• Geophysics and Geophysical Exploration
• /
• v.10 no.1
• /
• pp.37-43
• /
• 2007

The MH21 Research Consortium has conducted a high-resolution 3D seismic survey and a seafloor geochemical survey, to explore methane hydrate reservoirs in the eastern Nankai Trough, offshore Japan. Excellent geological information about shallow formations was obtained from the high-resolution 3D seismic survey, which was designed to image the shallow formations where methane hydrates exist. The information is useful in constructing a geological and geochemical model, and especially to understand the complex geology of seafloor, including geochemical manifestations and the structure of migration conduits for methane gas or methane-bearing fluid. By comparing methane seep sites observed by submersibles with seismic sections, some significant relationships between methane hydrate reservoirs, free gas accumulations below the seafloor, and seafloor manifestations are recognised. Bathymetric charts and seafloor reflection amplitude maps, constructed from seismic reflections from the seafloor, are also useful in understanding the relationships over a vast area. A new geochemical seafloor survey targeted by these maps is required. The relationships between methane hydrate reservoirs and seafloor manifestations are becoming clearer from interpretation of high-resolution 3D seismic data. The MH21 Research Consortium will continue to conduct seafloor geochemical surveys based on the geological and geochemical model constructed from high-resolution 3D seismic data analysis. In this paper, we introduce a basis for exploration of methane hydrate reservoirs in Japan by fusion of 3D seismic exploration and seafloor geochemical surveys.

• Economic and Environmental Geology
• /
• v.47 no.6
• /
• pp.673-681
• /
• 2014

Recently, many countries in the world try to develop alternative energy sources, however, traditional hydrocarbon resources are still occupying most of the energy resources. Exploration demands for high technologies are increasing in the development of limited oil & gas resources field owing to the exhaustion of hydrocarbon resources for access area. Therefore, an effort for the development and the application of new technologies such as azimuth seismic survey, ocean-bottom seismic survey and marine controlled-source electromagnetic survey is necessary as well as an understanding of the existing technologies such as 2D/3D seismic survey. This dissertation is designed with the purpose of introducing marine hydrocarbon exploration technologies and analyzing their internalexternal researches, development and science information. In this study, we analised total 616 dissertations for the marine petroleum exploration released in the Sci-expanded DB of 'web of science' during the 2001~2014 periods.

• Tunnel and Underground Space
• /
• v.18 no.4
• /
• pp.263-271
• /
• 2008

3D seismic tomography technique was assessed for applicability of developed 3D tomography algorithm based on Fresnel volume in the dam-planned area. Reconstructed 3D tomogram based on Fresnel volume and Fast Marching Method(FMM) reveals similar velocity structure to the other geotechnical survey results. With the correlation analysis between RMR data and seismic velocity information, it could provide reliable information of rock mass rate. The applicability of 3D seismic tomography was verified in this study. It would be expected to apply 3D tomography with new developed first arrival calculation and inversion algorithm to the engineering field economically.

• Geophysics and Geophysical Exploration
• /
• v.5 no.3
• /
• pp.145-149
• /
• 2002

The static correction, which is classified into refraction based static correction and reflection based residual static correction, removes distortions caused by irregularities of thickness or velocity in near-surface. Generally, refraction statics is a time consuming process because of high dependence on the interpreter's analysis. Therefore, for huge 3D seismic data, automatic static correction which minimizes the interpreter's analysis is required. In this research, we introduce an efficient method of refraction static correction for land 3D seismic survey.

• Geophysics and Geophysical Exploration
• /
• v.2 no.2
• /
• pp.77-85
• /
• 1999

The 3-D seismic research vessel, Tamhae II, was built to raise up the probability of the hydrocarbon discovery in the Korean continental shelf and the first test survey was completed in the East Sea. During the survey, the 240 channel 2-D marine seismic data were acquired by the Korean flag vessel for the first time. Tamhae II has been equipped with source, receiver, recording equipment, and navigation equipment as well as an onboard processing system. The source is composed of four subarrays and each subarray has six airguns. Total airgun volume is 4578 $in^3$. The receiver consists of two sets of 3 km long 240 channel streamer. In the first survey, the successful acquisition of 2-D seismic data was accomplished. From the result of the data processing, we confirmed that the high quality seismic data were acquired. For the high quality data acquisition, technology of survey design and planning, operation of vessel and equipments and systematic quality control should be developed.

