• Journal of the Korean Society of Radiology
• /
• v.6 no.4
• /
• pp.281-290
• /
• 2012

The difference of radiation dose of MDCT due to different protocols between hospitals was analyzed by CTDI, DLP, the number of Slice and the number of DLP/Slice in 30 cases of the head, the abdomen and the chest that have 10 cases each from MDCT examination of the department of diagnostic imaging of three general hospitals in Gyeongsangbuk-do. The difference of image quality, CTDI, DLP, radiation dose in the eye and radiation dose in thyroid was analyzed after both helical scan and normal scan for head CT were performed because a protocol of head CT is relatively simple and head CT is the most frequent case. Head CT was significantly higher in two-thirds of hospitals compared to A hospital that does not exceed a CTDI diagnostic reference level (IAEA 50mGy, Korea 60mGy) (p<0.001). DLP was higher in one-third of hospitals than a diagnostic reference level of IAEA 1,050mGy.cm and Korea 1,000mGy.cm and two-thirds exceeded the recommendation of Korea and those were significantly higher than A hospital that does not exceed a diagnostic reference level (p<0.001). Abdomen CT showed 119mGy that was higher than a diagnostic reference level of IAEA 25mGy and Korea 20mGy in one-third. DLP in all hospitals was higher that Korea recommendation of 700mGy.cm. Among target hospitals, C hospital showed high radiation dose in all tests because MPR and 3D were of great importance due to low pitch and high Tube Curren. To analyze the difference of radiation dose by scan methods, normal scan and helical scan for head CT of the same patient were performed. In the result, CTDI and DLP of helical CT were higher 63.4% and 93.7% than normal scan (p<0.05, p<0.01). However, normal scan of radiation dose in thyroid was higher 87.26% (p<0.01). Beam of helical CT looked like a bell in the deep part and the marginal part so thyroid was exposed with low radiation dose deviated from central beam. In addition, helical scan used Gantry angle perpendicularly and normal scan used it parallel to the orbitomeatal line. Therefore, radiation dose in thyroid decreased in helical scan. However, a protocol in this study showed higher radiation dose than diagnostic reference level of KFDA. To obey the recommendation of KFDA, low Tube Curren and high pitch were demanded. In this study, the difference of image quality between normal scan and helical scan was not significant. Therefore, a standardized protocol of normal scan was generally used and protective gear for thyroid was needed except a special case. We studied a part of CT cases in the local area. Therefore, the result could not represent the entire cases. However, we confirmed that patient's radiation dose in some cases exceeded the recommendation and the deviation between hospitals was observed. To improve this issue, doctors of diagnostic imaging or technologists of radiology should perform CT by the optimized protocol to decrease a level of CT radiation and also reveal radiation dose for the right to know of patients. However, they had little understanding of the situation. Therefore, the effort of relevant agencies with education program for CT radiation dose, release of radiation dose from CT examination and addition of radiation dose control and open CT contents into evaluation for hospital services and certification, and also the effort of health professionals with the best protocol to realize optimized CT examination.

• Geomechanics and Engineering
• /
• v.23 no.2
• /
• pp.151-163
• /
• 2020

Grouting method is an effective way of reinforcing cracked rock masses and plugging water gushing. Current grouting diffusion models are generally developed for horizontal cracks, which is contradictory to the fact that the crack generally occurs in rock masses with irregular spatial distribution characteristics in real underground environments. To solve this problem, this study selected a cement-sodium silicate slurry (C-S slurry) generally used in engineering as a fast-curing grouting material and regarded the C-S slurry as a Bingham fluid with time-varying viscosity for analysis. Based on the theory of fluid mechanics, and by simultaneously considering the deadweight of slurry and characteristics of non-uniform spatial distribution of viscosity of fast-curing grouts, a theoretical model of slurry diffusion in an oblique crack in rock masses at constant grouting rate was established. Moreover, the viscosity and pressure distribution equations in the slurry diffusion zone were deduced, thus quantifying the relationship between grouting pressure, grouting time, and slurry diffusion distance. On this basis, by using a 3-d finite element program in multi-field coupled software Comsol, the numerical simulation results were compared with theoretical calculation values, further verifying the effectiveness of the theoretical model. In addition, through the analysis of two engineering case studies, the theoretical calculations and measured slurry diffusion radius were compared, to evaluate the application effects of the model in engineering practice. Finally, by using the established theoretical model, the influence of cracking in rock masses on the diffusion characteristics of slurry was analysed. The results demonstrate that the inclination angle of the crack in rock masses and azimuth angle of slurry diffusion affect slurry diffusion characteristics. More attention should be paid to the actual grouting process. The results can provide references for determining grouting parameters of fast-curing grouts in engineering practice.

