• 한국의류학회지
• /
• 제26권5호
• /
• pp.703-714
• /
• 2002

This paper proposed the basic consideration for the reliable 3-D measurement and analysis of middle-aged women's breast using 3-D phase-shifting moire topography. The surface borderline of the breast based on the anatomical structure on the skin was suggested. Various breast dimensions that can be measured using 3-D measurement system and their measuring methods were discussed. Tips for the measurement of sagged breast were also proposed. It is expected that these basic considerations contribute to draw attention to the reliable measurement of women's breast and provide a kind of tools for the standardization of 3-D shape measurement of breast.

• Composites Research
• /
• 제36권6호
• /
• pp.454-460
• /
• 2023

최근 온실가스 배출량에 대한 규제가 높아지면서 IMO는 온실가스 배출량을 2050년까지 순 배출량 '0'을 목표로 하며 온실가스 규제를 강화하고 있다. 또한 조선/해양 분야에서는 추진 효율 향상, 구조 경량화와 같이 운항비 절감이 중요하다. 현재 이와 관련하여 구조 경량화와 고강성을 만족하기 위하여 3D 프린트 복합재료를 이용한 위상 최적화에 대한 연구가 수행되고 있다. 본 연구에서는 3D 프린트 복합재료를 활용하여 선박 구조물인 방향타의 내부에 3가지 위상 형상(육각형, 사각형, 삼각형)을 적용하였다. 방향타에 위상 형상을 적용하였을 때 적합한 형상을 알아보기 위해 구조해석을 수행했다. 선속 8 knots의 조건에서 타 각 0°에서 30°까지 10° 간격으로 CFD 해석을 수행하였으며, CFD 해석 결과를 바탕으로 하중조건을 설정하였다. 방향타 내부 위상 형상을 고려한 구조 해석 결과 삼각형, 사각형, 육각형 위상 형상 순으로 우수한 성능을 갖는 것을 확인하였다. 사각형 위상 형상을 가지는 방향타가 삼각형 위상 형상을 가지는 방향타 대비 78.5%의 무게를 가지며 경량화 측면을 고려하였을 때 사각형 위상 형상이 우수하다고 판단된다.

• 소성∙가공
• /
• 제10권4호
• /
• pp.294-301
• /
• 2001

The sensitivity method has been applied to find perform shape that results in the desired shape after foring. As a 2D example, initial shape of specimen for the cylinder shape without barrelling after forging has been found. The method is then applied to various shapes of 3D free forging and initial shapes of the corresponding specimens after forging have been found successfully The sensitivity method is proven to be an effective and accurate tool for the preform design.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1057-1062
• /
• 2008

Representing a complex, three-dimensional shape, such as an automobile, requires a large amount of CAD data consisting of millions of approximated discontinuous points, which makes it difficult or even impossible to efficiently optimize the entire shape. For this reason, in this paper, function based design method is proposed to optimize the external shape of an automobile. A vehicle modeling function was defined in the form of a Bernstein polynomial to smoothly express the complex 2D and 3D automobile configurations. The sub-sectional parts of the vehicle modeling function are defined as section functions through classifying each subsection of a box model. It is shown that the use of the vehicle modeling functions has the useful advantages in an aerodynamic shape optimization.

• 복식
• /
• 제66권8호
• /
• pp.46-60
• /
• 2016

Countries have different brassiere patterns, and this study produced and compared 3/4 brassiere patterns from different countries to determine the difference in patterns, and to investigate the stress distribution and shape of cross section while wearing brassieres using 3D virtual fitting system. Despite the growing interest in underwear, there is a lack of related books and research on brassiere patterns, which causes the difference in sizes and pattern drafting methods by countries. Thus, research on this is needed. 3D virtual fitting system has been introduced to compare patterns, thereby improving visible effects and reducing the loss in cost caused by underwear pattern fitting test. According to the result of pattern analysis, The Secoli type exhibited the least breast cover rate (14.9 cm), while the largest cover rate was shown in Christina and ESMOD types (17.7 cm). It is believed that the difference in pattern drafting causes the difference in the total length of a brassiere. Furthermore, the Secoli, Moda Burgo, and ESMOD brassieres drafted from basic bodice pattern were found to be longer than the Christina and Han Sunmi brassieres attained from direct pattern drafting. Moreover, the darts' volume of upper and lower cups in Christina and Han Sunmi types was similar in shape. The shapes of cradle drafted from basic bodice pattern were a straight line, while those from direct drafting formed a curved shape. In fitting multiple cross sections, the Secoli, Moda Burgo, and ESMOD brassieres had gaps between the brassieres and the body. Among these, the largest number of gaps was observed in the ESMOD type pattern. This study aimed at performing comparative analysis of various brassieres' pattern drafting types as a basic research for developing a brassiere pattern drafting type.