• The Journal of Engineering Geology
• /
• v.24 no.2
• /
• pp.171-178
• /
• 2014

In seismic reflection data processing, the crossdip correction effectively focuses the stacking energy near the sharp bends of a crooked survey line. Additionally, approximate 3-D information on the reflector (e.g., true crossdip angle and lateral continuity) are locally investigated as a by-product of the crossdip correction procedure. Improvement of the signal-to-noise ratio and estimation of reflector crossdip attitude are tested, in terms of both common midpoint bin direction and processing-line type, using synthetic seismic reflection data. To effectively image the reflection energy near bends in seismic survey lines, straight-line binning is preferred to slalom-line binning.

• Geophysics and Geophysical Exploration
• /
• v.25 no.3
• /
• pp.109-119
• /
• 2022

The computational efficiency of reverse time migration (RTM) based on numerical modeling is not secured due to the high-frequency band of several hundred Hz or higher for data acquired through a three-dimensional (3D) ultra-high-resolution (UHR) seismic survey. Therefore, this study develops an RTM program to derive high-quality 3D geological structures using UHR seismic data. In the traditional 3D RTM program, an excitation amplitude technique that stores only the maximum amplitude of the source wavefield and a domain-limiting technique that minimizes the modeling area where the source and receivers are located were used to significantly reduce memory usage and calculation time. The program developed through this study successfully derived a 3D migration image with a horizontal grid size of 1 m for the 3D UHR seismic survey data obtained from the Korea Institute of Geoscience and Mineral Resources in 2019, and geological analysis was conducted.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2009.05a
• /
• pp.73-87
• /
• 2009

Geophysical survey for unconformity-type uranium deposit applied to this study area in Athabaska Basin, Canada were carried out airborne TEM and magnetic, resistivity-induced polarization (DC-IP), puser seismic reflection and well-logging method. The results of airborne survey interpreted the lithological boundary, geological structures, and conductors. Also, these results decided to main targets for ground DC-IP survey. The Low resistivity and the high chargeability slices of 3D modeling interpreted from DC-IP survey response for conductors related to hydrothermal alteration zones and fault-controlled graphitic zones occurring at the unconformity-type uranium deposit, and they confirmed by diamond drilling. Seismic results interpreted to lake bottom surface, alluvium layer and intra-sandstone faults. We suggest the resonable field data acquisition of DC-IP method on the land or the lake in Athabaska Basin.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2007.12a
• /
• pp.53-62
• /
• 2007

Preliminary gas hydrate surveys were carried out From 2000 to 2004 in the East Sea. Research results showed the geophysical evidence of gas hydrate existence. In 2005, Gas Hydrate R&D Organization was established and 10 year gas hydrate development program was initiated. In the $1^{st}$ stage of the program from 2005 to 2007, 6,600 L-km 2-D seismic survey was conducted in the $1^{st}$ year 2005, and $400\;km^2$ 3D survey was conducted in the $2^{nd}$ year 2006. Acquired seismic data were processed and seismic section and 3D cube were produced. By geophysical interpretation and velocity analysis, prospective areas were mapped and candidate drilling sites were recommended. For the precise interpretation, velocity was analyzed using AVO method, and BSR signal was analyzed using deconvolution method. For the prospective area, OBS and high-resolution seismic surveys were conducted. This presentation shows the introduction and examples of the research results of the geophysical methods applied for the gas hydrate exploration in the East Sea.

• Geophysics and Geophysical Exploration
• /
• v.11 no.2
• /
• pp.127-136
• /
• 2008

To identify the potential area of gas hydrate in the Ulleung Basin, 2-D and 3-D seismic surveys using R/V Tamhae II were conducted in 2005 and 2006. Seismic survey equipment consisted of navigation system, recording system, streamer cable and air-gun source. For reliable velocity analysis in a deep sea area where water depths are mostly greater than 1,000 m and the target depth is up to about 500 msec interval below the seafloor, 3-km-long streamer and 1,035 $in^3$ tuned air-gun array were used. During the survey, a suite of quality control operations including source signature analysis, 2-D brute stack, RMS noise analysis and FK analysis were performed. The source signature was calculated to verify its conformity to quality specification and the gun dropout test was carried out to examine signature changes due to a single air gun's failure. From the online quality analysis, we could conclude that the overall data quality was very good even though some seismic data were affected by swell noise, parity error, spike noise and current rip noise. Especially, by checking the result of data quality enhancement using FK filtering and missing trace restoration technique for the 3-D seismic data inevitably contaminated with current rip noises, the acquired data were accepted and the field survey could be conducted continuously. Even in survey areas where the acquired data would be unsuitable for quality specification, the marine seismic survey efficiency could be improved by showing the possibility of noise suppression through onboard data processing.