• 한국운동역학회지
• /
• 제17권2호
• /
• pp.113-121
• /
• 2007

The purpose of this study was to determine the effect of three different plates($0^{\circ}$, $10^{\circ$}, $20^{\circ}$)under heels on the lower limb muscles and erector spinae during squat exercise. Ten high school korean traditional wrestling players(age: $18.5{\pm}0.7$, weight: $1972.2{\pm}128.5N$, height: $177.8{\pm}6.0cm$, weight of barbell: $1004.5{\pm}132.4N$) performed squat exercise using three different tilting plates under heels at a cadence of 40beats/sec with 80% one repetition maximum load. Surface electrodes were placed on the participants' left and right erector spinae, and rectus femoris, vastus medialis, vastus lateralis, tibialis anterior, biceps femoris, medial gastrocnemius, and lateral gastrocnemius in the right lower extremity. One S-VHS camcorder(Panasonic AG456, 60fields/s) was placed 10m to the side of the participant. To synchronize the video and EMG data, a synchronization unit was used for this study. Average and Peak IEMG values were determined for each participant. For each variable, a one-way analysis of variance was used to determine whether there were significant differences among three different tilting plates under heels. When a significant difference was found in plates type, post hoc analyses were performed using the Tukey procedure. A confidence level of p<.05 was used to determine statistical significance. As a result of this study, maximum nEMG values of the tibialis anterior in $0^{\circ}$ plates was significantly higher than the corresponding values for the other plates during the knee extension. This increased activation in the tibialis anterior muscle indicates an increase in displacement of center of gravity of body. It is very likely that additional muscle activation are needed to stop the forward and backward movement. The results also showed that muscular activities of quadriceps femoris and erector spinae were decreased with increasing angle of plates. This suggests that increasing angle of plate may help to sustain the balance and posture of squat exercise. It is considered that very few significant differences were found among three different plates($0^{\circ}$, $10^{\circ}$, $20^{\circ}$) since elite players with much experience in squat exercise, were chosen as a participant of this study. In order to obtain meaningful results regarding the tilting angle of heel plates in squat exercise, kinetic and 3D kinematic analysis will be needed in the future study.

• 한국농촌생활과학회지
• /
• 제8권1호
• /
• pp.7-13
• /
• 1997

In this study we examined the greenhouse worker's work load to test the efficiency of the developed vehicles (hand operated vehicle (HV), simple battery-powered autonomous vehicle (AV)). The subject of this study were healthy adult females who had experience in growing crops. We measured workers' heart rate, blood Pressure. rectal temperature, mean skin temperature, oxygen consumption and blood lactate level as a physiological index of work load. The results of this study are as follows : The test group using experimental vehicle showed the lower heart rate (mean$\pm$S.D. for HV, AV respectively 74$\pm$5, 75$\pm$3 beats/min, p＜0.01) than the control group (84$\pm$8beat/min) not using experimental vehicle and the lower systolic blood Pressure (HV, AV respectively 109$\pm$8, 109$\pm$9 mmHg, p＜0.01) than the control group (121$\pm$11 mmHg), and lower rectal temperature(HV, AV respectively 37.0$\pm$0.1, 36.8$\pm$0.2$^{\circ}C$, p＜0.01) than the control group (37.0$\pm$0.2$^{\circ}C$), and the less oxygen consumption (HV, AV respectively 2.13$\pm$0.09, 1.66$\pm$0.52$m\ell$/kg/min, p＜0.01) than the control group(2.43$\pm$0.12$m\ell$/kg/min), and the lower blood lactate level (HV, AV respectively 2.03$\pm$1.00, 1.66$\pm$0.52mmol, p＜0.01) than the control group (2.43$\pm$0.12mmol). Judging from these results, these experimental vehicles for greenhouse workers can be confirmed as a useful tool. It is suggested that these vehicles would alleviate the peasant's syndrome including muscle fatigue and musculoskeletal disease usually caused by working in an uncomfortable posture.

