• Journal of Animal Science and Technology
• /
• v.45 no.3
• /
• pp.343-354
• /
• 2003

Simulation studies were carried out to investigate the responses of selection for three carcass traits (longissimus muscle area: EMA, fat thickness: BF, and marbling score: MS) based on either adjusted phenotypes (APH) or estimated breeding values (EBV) in multivariate animal model with different breeding schemes. Selection responses were estimated and compared on six different models with respect to breeding schemes using either carcass measurements or real time ultrasonic (RTU) scans generated by Monte Carlo computer simulation supporting closed breeding population. From the base population with 100 sires and 2000 dams, 20 sires and 1000 dams by each generation were selected by either APH or EBV for 10 generations. Relative economic weights were equal of three traits as EMA(1): BF(－1) : MS(1) for standardized either APH or EBV. For first two models which were similarly designed with current progeny-test program in Korean cattle, three carcass traits with records either only on male progenies (Model 1) or on male and female progenies (Model 2) were used for selecting breeding stocks. Subsequently, generation intervals on males were assumed as 6${\sim}$10 years in these two models. The other two models were designed with tools of selection by RTU rather than carcass measurements with genetic correlations of 0.81${\sim}$0.97 between RTU and corresponding carcass traits in addition to whether with records (Model 4) or without records (Model 3) on female. In these cases, generation intervals on males were assumed as 2${\sim}$4 years. The remaining last two models were designed as similar with Models 3 and 4 except genetic correlations of 0.63${\sim}$0.68 between RTU and corresponding carcass traits with records (Model 6) and without records (Model 5) on females. The results from 10 replicates on each model and selecting methods suggested that responses indirect selection for carcass traits in Model 4 were 1.66${\sim}$2.44 times efficient rather than those in Model 1. Otherwise, in Model 6 with assuming moderate genetic correlations, those efficiencies were 1.18${\sim}$2.08 times with comparing to responses in Model 1. However, selection response for marbling score was the smallest among three carcass traits because of small variation of measurements. From these results, this study suggested that indirect selection using RTU technology for improving high meat qualities in Korean cattle would be valuable with modifying measuring rules of marbling score forward to large variation or modifying relative economic weight for selection.

• Proceedings of The Korean Society of Health Promotion Conference
• /
• 2004.10a
• /
• pp.1-16
• /
• 2004

This paper considers the possibilities of health promotion from the following perspectives; (1) IUHPE, (2) socio-cultural similarities, (3) action research, and (4) learning from our past. 1. The IUHPE values decentralized activities through regions, and countries such as Japan, Korea, Hong Kong, Taiwan and China belong to NPWP region. Since IUHPE World Conference was held in Japan in 1995, Japan used to occupy more than 60% of NPWP membership. After 2001, membership is increasing rapidly in Chinese speaking sub-region. The transnational collaboration is still in its beginning phase. 2. Confucianism is one of key points. Confucian tradition should not be seen only as obstacles but as advantages to seek a form of health promotion more acceptable in East Asia. 3. Within the new public health framework, people are expected to create and live their health. However, especially in Japan, the tendency of 'lacking of face-to-face explicit interactions' is still common at health-promotion settings as well as academic settings. Therefore, the author tried participatory approaches such as asking WlFY (interactive questions designed for subjects to review their daily life and environment) and as introducing round table interactions. So far, majority of participants welcome new trials. 4. The following social phenomena are comparatively discussed after Japanese invasion and occupation of Korea ended in 1945; ·status of oriental medicine, ·separation of dispensary services, and ·health promotion specialist as a national license. In contrast to Japanese' tendency of maintaining the status quo and postponing of substantial social change, trend toward rapid and dynamic social changes are more commonly observed in Korea. Although all of above possibilities are still in their beginning stages, they are going to offer interesting directions waiting for further challenges and accompanying researches.