• Journal of East-West Nursing Research
• /
• v.13 no.2
• /
• pp.138-146
• /
• 2007

Introduction: The purpose of this study was to examine relationships among stroke patients' activities of daily living(ADL), depression, and quality of life(QOL). Methods: Data were collected by questionnaires from 251 stroke patients at 5 hospitals and 2 public health centers in Seoul and Kyonggi-Do. The following Questionnaires were utilized for this study: Functional independence measure(FIM) from Grange, Hamilton, and Sherwin(1986), the Korean CES-D scale from Randloff(1977), and quality of life scale from Bang, Hwal-Lan(1991). Results: Data were analyzed using the pearson correlation, t-test, and ANOVA with SPSS/WIN 12.0. The results of this study were as follow; The subjects consisted of 110 fern ales and 141 m ales. The mean score of activity of daily living was 87.2(range 18-126). Age, family history, comorbidity, paralysis site, and duration after diagnosis were significantly associated with activity of daily living. The mean score of depression was 23.8(range 11-44). Age, gender, education, and job were significantly associated with depression. The mean score of quality of life scale was 3.0(range 1-5). Gender, religion, education, job, economic status, and duration after diagnosis were significantly associated with quality of life. Relationships among activity daily living, depression, and quality of life scale: The activity of daily living had a negative relationship with depression score. The activity of daily living had a positive relationship with QOL score. The depression had a negative relationship with QOL score. Conclusion: Based on these results, it is necessary to run rehabilitation programs to improve stroke patients' ADL, depression. Also, it research for of identifying stroke patients' quality of life according to rehabilitation program.

• Journal of Digital Convergence
• /
• v.13 no.11
• /
• pp.549-559
• /
• 2015

The purpose of this study was to verify whether there are any differences in the level of exercise self-efficacy and perceived health status according to the stage of change for exercise behaviors in older adults. The subjects consisted of 231 older adults (91 male, 140 female) by convenience sampling residing in city D. The collected dates were analyzed using one-way ANOVA, Tukey HSD, and simple regression analysis by SPSS WIN 21.0 program. Moreover, all statistical significance level was set at a=.05. The study results were as follows: Analysis of variance showed that exercise self-efficacy showed significant differences according to the stage of change for exercise behaviors, and as a result of the posthoc analysis, it was found that as the stage became higher, their exercise self-efficacy became higher as well. Perceived health status showed significant differences according to the stage of change for exercise behaviors, and as a result of the posthoc analysis, it was found that as the stage became higher, their perceived health status became higher as well. Analysis of variance showed that exercise self-efficacy and perceived health status were significantly associated with the stages of exercise behavior change. This study identified that exercise self-efficacy and perceived health status were significant variables to explain a possible relationship with exercise stages of older adults. This study provides new information to influence the development of the better health promotion and exercise intervention for older adults in the community.