• 한국운동역학회지
• /
• 제14권2호
• /
• pp.69-83
• /
• 2004

The purpose of this study is searching for technical merits and demerits of each weight lifting player through qualitative motion analysis system. Moreover, It is also analysis the repeating the establishment of exercise purpose and studying for the effect of the field adaptation. The subject of this study was five male weight lifting players who have been engaged in Korean Delegation Team. The institution of exercise target was made through two times qualitative analysis and the result of studying for the effect of the field adaptation was produced before offering feedback. Moreover, two time analysis added after offering feedback. All analysis was based on 2-D visual analysis. The results of this study are as follows: 1. Maximal barbell moving speed in starting phase was decreased after offering feedback. This result implies advancement of technical skills after offering feedback. 2. From starting posture to 앉아받기, forward and backward moving distance of hip joint was decreased after offering feedback in all subjects. This result represents advancement of technical skills after offering feedback. 3. In terms of pull phase, forward and backward moving distance of hip and shoulder joint was decreased after offering feedback in all subjects. This result represents advancement of technical skills after offering feedback. 4. In terms of pull phase, the difference of horizontal value of coordinates was decreased after offering feedback in all subjects. This result represents advancement of technical skills after offering feedback. 5. In terms of pull phase, the motion range of hip joint was decreased after offering feedback in three of five subjects and this represents advancement of technical skills after offering feedback. However, the rest of them were not variable or narrow decreasing. This result represents that feedback system could not brought tremendous effects. 6. From apex point of barbell to 앉아받기, the difference of barbell height was decreased after offering feedback in three of five subjects and this represents advancement of technical skills after offering feedback. However, the rest of them weren't variable or narrow increasing. This result represents that feedback system could not brought tremendous effects. 7. In terms of last-pull phase, the angular velocity of knee joint was increased after offering feedback in four of five subjects and this represents advancement of technical skills after offering feedback. However, the rest of them, only one subject, decreased. This result represents that feedback system could not brought tremendous effects. 8. In terms of last-pull, the conversional tendency of maximal extension to flextion came out all but simultaneously without offering feedback in four of five subjects. This is well-performed technique. Only one subject, however, could not use power effectively because the fact that his maximal extension came out in serial, from ankle to knee and waist means dispersion of power. In addition to, after offering feedback, only one subject made increasing the maximal extension of knee in last-pull and this result represents advancement of skills after offering feedback. However, the rest of them could not make meaningful development after offering feedback. 9. It might be assumed that searching for technical merits and demerits of each weight lifting player through qualitative motion analysis system could improve player's skill.

• Journal of Preventive Medicine and Public Health
• /
• 제26권1호
• /
• pp.20-36
• /
• 1993

Work-related low back pain is one of the major factors that cause the loss of working power especially in actively working age, therefore controlling the work-related low back pain is one of the major issues in the field of industrial safety and health. This study was performed for detecting the risk factors and proposing the efficient control program of the work-related low back pain. The subjects were male workers employed at the manufacturing industry in Pusan with longer than 6 months' working duration. The data was collected by self-reported questionnaire and interview from May 1 to October 31,1992. The contents of questionnaire were as follows:. the experience of low back pain within the recent one month, general characteristics(age, marital status, education level, religion, regular exercise), physical characteristics(height, weight), employment status(working duration, daily working hours, rest during work, satis(action fur the job), type of work and working environments(posture, forward bending, lifting and movement, satisfaction for table and chair). The result was analyzed for 608 entire respondents by case-control comparative method. The number of cases was 152 with a history of work-related low back pain, so the relative frequency of self-reported work-related low back pain was 25.0%, and the number of controls was 344 without any history of low back pain. As a result, two characteristics of the employment status(working duration, satisfaction fur the job) and all characteristics of type of work and working environments showed a statistical significance between the case and control groups(p<0.01). The Oddb ratios of these variables for Work-related low back pain were calculated. They were 7.88 for the satisfaction fur chair, 7.86 for lifting and movement,3.31 for satisfaction for table, and 2.22 fur bending forward(p<0.01). And for the multivariate logistic regression analysis confirmed that unsatisfaction for table was independent risk factor for Work-related low back pain. In summary, though this study was based upon the self-reported questionnaire and the subjective complaints, the satisfaction for chair, lifting and movement, satisfaction for table, and bending forward concerned with the type of work and working environments were considered as the main factors causing the work-related low back pain, and the work-related low back pain may be preventable by the ergonomic control of these factors.