• Conservation Science in Museum
• /
• v.27
• /
• pp.147-164
• /
• 2022

Over 200,000 Korean cultural heritage items are currently located abroad. They have made their way to 22 countries under different circumstances and with unique backgrounds. While some of them continue to contribute to promoting Korean culture around the world, others cannot be exhibited due to damage or poor condition. In view of these circumstances, the Overseas Korean Cultural Heritage Foundation (OKCHF) has since 2013 provided museums and art galleries abroad with support for the conservation, restoration, and utilization of the Korean cultural heritage items that they house. As a part of these efforts and on the occasion of the 120th anniversary of the diplomatic relationship between the Republic of Korea and the Kingdom of Belgium in 2021, a gilt-bronze case for acupuncture needles dating to the Goryeo period (918-1392) from the collection of the Royal Museums of Art and History (RMAH), Belgium was brought to Korea for conservation treatment. The primary purpose of this conservation treatment was to restore the original form of the relic and slow to the degree possible the progress of corrosion. The conservation treatment of the gilt-bronze case followed the fundamental order of conservation treatment: removal of corrosive substances, stabilization, and reinforcement. Since this was the first case of restoring metallic cultural properties under the abovementioned support program by the OKCHF, special methodologies distinct from those available in overseas institutions were required. Diverse scientific methods (e.g., X-ray inspection, CT scanning, 3D microscopy) were applied to identify the metalcraft techniques used in the Goryeo period. The analysis found that several designs, including lotus and scrollwork, were exquisitely engraved on the surface of the case by making dots using a round-edged chisel. A bronze plate engraved with designs was rolled into a cylindrical form. The ends were overlapped by 2 to 3 centimeters and then attached to each other by silver soldering. The overlapping ends were welded flat with nearly no gaps. As the final process in the production, the case was lavishly gilt with gold powder using amalgam gilding. The conservation treatment of the gilt-bronze case for acupunctural needles in the RMAH collection restored the original form of the relic and arrested further corrosion. Above all, it revived the historic and academic value of the overseas Korean cultural heritage through scientific analysis.

• The Journal of the Korea Contents Association
• /
• v.9 no.11
• /
• pp.432-442
• /
• 2009

This research had a look at what effect of the pursing benefit has on satisfaction, behavioral intention, and attitude of the visitors to the Gwangju Biennale. The survey was conducted for 320 visitors who finished their exhibition viewing schedule starting September 5 until September 19 [15 days]. 300 questionnaires excepting 20 unfaithfully responded copies among those collected from the surveyed were used for the analysis. As for the statistical disposal of the collected data, after going through the process of Data Coding, this research conducted an frequency analysis using SPSS 12.0 for window & statistics package program AMOS 5.0, an exploratory factor analysis to test the reliability and feasibility of the data, and reliability test of each factor; then, this research tested a hypothesis using structural equation model. The research results are as follows: First, as a result of factor analysis of the 15 pursuing benefits, 4 factors were elicited, such as pursuit of an intellectual experience, pursuit of a novel, exotic experience, pursuit of interpersonal, cultural exchange, and pursuit of internal fullness, etc.; as a result of factor analysis of the 10 attitudes, three factors were elicited, such as affective, cognitive, behavioral factors; as a result of factor analysis of 12 types of satisfaction, two factors, such as satisfaction with facilities and convenience matters, etc. were elicited. Second, as a result of the suitability of research model, suitability, its fidelity came out as $x^2=107.508$, d.f.=48, p=.000, Q=2.240, GFI=.942, AGFI=.906, RMR=.024, NFI=.952, TLI=.963, CFI=.973, RMSEA=.064. Third, pursuing benefit was found out to have a positive effect on satisfaction, attitude, and behavioral intention. Fourth, attitude was found out to have a positive significant effect on satisfaction. Fifth, attitude was found out to have a positive effect on behavioral intention. Sixth, satisfaction was found out to have a positive effect on behavioral intention.

• Journal of Hospice and Palliative Care
• /
• v.13 no.2
• /
• pp.98-108
• /
• 2010

Purpose: The purpose of this study was to identify the relationship between fatigue and quality of life (QOL) of Korean cancer inpatients. Methods: The data were collected from May to August 2007. Study subjects were recruited at D, Y and A university hospitals in Daegu and Kyungpook, Korea. The research instruments utilized in this study were fatigue (FACT-F) and quality of life (FACT-G) in Korean version 4. Data were analyzed with descriptive statistics, t-test, ANOVA, and Pearson correlation using SPSS Win 12.0 program. Results: Fatigue of subjects showed a significant difference according to the type of treatment, change in weight, performance status, exercise, and sleep. The QOL of subjects showed a significant difference according to the purpose of treatment, change in weight, performance status, exercise, and sleep. The mean score of fatigue was 22.48 and the mean score of QOL was 55.52. The fatigue was negatively related to QOL, physical well-being, emotional well-being, and functional well-being. Conclusion: The results suggest the needs for intervention in order to reduce fatigue and to improve QOL of cancer inpatients.