• Korean Journal of Environment and Ecology
• /
• v.34 no.5
• /
• pp.466-482
• /
• 2020

This study used 3D computational fluid dynamics (CFD) in the ENVI-met program to investigate how particulate matters (PM) generated on roads disperse through adjacent urban neighborhoods according to the urban development pattern. An urban area centered on a six-lane road in the vicinity of Miryang City Hall in Gyeongnam Province was selected to simulate the effect of the green space and building height on the PM concentration. The ENVI-met model considered the presence of green space and different building heights (high/low) on both sides of the road to examine the dispersion of PM. The result showed that the area of high-rise buildings and green space had the lowest PM concentration dispersed to the adjacent area, followed by the area of high-rise buildings and no green space. In contrast, the PM concentration remained relatively high for low-rise buildings, regardless of the green space. The reason for the low PM concentration in the area with high-rise buildings was a strong building wind, which caused PM to disperse to the outside, lowering the PM concentration quickly. These results indicate that the PM can disperse faster, and the PM concentration remains low in the urban neighborhood. On the other hand, green space had no significant effect on reducing PM in the urban neighborhood. In particular, when there are low-rise buildings on both sides of the road, the green space has no effect on the PM concentration in the urban neighborhood. Since this study considered only the case of PM emitted from the road, future studies should investigate other factors to figure out the dispersion model of PM and conduct on-site experiments.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.2
• /
• pp.183-190
• /
• 2015

Objective : Walking with a Material handling is an activity frequently undertaken by agricultural workers in Korea, due to the nature of their work. This study aimed to investigate differences in biomechanical variables according to the mechanical alignment of the lower limbs when walking with a heavy load, and to use this as basic data in the design of various working environments to reduce the skeletomuscular burden on the knee joint. Method : The study subjects comprised of 22 right-foot dominant adult men and women aged between 20 and 23 years. The subjects were divided into a varus or valgus group according to the mechanical alignment of the lower limb by using radiographic findings. The subjects walked without any load and with a load of 10%, 20%, or 30% of their body weight held in front of them. The Kwon3d XP program was used to calculate biomechanical variables. Results : The flexion/extension moment of the knee joint showed a decreasing trend with increased load, irrespective of the mechanical alignment of the lower limb, while the varus group did not show normal compensatory action when supported by one leg at the point of maximum vertical ground reaction force. In addition, in terms of the time taken, subjects showed no difficulties in one-foot support time up to 20%/BW, but at 30%/BW, despite individual differences, there was an increase in single limb. The increased load resulted in a decrease in the ratio of standing phase to ensure physical stability. The valgus group showed a trend of increasing the stability of their center of mass with increasing load, through higher braking power in the early standing phase. Conclusion : In conclusion, although there was no statistical difference in biomechanical variables according to the mechanical alignment of the lower limbs, the varus group showed a more irregular walking pattern with a Material handling than the valgus group, partially proving the association between lower limb alignment and walking with a Material handling.

• The Journal of the Korean dental association
• /
• v.47 no.10
• /
• pp.669-676
• /
• 2009

Purpose : Anterior region is crucial area for esthetic implant restoration. However, the alveolar process undergoes atrophy after removal of teeth and creates unfavorable situation for implant installation. The knowledge of the thickness of alveolar bone is required to estimate and expect the bone resorption after extraction. The aim of this study is to measure facial, palatal and faciopalatal bone thickness on maxillary anterior teeth. Methods : Facial, palatal, and faciopalatal bone thickness were measured on the computed tomography (CT) images from 57 patients, using an image analyzer program (Ondemand$3D^{(R)}$, Cybermed, Seoul, Korea). Results : The thickness of facial bone in incisors, lateral incisors and canines were less than 1 mm. The thickness of facial bone increased from anterior to posterior region and the thickness of palatal bone increased from posterior to anterior region. Conclusion : The measurement can be used for planning implant surgery before extraction. CT has are clinically useful in the evaluation of thickness of alveolar bone.