• 시큐리티연구
• /
• 제22호
• /
• pp.37-64
• /
• 2010

9.11테러사건 이후 테러는 다양한 동기를 가지고 목표달성을 위해 국가중요시설과 같은 경성표적에서 연성표적인 지하철, 백화점, 관광호텔 등 다중이용시설에 대한 테러공격이 급증하고 있으며, 또한 불특정 다수의 일반인들을 대상으로 무차별적인 동시다발 테러양상을 보이고 있다. 2010년 11월 서울에서 주요 20개국(G20) 정상회의와 국제기구 등 40여개 국가가 참여하는 국제회의가 개최되며, 금년 7월에 아프간 350명 이내의 치안지원군 추가파병을 앞두고 국제테러조직들이 예민한 반응을 보이고 있다. 한국은 지난 APEC, ASEM, 2002 한 일 월드컵 등의 국제행사를 성공적으로 개최하였던 경험을 토대로 다음과 같이 다중이용시설의 테러 안전대책 방안을 강구하여야 한다. 첫째, 다자간 국제회의 안전 활동의 효율성 제고와 테러방지법의 조기입법, 부총리급의 대테러센터의 장 직위를 신설해야 한다. 둘째, 다중이용시설의 테러위기관리시스템 정립과 안전대책이 강구되어야 한다. 셋째, 다중이용시설의 테러예방을 위해 근본적인 건축적 대처방안과 신종 IED위협에 대한 범정부차원에서의 대책을 강구해야 한다. 넷째, 테러현장에서의 경찰과 소방기관의 초기대응태세 확립 및 사경비회사의 근무체제 확립을 위한 특수교육이 필요하다. 다섯째, 대국민 테러위협의 인식변화와 홍보 교육시스템이 개발되어야 하며, 테러의 사전예방활동을 위한 테러위해 인지능력배양을 위한 연구가 필요하다. 여섯째, 다중이용시설물 이용객의 안전관리를 위해 3D SICS와 같은 과학적인 장비를 개발하여 운영할 필요가 있다. 이와 같은 요소를 보강하여 테러를 사전에 예방할 수 있도록 모든 수단과 방법을 총동원해야 할 때라고 보여 진다.

