• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.505-508
• /
• 2009

The super multi-view (SMV) display and the high-density directional (HDD) display were proposed as a natural 3D display that is free from the visual fatigue caused by the accommodation-vergence conflict and provides smooth motion parallax. The multi-projection system, the flat-panel system, and the time-multiplexing system are used to construct the HDD displays. The recent progress of the HDD 3D display is reviewed.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.25 no.4
• /
• pp.93-106
• /
• 2023

The study is to develop and present a leggings pattern that is suitable for the human body by using a standard body type avatar for a female in her 30s. As a research method, the average body type was selected from adult women in their 30s, and the appearance was evaluated using the CLO software program. The data analysis of this study compared the dimensions and shape of each part by legging. The leggings pattern suggested based on the above research results was determine to be a total length of 80.6cm and hip length of 24cm, and the knee length was set by dividing the legging in half from the waist to the hem and then adding 5cm. These figures were evaluated higher than Company D in terms of the adequacy of the upper part of the front and rear plates of Company A as well as the adequacy of the knee lines. Company A's figures were applied and corrected. For the front plate, the waist circumference was divided by 4, and 3.5cm was removed, and the hip circumference was set by dividing the hip circumference by 4, and 3.8cm was removed. In the appearance evaluation results Company D was highly evaluated in the suitability evaluation of the waist and hips, and the waist and hips were set using the pattern of Company D. The length of the front panel was modified by dividing the hip circumference by 4 and adding 1.8cm to the length, and the length of the back panel was modified by dividing the hip circumference by 3 and adding 8cm after dividing the hip circumference by 0.8cm.

• Fisheries and Aquatic Sciences
• /
• v.16 no.2
• /
• pp.101-108
• /
• 2013

An active stimulating device (ASD) consisting of a net panel or ropes fluttering in the turbulence inside the cod end was effective in driving fish near the cod end to reduce juvenile by-catch. The fluttering characteristics of the rope and net panel were examined by video observations and analyzed for fluttering amplitude and period in a water channel and in field experiments with a bottom trawl. The amplitude ratio of the fluttering ropes or nets in the tank test increased with the fluttering index as the diameter of the twine, mesh size, flexibility, and flow velocity changed, whereas the period decreased with the above factors. In bottom trawl experiments, the range of mean depth difference in the fluttering net panel was 12-17% of the length of the fluttering net, and the period of depth difference or three-dimensional (3D) tilt was revealed, with shorter ones ranging from 2 to 6 s. The amplitude as depth difference and period from field measurements were similar to those of nets in tank experiments and also to the period of 3D flow velocity inside the cod end. These results could be used to design an ASD that could be used for to the cod end of actual towed fishing gear to reduce juvenile by-catch.

• Steel and Composite Structures
• /
• v.19 no.6
• /
• pp.1403-1419
• /
• 2015

When precast concrete infill panels are connected to steel frames at discrete locations, interaction at the structural interface is neither complete nor absent. The contribution of precast concrete infill panels to the lateral stiffness and strength of steel frames can be significant depending on the quality, quantity and location of the discrete interface connections. This paper presents preliminary experimental and finite element results of an investigation into the composite behaviour of a square steel frame with a precast concrete infill panel subject to lateral loading. The panel is connected at the corners to the ends of the top and bottom beams. The Frame-to-Panel-Connection, FPC4 between steel beam and concrete panel consists of two parts. A T-section with five achor bars welded to the top of the flange is cast in at the panel corner at a forty five degree angle. The triangularly shaped web of the T-section is reinforced against local buckling with a stiffener plate. The second part consists of a triangular gusset plate which is welded to the beam flange. Two bolts acting in shear connect the gusset plate to the web of the T-section. This way the connection can act in tension or compression. Experimental pull-out tests on individual connections allowed their load deflection characteristics to be established. A full scale experiment was performed on a one-storey one-bay 3 by 3 m infilled frame structure which was horizontally loaded at the top. With the characteristics of the frame-to-panel connections obtained from the experiments on individual connections, finite element analyses were performed on the infilled frame structures taking geometric and material non-linear behaviour of the structural components into account. The finite element model yields reasonably accurate results. This allows the model to be used for further parametric studies.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.733-738
• /
• 2006