• Journal of Fashion Business
• /
• v.10 no.5
• /
• pp.58-73
• /
• 2006

The purpose of this study was to improve of fittness and coverage rate of exporting domestic clothing to China for Chinese Adult Female. For study, It was measured 1381 female women aged between 19 and 50 who resident in Beijing and Shanghai in China. as a sample, 1360 female women was seleted for development of apparel sizing system. As for the method of this study was made of 111 items by indirect measures done during Jun. 23 $\sim$ Aug. 7, 2004. Data analysis were processed by SPSS WIN 10.0 Program was used to for technical statistical analysis, correlation analysis, factor analysis, ANOVA(t-test and F-test), duncan's multiple test. The result was as follows: Chinese Adult women's constitutional components determined by factor analysis, six components could be identified: factor 1:constitutional obesty and width size, factor 2: longistudinal body size, factor 3: shoulder form and size, factor 4: longistudinal upper body size, factor 5: under body size, factor 6: shoulder dropping. According to the Women's Wear Specifications(GB/T 1335.2-1997) by drop, body types of Chinese Adult female was classified into six types, it was Y, A, B, C and Z, D. In order, A type as standard somatotype(49.8%), B type(26.9%), Y type (18.8%), C type(2.9%). Y type had the average height and shoulder, bust girth. They were slimmer in overall terms. A type had a normal obesity and body size in height, shoulder, bust girth. They were average Chinese Women. B type had a smaller then A type. They were more obes and thick waist girth. C type had the highest obesity, the widest shoulder and bust girth, and thick waist girth. The characteristics of each body type following the body type structure factor are Y-type for slender type, A-type for standard type, B-type for slightly large type, and C-type for obese type. For each region, the Beijing area had in the order of A-type, Y-type, B-type and C-type, and the Shanghai area had in the order of A-type, B-type, Y-type and C-type.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.11
• /
• pp.1427-1435
• /
• 2010

The present study was conducted to examine the effect of a stair-stepped feed intake pattern on growth, feed efficiency, and meat quality of Hanwoo steers. Twenty-seven 11-month-old Hanwoo steers were randomly divided into three groups. The control group was fed according to the Korean steer feeding program, and the other two groups were fed according to an alternated feeding schedule of 3-2-4-2 months. During the first three months of the experiment, treatment group 1 (T1) and treatment group 2 (T2) were fed 20% and 30% less than the control group, respectively. For the following two months, the T1 group was fed 20% more than the control group while the T2 group was fed 20% less than the control group. In the third step, T1 and T2 groups were fed 20% and 10% less, respectively, than the control group for four months. In the last two months, T1 and T2 groups were fed 20% more than the control group. After the stair-step feeding trial, steers were fed concentrated feed ad libitum for five months. The altered feed intake pattern did not affect daily body weight gain. However, daily feed intake tended to decrease and growth efficiency tended to increase in the two treatment groups compared to the control group. Altered feed intake also affected blood metabolite levels. The serum glucose and BUN level of the T1 group increased in the first re-fed period compared to the T2 and control groups. The serum cholesterol level of the T2 group decreased in the first restricted-re-fed growth period compared to the T1 and control groups. The serum NEFA levels of the two treatment groups increased from the first restricted period compared to the controls. The serum insulin level of the T2 group increased in the last period compared to the T1 and control groups. Regarding meat yield index, the control group was significantly higher than the T2 group (p<0.05). Regarding meat yield grade, the carcass back fat thickness of the T2 group was significantly higher than the control group (p<0.05). In marbling score, the T1 group was the highest (4.9), followed by the control group (4.1) and the T2 group (4.0). These results indicate that using a stair-stepped growth pattern (T1) can contribute to improvements in growth efficiency and muscle marbling.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.11
• /
• pp.361-367
• /
• 2019

This exploratory study investigated the real time adaptability of industry training for college professors. For this study, the researcher whose college's professor in the department of early childhood education used collaborative action research. This research was conducted in a class of five year old children of a daycare center in D city. The researcher and the homeroom teacher interacted with each other through 4 steps during the researcher's training period. The first step was group formation between the researcher and the teacher. The second step was problem identification. The third step was a review of the literature. The forth step was problem-solving. The researcher and teacher finally developed a rhythm movement program that was based on fundamental motor performance of young children. Through this collaborative effort, the researcher and teacher had the opportunity to improve their professionalism. Especially, the researcher improved her understanding and knowledge of teaching young kids. The result of this study is meaningful in that it provided basic data to improve training of college professors.