• 복식문화연구
• /
• 제16권3호
• /
• pp.488-501
• /
• 2008

The purpose of this study presents bra pattern using the 3D measurements of the upper body subject to women in their 30's. Brassieres available in the market are mostly designed for straight body shape and many women seem to have experienced bearing discomfort in a great extent as they grow older. Brassieres should be designed to cover diverse body types and the accurate measurement of body type and breast shape is needed to accomplish that. As for the study method, 3D human body types were analyzed with RapidForm 2006, and the upper-body types and breast shapes were statistically classified through technical statistics analysis, cluster analysis, t-test, variance analysis, and cross analysis. The wearing tests went through the comparison of the brassieres of three makers in the market and the experiment brassieres(first and second) and then the evaluations were made by the subjects, the outer appearance assessment by experts, and 3D measurements. The results of this study showed that the evaluation of experiment brassieres was excellent in every item, and the significant difference was found out particularly in the items of pressure, rear center, front center, breast underneath, adequate level by wing, and adequate level by armhole. According to the results of 3D evaluation, experiment brassieres had a highest point in fitness with no physical pressure at the wing part and no overall deviation at the cup part.

• 제어로봇시스템학회논문지
• /
• 제17권11호
• /
• pp.1159-1167
• /
• 2011

A novel 3D tube scanning technique is proposed. The proposed tube scanning technique is developed for a special tube inspection module which consists of four line-lasers and one camera. Using the scanning module, we can reconstruct the 360 degree shapes of the inner surfaces of a cylindrical tube. From an image frame captured by the camera, we reconstruct a partial tube model based on four laser triangulations. Then by aligning such partial models with respect to a reference tube axis, a complete 3D shape of the tube is reconstructed. The tube axis in each reconstructed frame is aligned with a 3D Euclidean transformation to the reference axis. Several experiments show that the proposed method can align multiple tube axes very accurately and reconstruct 3D shapes of a tube with very low shape distortion.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.225-226
• /
• 2012

Nowadays the widely used media in architecture include visualizations, animations and three-dimensional models. An optimized 3D digital method using active CAM(Computer Aided Manufacturing) and CNC(Computerized Numerical Control) imaging is developed for accurate shape and 3D measurements in freeform buildings in this paper. In contrast to a conventional building using auto CAD system and others, the proposed active digital optimization is based on a combination of 3D numerical data and parametric 3D model. The objective of this paper is therefore to present digital optimization method for constructability of freeform building. The 3D digital optimization method is appropriate to serious variations in freeform shape. The developed digital optimization method is necessary to be carried out to verify the robustness and accuracy for constructability.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.426-429
• /
• 2004

To reconstruct the 3-D information of a irregular object, this paper proposes a new method applying the composition focus measure to time-series image. A focus measure function is carefully selected because a focus measure is apt to be affected by the working environment and the characteristics of an object. The proposed focus measure function combines the variance measure which is robust to noise and the Laplacian measure which, regardless of an object shape, has a good performance in calculating the focus measure. And the time-series image, which considers the object shape, is proposed in order to efficiently applying the interesting window. This method, first, divides the image frame by the window. Second, the composition focus measure function be applied to the windows, and the time-series image is constructed. Finally, the 3-D information of an object is reconstructed from the time-series images considering the object shape. The experimental results have shown that the proposed method is suitable algorithm to 3-D reconstruction of an irregular object.

• 한국의류학회지
• /
• 제45권1호
• /
• pp.94-105
• /
• 2021

This study analyzes the shape change of the breast according to the replica combination method of the lower cup and suggest a pattern construction for the end use purpose. To provide appropriate brassiere patterns to each individual who has various 3D shape characteristics, the ways of layout of 3D replicas were investigated as well as evaluated subjectively and objectively. As for experimental brassieres, basic replicas from the mold cup of long-run brassiere were combined into five different ways to find the appropriate lower brassiere cup pattern. Eighteen women wore experimental brassieres and their breasts were analyzed using the Geomagic Design X program (3D System, Inc., Korea). As result, the pattern that matched the vertexes of the four pieces of the replica and naturally spread the bottom part was best for raising and pushing toward the inside breasts. The fit was good in the case of a pattern in which the convex portions overlapped both sides of the four replica pieces where the vertexes and the bottom part naturally spread apart. The subjects were able to differentiate comfortably fitted brassieres and highly functional brassieres.