As the film transistor-liquid crystal display (TFTLCD) panels become larger and provide higher resolution, the propagation delay of row and column lines, the voltage modulation of Vcom, and the response time of liquid crystal affect the display images now more than in the past. It is more important to understand the electrical characteristic of TFT-LCD panels these days. This paper describes the electrical model of a 15-inch XGA ($1024{\times}768$) TFT-LCD panel. The parasitic resistance and capacitance of its panel are obtained by 3D simulation of a sub pixel. The accuracy of these data is verified by the measured values in an actual panel [1]. The developed panel simulation platform, the equivalent circuit of a 15-inch XGA panel, is simulated by HSPICE. The results of simulation are compared with those of experiment, according to changing the width of signal. Especially, the proposed simulation platform for modeling TFTLCD panels can be applied to large size LCD TVs. It can help panel and circuit designers to verify their ideas without making actual panels and circuits.

• Journal of Ocean Engineering and Technology
• /
• v.12 no.2 s.28
• /
• pp.97-110
• /
• 1998

The numerical damping and dispersion error characteristics associated with difference schemes and a panel shift method used for the calculation of steady free surface flows by a panel method are an analysed in this paper. First, 12 finite difference operators used for the double model flow by Letcher are applied to a two dimensional cylinder with the Kelvin free surface condition and the numerical errors with these schemes are compared with those by the panel shift method. Then, 3-D waves due to a submerged source are calculated by the difference schemes, the panel shift method and also by a higher order boundary element method(HOBEM). Finally, the waves and wave resistance for Wigley's hull are calculated with these three schemes. It is shown that the panel shift method is free of numerical damping and dispersion error and performs better than the difference schemes. However, it can be concluded that the HOBEM also free of the numerical damping and dispersion error is the most stable, accurate and efficient.

• Transactions of Materials Processing
• /
• v.20 no.7
• /
• pp.512-517
• /
• 2011

TRB(Tailor Rolled Blank) is an emerging manufacturing technology by which engineers are able to change blank thickness continuously within a sheet metal. TRB door inner panels with required larger thicknesses can be used to support localized high loads. In this study, the aluminum alloy 5J32 TRB sheet is used for a door inner panel application. The TRB material properties were varied by using three heat treatment conditions. In order to predict the failure of the aluminum TRB during simulation, the forming limit diagram, which is used in sheet metal forming analysis to determine the criterion for failure, was investigated. Full-field photogrammetric measurement of the TRB deformation was performed with an ARAMIS 3D system. A FE model of the door inner panel was created using Autoform software. The material properties obtained from the tensile tests were used in the numerical model to simulate the door inner of AA 5J32 for each heat treatment condition. After finite element analysis for the evaluation of formability, a prototype front door panel was manufactured using a hydraulic press.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.12
• /
• pp.1033-1038
• /
• 2006

We carried out the experiments on particle deposition onto the cleanroom wall panels. And then we investigated the particle deposition characteristic coefficients for electrostatic voltages and particle size. It was found that there is little difference in characteristics of the particle deposition between the steel panel and the anti-static coating panel. In case of that the particle size is under $1.0{\mu}m$, the particle deposition characteristic coefficient becomes larger as the electrostatic voltage induced to the cleanroom wall panel is increasing. Where in case of that the particle size is over $3.0{\mu}m$, the particle deposition characteristic coefficients do not show any differences with the electrostatic voltages. It is due to that the electrostatic force is the major particle transport mechanism for submicron particles, while the gravitational settling is the major particle transport mechanism for overmicron particles when the electro-static voltages are induced to the cleanroom wall panel.

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.1907-1910
• /
• 2003

This paper describes a method of stereo image composition for mixed reality without camera calibration or complicate tracking algorithm. The proposed system tracks the panel which has blob makers, and composes virtual objects naturally using the method of texture mapping which is often used in geological computer graphics mapping when we do mapping 2D computer graphic data or man-made 2D images. The proposed algorithm makes it possible for us to compose virtual data even in the case that the panel is bent. For composing 3D object, the system uses depth information obtained from stereo image so that we do not need cumbersome procedure of camera calibration.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.9
• /
• pp.4259-4265
• /
• 2012

Digital technologies and raising problems in freeform building design and construction in Korea were examined in this paper. Three Korean building cases were researched by having interviews with experts and documentary survey for this purpose. The following problems and important points were drawn from this research. The necessity of panel optimization, significance of the secure file conversion, difficulties in securing constructability of freeform building and using of 3D data for manufacturing panels.