. The traditional method of recreating Dancheong was paining with tracing paper using a fix pin. However, manual direct copy processes can cause and damage to the objects. This study shows the results of a simulation of a tranditional Dancheong patterns as an alternative; the simulation was able to reduce dimensional errors and prevent damage by using 3D scanning. As a result, objective and precise proportions of the simulation were acquired. The 3D scanning method may be applied for work such as the replication and restoration of the drawing, 3D fabrication of the original data, and printing of the additional drawing. In addition, with the production of 3D materials, a virtual museum is possible.

• Journal of Fashion Business
• /
• v.18 no.6
• /
• pp.38-56
• /
• 2014

This study compared the flared skirts on 3D simulation and in real to show diverse forms in women's clothing depending on the body's gait and motion. By finding the problems, we suggested the possible methods for utilizing the 3D simulation in the clothing industry. First, the 3D simulation of flared skirts showed similar forms of appearance according to the flare length and volume. However, virtually formed drape shape was even in size and spacing, whereas it was not even in real. Second, according to the results of appearance test on the length and flare volume at $90^{\circ}$ and $180^{\circ}$, both real and 3D simulation skirts were evaluated to have outstanding appearances regardless of the skirt length. However, as the flares volume increased, the skirts with longer length were evaluated to have superior appearances compared to the skirts of shorter length. Third, it showed higher resemblance between the real and virtual simulation, when the skirt had less flare and as the skirt length shortened. However, it showed greater difference between the real and virtual simulation when flare volume and length increased. The length and volume of the skirt and the physical properties of the material are predicted to be different between the real and virtual simulation. However, they usually are similar in forms, so it is believed possible to use for predicting the design's silhouette or the feel when it is worn. This method can be applied on internet shopping malls, which can possibly reduce unnecessary time and expenses.

• The Research Journal of the Costume Culture
• /
• v.15 no.3 s.68
• /
• pp.446-460
• /
• 2007

This study shows that digital technology is adapted practical method in fashion design process and virtual simulation and cyber fashion gallery based on virtual reality are researched. This study is proposed the 3D fashion design simulation in the virtual space used on 3D studio max, poser, photoshop program according to fashion design process. The main design concept is "temporary bridge" from rainbow. This study is supposed six fashion design in accordance with three sub-theme under main concept by changing color and texture used on 3D simulation. The results of this study are as follows: 1. This study produced Cyber Fashion Gallery in virtual space to the form of CD Rom title and web title by Macromedia Director 8.5, Macromedia Flash, Sound Forge. And it is enlarged the field of expression in aspect of Fashion Exhibition, beyond restriction of time and space. 2. Clothes modelling tools is able to easily adapt to various textiles and patterns in 3D dynamic virtual mannequin before making clothes. Digital technology is able to express image changed color and texture, especially new material, multi-finishing material and brilliant material and so on. So this study is able to develop tools for study of fashion coordination. 3. Cyber Fashion Gallery consists of gallery, story, painting, symbolism, example, image, quit. This study is enlarged the range of clothing expression by digital technology and open to possibility customized-manufacture.

• The Journal of the Korea Contents Association
• /
• v.9 no.8
• /
• pp.198-207
• /
• 2009

Recently, it was possible to represent the realistic clothes in the cloth simulation along with growth of 3D computer animation such as visual contents. In addition, because of the development of H/W(Hardware) and S/W(Software), the accessibility and participation are growing. However, in order to make the image of high quality of 3D animation, the optimized production pipeline was need. In this paper, in order to overcome the limitation of exiting 3D computer animation production pipeline, we propose the optimized production pipeline of the cloth simulation. Our production pipeline makes the optimization arrangement in consideration of the mobility in order to supplement the related structure limit toward each part of the existing pipeline. Moreover, by utilizing the dummy cloth the association nature with the animation part is solved and a performance is improved. The proposal pipeline actually introduced to the animation production. And then we can improve the performance production time and production manpower consumption. Consequently, our pipeline is guaranteed an optimized work by emphasizing a connection in the direct image production.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.6
• /
• pp.997-1002
• /
• 2017

Underwater communication, which is used acoustic channel of 1500[m/s] speed being different of wireless electric wave in terrestrial communication, is sensitive on water temperature and salinity and also affected from 3D underwater space. 3D underwater communication is sensitive on propagation loss of acoustic wave and underwater noise with complexity of communication space. In this paper, transmission performance with consideration of these characteristics of 3D underwater communication environments is measured and analyzed on MANET operated on 3D underwater communication environments. Some underwater MANET operation conditions will be suggested. Computer simulation with underwater simulator based on NS-2 will be used for performance measure, performance parameter like as throughput, transmission delay, packet loss rate and consumed energy will be used in simulation for performance measure.

