• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.6
• /
• pp.603-611
• /
• 2016

Research and development of mineral-resource-related products has progressed with the increased need to develop mineral resources. The DTH hammer is a resultant product. However, owing to particular work conditions of underground drilling, it is difficult to obtain direct data on the DTH hammer. A DTH drill rig requires a significant amount of money and time for actual testing. This thesis aimed to resolve this problem by using CAE. In a previous paper, the structure of the DTH hammer and its movement were analyzed, and a standard model based on simulation was proposed. Then, experimentation and comparison verification were conducted. In this paper, by using an experimental design method, we derived a control factor of the impact force and efficiency of the DTH hammer and attempted to optimize the design. As a result, the impact energy increased by 14.9%, and the efficiency increased by 3.3%.

• Archives of design research
• /
• v.13 no.1
• /
• pp.209-218
• /
• 2000

The purpose of this study was to improve the curriculum for industrial design department in the junior colleges. In order to achieve the purpose, two methodologies were carried out. First is job analysis of the industrial designers who have worked in the small & medium manufacturing companies, second is survey for the opinions of professors in the junior colleges. Some results were as follows: 1. The period of junior college for industrial designers is 2 years according to present. But selectively 1 year of advanced course can be established. 2. The practice subjects same as computational formative techniques needed to product development have to be increased. In addition kinds of selection subjects same as foreign language, manufacturing process, new product information and consumer behavior investigation have to be extended. 3. The next subjects need to adjust the title, contents and hours. (1) The need of 3.D related subjects same as computer modeling, computer rendering, 3.D modeling was high. The use of computer is required to design presentation subjects. (2)The need of advertising and sale related subjects same as printing, merchandise, package, typography, photography was low, the need of presentation techniques of new product development was high. (3) The need of field practice, special lecture on practice and reading original texts related subjects was same as at present, but these are not attached importance to form. As the designers feel keenly the necessity of using foreign language, the need of language subject was high.

• Journal of Biosystems Engineering
• /
• v.38 no.4
• /
• pp.248-254
• /
• 2013

Purpose: This study was performed in order to obtain basic data for policy development and R&D to sharpen competitiveness in domestic agricultural machinery industry by analyzing the recent status of demand and supply for tractor, rice transplanter(riding type), and combine. Methods: Basic data from 199,275 units of tractor, rice transplanter (riding type), and combine was offered by the National Agricultural Cooperative Federation and Korea Agricultural Machinery Industry Cooperative. Those agricultural machines were supplied by the government's loan support from 2003 to 2012. Results: Recent supply of tractor is only 13,000 units or so per annum, thereby being stagnated. Rice transplanter and combine in 2012 corresponded to 3,810 units and 2,490 units, respectively. The domestic market share of the imported agricultural machinery accounted for 60.0% in tractor, 99.5% in saddle rice transplanter, and 80.9% in combine, thereby having been sharply increased 33.1%p, 42.0%p and 53.6%p compared to the ones in 2003. Life spans of tractor, combine and saddle rice transplanter are 3.7, 3.7 and 4.2 years, respectively. Among the discontinued models, the one less than 300 units supplied was occupied up to 70~85%. Conclusions: The domestic demand and the export expansion are needed through developing a model of agricultural machinery of having competitiveness to domestically activate agricultural machinery industry.

• Journal of KIISE:Software and Applications
• /
• v.33 no.9
• /
• pp.751-775
• /
• 2006