• Journal of radiological science and technology
• /
• v.39 no.1
• /
• pp.1-11
• /
• 2016

The purpose of this study was to provide resources for medical exposure reduction through evaluation of organ dose and image resolution for lumbar spine around according to the size of the collimator in DR system. The size of the collimator were varied from $8^{\prime\prime}{\times}17^{\prime\prime}$ to $14^{\prime\prime}{\times}17^{\prime\prime}$ by 1" in AP and lateral projection for the lumbar spine radiography with RANDO phantom. The organ dose measured for liver, stomach, pancreas, kidney and gonad by the glass dosimeter. The image resolution was analyzed using the Image J program. The organ dose of around lumbar spine were reduced as the size of the collimator is decreased in AP projection. There were no significant changes decreasing rate whenever the size of the collimator were reduced 1" in the gonad. The organ dose showed higher on liver and kidney near the surface in lateral projection. There were decreasing rate of less than 5% in liver and kidney, but decreasing rate was 24.34% in the gonad whenever the size of the collimator were reduced 1". Organ dose difference for internal and external of collimator measured $549.8{\mu}Gy$ in the liver and $264.6{\mu}Gy$ in the stomach. There were no significant changes organ dose difference that measured $1,135.1{\mu}Gy$ in the gonad. Image Quality made no difference because SNR and PSNR were over than 30 dB when the collimator size is less than $9^{\prime\prime}{\times}17^{\prime\prime}$ on AP projection and $10^{\prime\prime}{\times}17^{\prime\prime}$ on lateral projection. Therefore, we are considered that the recommendations criterion for control of collimator were suggested in order to reduce unnecessary X-ray exposure and to obtain good image quality because lumbar spine radiography contains a lot of peripheral organs rather than other area radiography.

• Korean Journal of Food Science and Technology
• /
• v.50 no.1
• /
• pp.98-104
• /
• 2018

Oxyresveratrol (trans-2, 3', 4, 5'-tetrahydroxystilbene), found in many plants including grape, peanut and mulberry, is a phytoalexin, an antimicrobial and antioxidative substance that rapidly accumulates in areas infected by the pathogen. We examined the accumulation of oxyresveratrol in nine Morus alba L. cultivars with respect to storage time and temperature postharvest and infection with GRAS microorganisms. Among the nine cultivars, the Suwon cultivar showed the highest oxyresveratrol content (9.6-fold increase) postharvest, when stored at $30^{\circ}C$ for 7 days. The optimal temperature and postharvest storage time for oxyresveratrol accumulation was $30^{\circ}C$ and 6 days. When Ramulus mori was infected with five microorganisms, the accumulation of oxyresveratrol increased over 4-fold in response to B. coagulans infection. These results suggest that oxyresveratrol accumulation is influenced by storage temperature, storage time, Ramulus mori cultivars, and microbial attack. Therefore, postharvest storage for an appropriate time period at a suitable temperature might be a useful way to industrially produce Ramulus mori cultivars with high oxyresveratrol content.

• Korean Journal of Environmental Agriculture
• /
• v.38 no.4
• /
• pp.225-236
• /
• 2019

BACKGROUND: Hydroponics is one of the methods for evaluating plant production using the inorganic nutrient solutions, which is applied under the artificial light conditions of plant factory system. However, the application of the conventional inorganic nutrients for hydroponics caused several environmental problems: waste from culture mediums and high nitrate concentration in plants. Organic nutrients are generally irrigated as a supplementary fertilizer for plant growth promotion under field or greenhouse conditions. Hydroponic culture using organic nutrients derived from the agricultural by-products such as dumped stems, leaves or immature fruits is rarely considered in plant factory system. Effect of organic or conventional inorganic nutrient solutions on the growth and nutrient absorption pattern of green and red leaf lettuces was investigated in this experiment under fluorescent lamps (FL) and mixture Light-Emitting Diodes (LEDs). METHODS AND RESULTS: Single solution of tomatoes (TJ) and kales (K) deriving from agricultural by-products including leaves or stems and its mixed solution (mixture ration 1:1) with conventional inorganic Yamazaki (Y) were supplied for hydroponics under the plant factory system. The Yamazaki solution was considered as a control. 'Jeockchima' and 'Cheongchima' lettuce seedlings (Lactuca sativa L.) were used as plant materials. The seedlings which developed 2~3 true leaves were grown under the light qualities of FL and mixed LED lights of blue plus red plus white of 1:2:1 mixture in energy ratio for 35 days. Light intensity of the light sources was controlled at 180 μmol/㎡/s on the culture bed. The single and mixture nutrient solutions of organic and/or inorganic components which controlled at 1.5 dS/m EC and 5.8 pH were regularly irrigated by the deep flow technique (DFT) system on the culture gutters. Number of unfolded leaves of the seedlings grown under the single or mixed nutrient solutions were significantly increased compared to the conventional Y treatment. Leaf extension of 'Jeockchima' under the mixture LED radiation condition was not affected by Y and YK or YTJ mixture treatments. SPAD value in 'Jeockchima' leaves exposed by FL under the YK mixture medium was approximately 45 % higher than under conventional Y treatment. Otherwise, the maximum SPAD value in the leaves of 'Cheongchima' seedlings was shown in YK treatment under the mixture LED lights. NO₃-N contents in Y treatment treated with inorganic nutrient at the end of the experiment were up to 75% declined rather than increased over 60 % in the K and TJ organic treatment. CONCLUSION: Growth of the seedlings was affected by the mixture treatments of the organic and inorganic solutions, although similar or lower dry weight was recorded than in the inorganic treatment Y under the plant factory system. Treatment Y containing the highest NO₃-N content among the considered nutrients influenced growth increment of the seedlings comparing to the other nutrients. However effect of the higher NO₃-N content in the seedling growth was different according to the light qualities considered in the experiment as shown in leaf expansion, pigmentation or dry weight promotion under the single or mixed nutrients.