• Journal of Drive and Control
• /
• v.16 no.3
• /
• pp.51-58
• /
• 2019

The objective of this study was to investigate a simulation technology for the AM field based on ANSYS Inc.. The introduction of metal 3D printing AM process, and the examining of the present status of AM process simulation software, and the AM process simulation processor were done in the previous study (part 1). This present study (part 2) examined the use of the AM process simulation processor, presented in Part 1, through direct execution of Topology Optimization, Ansys Workbench, Additive Print and Additive Science. Topology Optimization can optimize additive geometry to reduce mass while maintaining strength for AM products. This can reduce the amount of material required for additive and significantly reduce additive build time. Ansys Workbench and Additive Print simulate the build process in the AM process and optimize various process variables (printing parameters and supporter composition), which will enable the AM to predict the problems that may occur during the build process, and can also be used to predict and correct deformations in geometry. Additive Science can simulate the material to find the material characteristic before the AM process simulation or build-up. This can be done by combining specimen preparation, measurement, and simulation for material measurements to find the exact material characteristics. This study will enable the understanding of the general process of AM simulation more easily. Furthermore, it will be of great help to a reader who wants to experience and appreciate AM simulation for the first time.

• Journal of the Korea Society for Simulation
• /
• v.15 no.1
• /
• pp.51-58
• /
• 2006

Virtual Manufacturing is a powerful methodology for developing a new product, new equipment and new production system. It enables the checking errors in design before production. This paper is a case study of virtual manufacturing in an excavator factory. The final welding operations of the boom and the rotating table of upper body are selected for application. 3D models of parts and fixtures are developed with $CATIA^{(R)}$ and 3D simulation models are developed with $IGRIP^{(R)}$. These models are used for verifying the design of fixture and for the motion design of robot. As a result, the manual welding systems are replaced by automatic systems and many design errors are corrected in the design phase, which reduces the developing cost and time.

• Elastomers and Composites
• /
• v.52 no.3
• /
• pp.216-223
• /
• 2017

The additive manufacturing technology, also called 3D printing, is growing fast. There are several methods for 3D printing. Fused deposition modeling (FDM) type 3D printing is the most popular method because it is simple and inexpensive. Moreover, it can be used for printing various thermoplastic materials. However, it contains the cooling of layered road and causes thermal shrinkage. Thermal shrinkage should be controlled to obtain high-quality products. In this study, temperature distribution and cooling behavior of a layered road with cooling are studied through computer simulation. The thermal shrinkage of the layered road was simulated using the calculated temperature distribution with time. Shape variation of the layered road was predicted as cooling proceeded. Stress between the bed and the layered road was also predicted.This stress was considered as the detaching stress of the layered road from the bed. The simulations were performed for various thermal conductivities and temperatures of the layered road, bed temperature, and chamber temperature of a 3D printer. The simulation results provide detailed information about the layered road for FDM type 3D printing under operational conditions.

• Journal of International Society for Simulation Surgery
• /
• v.1 no.1
• /
• pp.23-26
• /
• 2014

The aim of this report is to evaluate accuracy using3D surgical simulationand digitally printedwafer in orthognathic surgery. 22-year-old female was diagnosed with mandibular prognathism and apertognathia based on 3D diagnosis using CT. Digital dentition images were taken by laser scanning from dental cast, and each STL images were integrated into one virtual skull using simulation software. Digitalized intermediate wafer was manufactured using CAD/CAM software and 3D printer, and used to move maxillary segment in real patient. Constructed virtual skull from 1 month postoperative CT scan was superimposedinto simulated virtual model to reveal accuracy. Almost maxillo-mandibular landmarks were placed in simulated position within 1 mm differences except right coronoid process. Thus 3D diagnosis, surgical simulation, and digitalized wafer could be useful method to orthognathic surgery in terms of accuracy.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1468-1473
• /
• 2009

Efficient communication of construction information has been critical for successful project performance. Building Information Modeling (BIM) has appeared as a tool for efficient communication. Through 3D CAD objects, it is possible to check interception and collisions of each object in advance. In addition, 4D simulation based on 3D objects integrated with time information makes it realize to go over scheduling and to perceive potential errors in scheduling. However, current scheduling simulation is still at a stage of animation due to manual integration of 3D objects and scheduling data. Accordingly, this study aims to develop an integrated model of 3D CAD objects that automatically creates scheduling information.