In this paper, we suggested an avatar control technique using the high-level behavior. We separated behaviors into three levels according to level of abstraction and defined layered scripts. Layered scripts provide the user with the control over the avatar behaviors at the abstract level and the reusability of scripts. As the 3D environment gets complicated, the number of required avatar behaviors increases accordingly and thus controlling the avatar-object behaviors gets even more challenging. To solve this problem, we embed avatar behaviors into each environment object, which informs how the avatar can interact with the object. Even with a large number of environment objects, our system can manage avatar-object interactions in an object-oriented manner Finally, we suggest an easy-to-use user interface technique that allows the user to control avatars based on context menus. Using the avatar behavior information that is embedded into the object, the system can analyze the object state and filter the behaviors. As a result, context menu shows the behaviors that the avatar can do. In this paper, we made the virtual presentation environment and applied our model to the system. In this paper, we suggested the technique that we controling an the avatar control technique using the high-level behavior. We separated behaviors into three levels byaccording to level of abstract levelion and defined multi-levellayered script. Multi-leveILayered script offers that the user can control avatar behavior at the abstract level and reuses script easily. We suggested object models for avatar-object interaction. Because, TtThe 3D environment is getting more complicated very quickly, so that the numberss of avatar behaviors are getting more variableincreased. Therefore, controlling avatar-object behavior is getting complex and difficultWe need tough processing for handling avatar-object interaction. To solve this problem, we suggested object models that embedded avatar behaviors into object for avatar-object interaction. insert embedded ail avatar behaviors into object. Even though the numbers of objects areis large bigger, it can manage avatar-object interactions by very efficientlyobject-oriented manner. Finally Wewe suggested context menu for ease ordering. User can control avatar throughusing not avatar but the object-oriented interfaces. To do this, Oobject model is suggested by analyzeing object state and filtering the behavior, behavior and context menu shows the behaviors that avatar can do. The user doesn't care about the object or avatar state through the related object.

• Korean Journal of Food Science and Technology
• /
• v.35 no.5
• /
• pp.914-917
• /
• 2003

This study was undertaken to find the optimum condition for the Maillard browning reaction of tagatose and glycine model solution by applying the response surface methodology. Independent variables were pH (3, 5, 7), temperature (70, 85, $100^{\circ}C$), and time (60, 180, 300 min), while the dependent variables were absorbance, yellowness, color difference, and organoleptic score. The quadratic models with the cross-product proved to be suitable, due to the high coefficients of determination and the lack of fit results. Since all the dependent variables had saddle points, the optimal points were determined through ridge analysis. For absorbance, yellowness, and color difference, the optimal points were the lowest values; in contrast, the optimal point of organoleptic score was the highest value.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.4
• /
• pp.497-504
• /
• 2008

This study was conducted for the optimization of ingredients in salad dressing using Bokbunja (Rubus coreanum Miquel) juice. The experiment was designed according to the D-optimal design of mixture design, which included 14 experimental points with 4 replicates for three independent variables (Bokbunja juice $15.70\sim47.10%$, oil $23.50\sim39.20%$, vinegar $3.90\sim19.60%$). The compositional and functional properties of the prepared products were measured, and these values were applied to the mathematical models. A canonical form and trace plot showed the influence of each variable on the quality attribute of final mixture product. By the use of F-test, viscosity, color values (L, a, and b), emulsion stability and sensory characteristics (color) were expressed by a linear model, while the color values (L) and sensory characteristics (smell, taste, and overall acceptance) were by a quadratic model. The optimum formulations by numerical and graphical method were analogous: Bokbunja juice, oil and vinegar of 36.02%, 26.48%, and 12.00% by numerical method, respectively; those of 36.00%, 26.44%, and 12.06% by graphical method, respectively.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.10
• /
• pp.11-17
• /
• 2022

In this paper, a model that can increase the efficiency of work in arranging interior furniture by applying augmented reality technology was studied. In the existing system to which augmented reality is currently applied, there is a problem in that information is limitedly provided depending on the size and nature of the company's product when outputting the image of furniture. To solve this problem, this paper presents an AR labeling algorithm. The AR labeling algorithm extracts feature points from the captured images and builds a database including indoor location information. A method of detecting and learning the location data of furniture in an indoor space was adopted using the CNN technique. Through the learned result, it is confirmed that the error between the indoor location and the location shown by learning can be significantly reduced. In addition, a study was conducted to allow users to easily place desired furniture through augmented reality by receiving detailed information about furniture along with accurate image extraction of furniture. As a result of the study, the accuracy and loss rate of the model were found to be 99% and 0.026, indicating the significance of this study by securing reliability. The results of this study are expected to satisfy consumers' satisfaction and purchase desires by accurately arranging desired furniture indoors through the design and implementation of AR labels.

