• 한국의류학회지
• /
• 제45권1호
• /
• pp.106-122
• /
• 2021

This study confirmed the mechanical properties of an auxetic re-entrant pattern prepared using 3D printing technology and its composite fabric with neoprene for the production of functional auxetic patterns/textiles for safety shoes. Samples were prepared by the tilt angle of a re-entrant pattern of 0°, 30°, 45°, 60° and 90°, and then analyzed using Poisson's ratio, bending, compression, and tensile properties. A 3D printed auxetic re-entrant pattern (3DP-RE) and its composite fabric (3DP-RE/NP) showed a negative Poisson's ratio in all tilting angles that indicated auxetic properties. The results of the bending property shown that strength of 3DP-RE/NP was 1.5 times lower than NP, but the strain improved 2.0 times. It was confirmed that the deformation of 3DP-RE/NP is possible with a low load. Each sample type of compression behavior indicated similar regardless of the tilting angles; in addition, the compression toughness of 3DP-RE/NP increased 1.2 times compared with NP. In the case of tensile properties, 3DP-RE and 3DP-RE/NP were affected by the tilting angle, samples with 90° (the opposite of load direction) showed best tensile property and toughness. 3DP-RE/NP indicated improved bending, compression, and tensile properties.

• 제어로봇시스템학회논문지
• /
• 제9권9호
• /
• pp.714-719
• /
• 2003

We propose a measuring method of large object using the pattern matching. It is hard and expensive to get the complete 3D data when the object is large and exceeds the limit of measuring devices. The large object is divided into several smaller areas and is scanned several times to get the data of all the pieces. These data are aligned to get the complete 3D data using the pattern matching method such as point pattern matching method and transform matrix algorithm. The laser slit beam and CCD camera are applied for the experimental measurement. Visual C＋＋ on Windows 98 is implemented in processing the algorithm.

• 패션비즈니스
• /
• 제25권3호
• /
• pp.71-89
• /
• 2021

The purpose of this study was to design posture braces for rounded shoulders by examining characteristics of incorrect postures of rounded shoulders. The review of information in literature on rounded shoulder postures, correction exercise methods, and posture correction devices, has prompted this study to determine the design and material of a proper posture brace for rounded shoulders. In order to develop the pattern of a posture brace for rounded shoulders for women, the study carried out a comfort evaluation of the braces based on the 2D patterns through drafting method by utilizing the body measurements and relational formulae associated with the major body measurement such as bust circumference and on the 3D patterns of the brace which were obtained from 3D human model of women in their early 20s in Korea. Differences in angles were noted when 2D and 3D patterns of shoulder posture braces were compared. The side neck point was relocated farther outside in the 3D pattern to allow additional flexibility in the back-neck area, and the shoulder band was lowered by 14.8°, increasing armhole area comfort. The upper hemline of the front panel was found to rotate upward at an angle of 22.0° as the underarm point of the 3D pattern moved upwards than the underarm point of the 2D pattern, which enhanced comfort in the abdomen area. The 3D designs of shoulder posture brace was preferred in this study, as they significantly improved comfort while conducting fit evaluation compared to the 2D patterns of shoulder posture brace.

• 한국의류산업학회지
• /
• 제14권6호
• /
• pp.992-1000
• /
• 2012

This study develops a traditional green fabric pattern design through an apparel CAD system. The method used simulated stage costumes and evaluated the consumer satisfaction connected with a 3D fitting system. The results are as follows. Computerization of the pattern making process can provide higher accuracy and efficiency in apparel pattern making and marking for green fabrics. A Stage costumes design was developed; subsequently, the developed dress patterns are automatically depicted to the input of the body size of the consumer and marked using marking program. This results show that it has an effect on narrow and expensive green fabrics. Stage costumes design can make a simulation by a 3D Fitting system. The results of this study can provide higher consumer satisfaction through a survey of 30 consumers. Stage costumes should attract the sympathy of the spectators. The Acceptance of Andong region's traditional beauty is required. We found that a relationship of performance and clothes, physical functionality and beauty of costumes, possibility of commercialization, and the possible use of a 3D Fitting system use are evaluated. A continuous study of regional culture resources is required since there is a significant possibility for the long-term development of stage clothes.

• 한국지역사회생활과학회지
• /
• 제28권4호
• /
• pp.505-514
• /
• 2017

Although studies on the development of cool touch fabrics have been conducted widely, the effects of fitted pattern on enhancing the cooling sensation are insufficient. To investigate the effect of cool-touch fabric and fit of women's sports underwear, 3D and 2D patterns of sleeveless top and sports leggings were constructed. The performance of cool touch was tested by the Qmax value and wear test with nine subjects. Objective fit evaluation was observed by 3D virtual clothing using Clo software. Subjects rated wearing sensation such as 'cooling sensation, fit, wear comfort and preferences of purchase' using Likert's scale in the environmental chamber at $25^{\circ}C$, 45 %RH. The Qmax value of the cool touch fabric was higher than that of the PET fabric, which was well reflected in 'cooling sensation', especially in the case of a tight-fitted 3D pattern. The cooling sensation of the cool-touch fabric was not significantly elevated with 3D tight pattern as long as the size of the 2D pattern was similar to that of 3D pattern. However, the purchase preference was highly correlated with 3D fit and wear comfort.