• 한국운동역학회지
• /
• 제15권2호
• /
• pp.11-20
• /
• 2005

This study has a purpose on contributing to apprehend safe and right way to stop to the inline skate beginners and to the instructors who teaches line skating on the basis for the result of the kinematical analysis on Heel brake stop movement of the inline skate, focusing on the displacement on COG, angle displacement of ankle joint, angle displacement of knee joint, angle displacement of hip joint, using a 3D image method by DLT. To achieve this goal, we analysed the kinematical factor of the 3 well-trained inline skating instructors and obtained the following results. 1. During the movement of heel-brake stop, when strong power was given to a stable and balanced stop and the lower limbs, if the physical centroid is lowered the stability increases, and if it is placed high from the base surface, as the stability decreases compared to the case of low physical centroid, we should make a stop by placing a physical centroid in the base surface and lowering the hight of physical centroid. 2. To make a stable and balanced stop and to provide a strong power to the lower limbs, it is advisable to make a stop by decreasing an angle displacement of ankle joint during a "down" movement. In case of the left ankle joint, in all events and phases the dorsiflexion angle showed a decrease. Nevertheless, in the case of the right ankle joint, the dorsiflexion angle shows an increase after a slight decrease. The dorsiflexion angle displacement of ankle joint can be diminished because of the brake pad of the rear axis frame of the right side inline skate by raising a toe, but cannot be more decreased if certain degree of an angle is made by a brake pad touching a ground surface. To provide a power to a brake pad, it is recommended to place a power by lowering a posture making the dorsiflexion angle of the left ankle joint relatively smaller than that of the right ankle. 3. To make a stable and balanced stop and to add a power to a brake pad, the power must be given to the lower limbs in lowering the hight of physical centroid. For this, it is recommended to make a down movement by decreasing the flexion angle of a knee joint and it is necessary to make a down movement by a regular decrease of the angle displacement of knee joint rather than a swift down movement in every event and phase. 4. The right angle displacement of hip joint is made by lowering vertically the hight of physical centroid as leaning slightly forward. If too narrow angle displacement of hip joint is made by leaning forward too much, the balance is lost during the stop by placing the center in front. To make a stable and balance stop and to place a strong power to the lower limbs, it is recommendable to make a narrow angle by lower the hip joint angle. However, excessive leaning of the upper body to make the angle too narrow, can cause an instable stop and loss of physical centroid. After this study, it is considered to assist the kinematical understanding during the heel brake stop movement of the inline skate, and, to present basic data in learning a method of stable and balanced stop for the inline skating beginners or for the inline skate instructors in the present situation of the complete absence of the study in inline skating.

• 대한방사선치료학회지
• /
• 제23권1호
• /
• pp.1-6
• /
• 2011

목 적: 정위적체부방사선치료(Stereotactic body radiotherapy) 시 환자셋업의 재현성 및 장시간 안정된 자세의 유지를 위한 고정용구는 정확한 치료를 위해 무엇보다 중요하다. 이에 본 연구는 상품화된 고정용구 두 가지와 자체 제작한 고정용구를 비교 평가하여 정위적체부방사선치료 시 최적의 고정용구를 적용하는데 그 목적이 있다. 대상 및 방법: 일반인 5명을 대상으로 각기 다른 세 가지 고정용구(A: Wing-board, B: BodyFix system, C: Arm up holder with vac-lock)를 각각 적용하였으며 대상자의 가장 안정적인 호흡주기를 선택하여, 고글 모니터를 착용 후 일정한 호흡을 30분간 유지토록 하여 호흡신호를 획득하였다. 호흡신호의 분석은 본원에서 자체 개발한 프로그램을 통해 호흡신호의 최고값(peak value)과 최저값(valley value)의 표준편차(standard deviation) 및 분산값(variation value)을 시간대별로 분리하여 획득하고 이를 이용해서 상대적 비교지수를 구하여 각 고정 용구를 비교평가 하였다. 결 과: 각 고정용구의 호흡시간대별 편차의 변화를 고려한 안정도를 평가하였으며, 고정 용구 별 비교지수는 각 실험자별로 다음과 같다. A: 11.20, B: 4.87, C: 1.63 / A: 3.94, B: 0.67, C: 0.13 / A: 2.41, B: 0.29, C: 0.04 / A: 0.16, B: 0.19, C: 0.007 / A: 35.70, B: 2.37, C: 1.86으로 나타났으며, 실험자 5명 모두 고정용구 C를 사용하였을 때 가장 안정된 값을 나타냈다. 반면 A를 사용했을 때 4명, B에서 1명이 상대적으로 가장 불안정한 호흡결과를 나타냈다. 결 론: 자체개발한 정위적체부방사선치료 고정용구(arm up holder with vac-lock)는 다른 두 고정용구에 비해 호흡을 안정적으로 유지시킴으로서 조사분할내 종양움직임(intra-fraction organ motion)을 감소시켜 치료효과를 높일 수 있을 것으로 생각된다. 특히 셋업을 장시간 유지시켜야 하는 정위적체부방사선치료의 특성상 시간의 경과에 따라 불안한 호흡주기를 나타낸 다른 두 고정용구에 비해 자체개발한 고정용구가 정위적체부방사선치료에 유용할 것으로 사료된다.