• Korean small business review
• /
• v.41 no.3
• /
• pp.49-75
• /
• 2019

Market instability offers opportunities as well as the need for careful innovation strategies and learning for a company's survival. Companies that find new opportunities decide to carry out innovation and decide on the size of their investments by considering their position in the market they are aiming for and the intensity of competition. This study was conducted to check whether obstacles to innovation face by SMEs in the manufacturing sector vary depending on the stage of corporate growth and to identify the impact of the government support system on the decision-making process on the performance of innovation. According to the analysis, there were differences in obstacles to innovation depending on the stage of corporate growth. It was found that more innovative SMEs are, more obstacles they face, and to overcome such obstacles, they try to access government support systems more. In addition, the use of a government support system eliminated obstacles to innovation, and the positive and significant effects of investing in innovation were identified. This study is meaningful in that it explicitly approached these hypotheses by applying a multistage model to the process of innovation carried out by SMEs in the manufacturing sector.

• Geomechanics and Engineering
• /
• v.12 no.3
• /
• pp.523-539
• /
• 2017

Clay soils are typical for their swelling properties upon absorption of water during rains and development of cracks during summer time owing to the profile desorption of water through the inter-connected soil pores by water vapour diffusion leading to evaporation. This type of unstable soil phenomenon by and large poses a serious threat to the strength and stability of structures when rest on such type of soils. Even as lime and cement are extensively used for stabilization of clay soils it has become imperative to find relatively cheaper alternative materials to bring out the desired properties within the clay soil domain. In the present era of catastrophic environmental degradation as a side effect to modernized manufacturing processes, industrialization and urbanization the creative idea would be treating the waste products in a beneficial way for reuse and recycling. Bottom ash and ecosand are construed as a waste product from cement industry. An optimal combination of bottom ash-eco sand can be thought of as a viable alternative to stabilize the clay soils by means of an effective dispersion dynamics associated with the inter connected network of pore spaces. A CATIA model was created and imported to ANSYS Fluent to study the dispersion dynamics. Ion migration from the bottom ash-ecosand pile was facilitated through natural formation of cracks in clay soil subjected to atmospheric conditions. Treated samples collected at different curing days from inner and outer zones at different depths were tested for, plasticity index, Unconfined Compressive Strength (UCS), free swell index, water content, Cation Exchange Capacity (CEC), pH and ion concentration to show the effectiveness of the method in improving the clay soil.

• Natural Product Sciences
• /
• v.13 no.2
• /
• pp.152-159
• /
• 2007

To demonstrate anti-hyperlipidemic activity of the 19${\alpha}$-hydroxyursane-type triterpenoid (19${\alpha}$-HUT)-rich fraction, this fraction was prepared from the extract of Rubus crataegifolius leaves. This fraction was found to have anti-hyperlipidemic effect in a high fat diet-induced rat model from the observation of reduction of abdominal fat pad weights, atherogenic index and hypercholesterolemia at 30 and 60 mg/kg (p.o.) The 19${\alpha}$-HUT fraction was subjected to SiO$_2$, ODS, and/or Sephadex LH-20 column chromatography to yield a new triterpenoid (1) called pomolic acid ester along with nine known triterpenoids which are all 19${\alpha}$-HUTs: euscaphic acid (2), tormentic acid (3), 23-hydroxytormentic acid (4), kaji-ichigoside F$_1$ (5), rosamultin (6), niga-ichigosides F$_1$ (7) and F$_2$ (8), suavissimoside F$_1$ (9) and coreanoside F$_1$ (10). The structure of compound 1 was established as 28-O-formyl-3,19-dihydroxyurs-12-en-28-oic acid on the basis of 2D-NMR spectroscopic data and mass spectrum. Compound 1 was isolated for the first time from natural sources.