• 한국통신학회논문지
• /
• 제41권12호
• /
• pp.1748-1751
• /
• 2016

본 논문에서는 휘어지거나 굴곡진 array인 3차원 conformal array의 beam pattern을 보정하고자 interpolation technique을 3차원으로 확장하여 3-D uniform rectangular array(3-D URA)에 적용하는 방법을 연구하였다. 시뮬레이션 결과는 2차원 interpolation 결과보다 매우 우수한 특성을 보여준다.

• 한국의류산업학회지
• /
• 제8권5호
• /
• pp.552-561
• /
• 2006

This study was conducted to suggest an appropriate jacket bodice pattern for elderly women by comparing the developed pattern with existing ready-made jacket pattern. The developed jacket bodice pattern was produced from the basic sloper in which elderly women's somatotype was fully reflected, by using the newly developed 3D pattern design system. Subjects were 6 elderly women aged from 60 to 69 who have average somatotype in their age group. This study carried out pattern analysis and self-sensory test with three ready-made jackets(national brands) and suggested a developed jacket pattern based on the results. According to the self sensory test results of ready-made jacket, wearing fitness among brands was significantly different even though those brands were same B91 size. The results of ready-made jackets' pattern analysis, size differences among patterns have influenced wearing fitness. The basic numerical formula for the jacket pattern considered elderly women's somatotype were as follows; $B/4+2{\pm}0.2{\sim}0.5$(difference of front and back), $W/4+2{\pm}0.2{\sim}0.5$(difference of front and back), H/4+2~7(ease amount), armhole depth B/4, chest width B/6+1, back width B/6+3 and back neck width B/12+0.5. According to the results of the developed jacket's appearance evaluation, it earned higher scores in silhouette and ease amount, confirming that the developed jacket is appropriate for the elderly women. Also, in the evaluation on space length, the developed jacket pattern was evaluated to allow proper space length in all around of measurement parts.

• 한국정보통신학회논문지
• /
• 제8권5호
• /
• pp.1074-1079
• /
• 2004

지금까지 3차원 정보를 얻기 위하여 CCD카메라, 레이저, 구조화된 격자 발생기 등과 같은 여러 센서들이 사용되어져 왔지만 대부분의 캘리브레이션 알고리즘들은 많은 메모리와 실험 시간을 필요로 하기 때문에 비효율적이었다. 본 논문에서는 실세계 상의 3차원 정보를 얻기 위한 삼각법을 기반으로한 구조화된 격자 캘리브레이션 알고리즘이 소개된다. CCD카메라와 수평으로 설치된 구조화된 격자 패턴 생성기로부터 생성된 빔들이 캘리브레이션 면에 사영된다. CCD 카메라는 대상물과 사영된 빔이 교차한 평면을 측정한다. 그리고 3차원 데이터는 측정된 값과 캘리브레이션 데이터를 이용하여 계산된다. 본 논문에서 제안한 방범은 3차원 정보를 간단한 삼각법으로 획득하였기 때문에 효율적인 측정시간과 메모리 절약의 이점을 가지고 있다.

• 한국의상디자인학회지
• /
• 제25권2호
• /
• pp.97-110
• /
• 2023

The purpose of this study is to develop 3D pattern textile design of traditional Jogakbo motifs and fashion products using it. As a research method, first, through literature review, the three-dimensional representation of geometry on a plane with Jogakbo, design cases were examined. Second, through a survey, the purchase perception and design preference of Jogakbo cultural products was analyzed. Third, based on the results of the survey on color and print, the 3D pattern design for each type of Jogakbo is printed, and then textile fashion cultural products were developed. The results of this study are as follows. First, the reason why the public was not attracted to the purchase of cultural products was disatisfaction with practicality, unsuitable preference, price adequacy, aesthetics, and originality. Therefore, it was analyzed that quality, practicality, price, carry-on storage harmony and manageability, as well as aesthetic design were important factors for consumers. Second, the stereoscopic space on the plane expanded the two-dimensional plane space by forming a cube through the division and dissolution of geometry could be visualized using color expression of cubes of different brightness depending on the direction of light. Third, Jogakbo had eight types consisting of four detailed forms and three arrangement methods. The 3D pattern design could be developed through regular disolution and stereoscopic construction using Jogakbo's representative images for each type. In addition, it was found that it was easy to produce Jogakbo fashion products suitable for modern people through 3D pattern digital textile printing applying traditional colors.

• 한국의류산업학회지
• /
• 제21권1호
• /
• pp.59-66
• /
• 2019

The purpose of this study was to develop slacks pattern of elderly women aged over 60s by using the virtual twin and 3D virtual garment simulation system. The results were as follows; first, By using 3D Virtual Garment Simulation, new slacks pattern considered elderly women was development. The basic numerical formula were as follows, front waist girth W/4+2+1.5, back waist girth W/4+1.5+0.5, front hip girth H/4+0.75, back hip girth H/4+1.5, front crotch extension H/16-0.5, back crotch extension H/8-1.3, front dart amount 2 and back dart amount 1.5. Second, according to the results of the new slacks pattern's appearance evaluation, it estimated more highly than existing pattern in silhouette and ease amount, confirming that new slacks pattern is appropriate for the elderly women. Also, new slacks pattern was evaluated to allow proper space length of waist, abdomen and hip. Virtual models production through 3D body scan data, pattern draft and virtual garment digital program were applied to prototypic design method so as to enhance the fitness of ready-made garments. The use of the virtual twin made it impossible to comprehend the appearances and ease correspondent to motions. In order to evaluate wearing fitness, therefore, the system should be improved so as to change arm positions and perform various motions.