• Korean Journal of Ecology and Environment
• /
• v.44 no.3
• /
• pp.272-279
• /
• 2011

Copper cyanide is a chemical produced in large quantities with 2,500 tonnes being produced in 2006. It is mainly used for electroplating copper, particularly alkali-Cu plate and brass plating. The purpose of this study is to reassess the physicochemical properties and environmental fate of copper cyanide based on reliable data and and to conduct an ecotoxicity test according to the OECD test guidelines as an initial environmental risk assessment (need to state where this was done). Metal containing inorganic substances are not subject to degradation, biodegradation or hydrolysis. Aquatic toxicity tests of copper cyanide were conducted according to OECD test guideline 201, 202 and 203 for green algae, daphnia, and fish, respectively. The following acute toxicity test results were obtained for aquatic species: 0.089 mg $L^{-1}$ (Algae, 72 Hr-$EC_{50}$); 0.21 mg $L^{-1}$ (flea, 48 Hr-$LC_{50}$); 0.62 mg $L^{-1}$ (Fish, 96 Hr-$ErC_{50}$). The chemical possesses properties indicating a hazard for the aquatic environment (acute toxicity in fish, daphnia and algae below 1.0 mg $L^{-1}$). As a result of this study, copper cyanide has become a candidate for detailed risk assessment. Countries that produce this chemical in significant quantities are recommended to perform specific assessments.

• Clinical and Experimental Reproductive Medicine
• /
• v.24 no.3
• /
• pp.311-318
• /
• 1997

Bypassing acrosome reaction and fusion process in intracytoplasmic sperm injection(ICSI), most of injected spermatozoa still contain intact acrosome contents and plasma membrane. It Is not known yet what acrosome contents and plasma membrane of spermatozoa have effect on the development of embryo. For further understanding of fertilization process after ICSI, we studied the time of pronucleus formation, disappearance and first cleavage in human zygote, and pregnancy rate in relation to acrosome reaction rate of spermatozoa after ICSI. Seventy cycles undergoing ICSI program were randomly selected. Sperm suspension from 38 cycles were treated 50% human follicular fluid(hFF) for 3 hours in order to induce acrosome reaction, others were not treated as control. Acrosome reaction in hFF treated and non-treated group was assessed by fluorescein isothiocyanate(FITC)-conjugated Arachis hypogea(PNA) and Pisum sativum agglutinin(PSA). Oocytes were classified into 'good' and 'poor' according to their morphology. After ICSI, fertilization of oocytes were assessed by detection of two pronuclei at 16 hours. The pronuclei disappearance and first cleavage of zygotes were observed at 24 hours, and then embryos were transferred to uterus after culture for 72 hours. The rate of acrosome reaction of spermatozoa in hFF treated group was significantly higher than that in control(p<0.01). Fertilization rates of good oocytes were not different both control and hFF treated group(81.3%(174/206) vs. 72.1%(102/130)). But, in poor oocytes, the fertilization rates in hFF treated group(72.1%(149/183)) were increased compared than those of control group (63.6%(98/140), p<0.01). In either good or poor oocytes, the rates of pronuclei disappearance in hFF treated-spermatozoa injected oocytes were higher than control (59.1%(103/174), 56.4%(84/149) vs. 32.4%(33/102), 37.8%(37/98), p<0.01). Also, the rates of thirst cleavage were increased in hFF treated group (31%(54/174), 24.1%(36/149)) compared than those of control group (10.8%(11/102), 13.2%(13/98), p<0.01). The pregnancy rates of hFF treated group (42.1%(16/38)) were slightly higher than control group (28.1%(9/32), p>0.05). But, the pregnancy rate of group which possessed more than one cleavaged zygote at 24 hours was higher than group which did not (45.2%(19/42) vs. 21.4%(6/28), p<0.05). From these results, the development of zygotes were faster in higher acrosome reacted sperm group than lower acrosome reacted sperm group after ICSI. Our results may be explained that acrosomal membrane and plasma membrane are easily detached from spermatozoa in acrosome reacted spermatozoa compared with acrosome intact sperm in the cytoplasm of oocyte during pronuclear formation. We conclude that the injection of acrosome reacted spermatozoa will increase the pregnancy rate as they can induce fast embryonic development in ICSI.