• 한국공간구조학회논문집
• /
• 제17권4호
• /
• pp.167-174
• /
• 2017

The F3D(Free-Form Formwork 3D Printer) technology that manufactures EPS(Expanded Polystyrene) formworks for irregular-shaped concrete structures by 3D printers was developed to reduce the cost and time. Because of weak strength and low elastic modulus of the EPS, structural performance including lateral pressure by fresh concrete of the formwork that consisted of EPS should be investigated. In order to calculate lateral pressures acting on formwork, several variables including sizes, shapes of formwork, tangential force(fricition) between fresh concrete and formwork, and material properties of fresh concrete should be considered. However, current regulations have not considered the properties of concrete, only focused on vertical formwork. Galleo introduced 3-dimensional finite element analysis models to calculate lateral pressure on formwork. Thus, proposed finite element analysis model based on previous studies were verified for vertical formwork and irregular-shaped formwork. The test results were compared with those by FEM analysis. As a result, the test agrees well with the analysis.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 추계 학술논문 발표대회
• /
• pp.69-70
• /
• 2016

The constructability of formwork has a significantly influence on the duration and cost in tall building construction. However, current installation and dismantling process are conducted with heuristic approaches due to the absence of reasonable constructability review method. This study proposes a new method to review the constructability of formwork by utilizing 3D printing technology. It is expected that the suggested review method could reduce formwork duration and cost with subjective, but rational manner.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.112-113
• /
• 2019

In this study, development of 3D software for automated formwork design was conducted to achieve optimization and reduction of labor for temporary work. Through the literature review, the current technical level was identified and the required functions of 3D software for automated formwork design were derived. The 3D software should be developed with the aim of automating 3D design, improving construction quality and utilizing the Internet of Things. As a preliminary step to develop 3D software, the prototype demo version was developed to implement 3D design automation function, which confirm the possibility of 3D software development.

• 한국BIM학회 논문집
• /
• 제12권1호
• /
• pp.1-9
• /
• 2022

Concrete formwork is a crucial component for any construction project. Artificial intelligence offers great potential to automate formwork design by offering various design options and under different criteria depending on the requirements. This study applied image segmentation in 2D formwork drawings to extract sheathing, strut and pipe support formwork elements. The proposed artificial intelligence model can recognize, classify, and extract formwork elements from 2D CAD drawing image and training and test results confirmed the model performed very well at formwork element recognition with average precision and recall better than 80%. Recognition systems for each formwork element can be implemented later to generate 3D BIM models.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.1113-1116
• /
• 2009

The attempt to use a 3D model each field such as design, structure, construction, facilities, and estimation in the construction project has recently increased more and more while BIM (Building Information Modeling) that manages the process of generating and managing building data has risen during life cycle of a construction project. While the 2D Drawing based work of each field is achieved in the already existing construction project, the BIM based construction project aims at accomplishing 3D model based work of each field efficiently. Accordingly, the solution that fits 3D model based work of each field and supports plans in order to efficiently accomplish the relevant work is demanded. The estimation, one of the fields of the construction project, has applied BIM to calculate quantity and cost of the building materials used to construction works after taking off building quantity information from the 3D model by a item for a Quantity Take-off grouping the materials relevant to a 3D object. A 3D based estimation program has been commonly used in abroad advanced countries using BIM. The program can only calculate quantity related to one 3D object. In other words, it doesn't support the take-off process considering quantity of a contiguous object. In case of temporary materials used in the frame construction, there are instances where quantity is different by the contiguous object. For example, the formwork of the temporary materials quantity is changed by dimensions of the contiguous object because formwork of temporary materials goes through the quantity take-off process that deduces quantity of the connected object when different objects are connected. A worker can compulsorily adjust quantity so as to recognize the different object connected to the contiguous object and deduces quantity, but it mainly causes the confusion of work because it must complexly consider quantity of other materials related to the object besides. Therefore, this study is to propose the solution that automates the formwork 3D modeling to efficiently accomplish the quantity take-off of formwork by preventing the confusion of the work which is caused by the quantity deduction process between the contiguous object and the connected object.

• 한국건설관리학회논문집
• /
• 제22권1호
• /
• pp.81-89
• /
• 2021

최근 건축물의 디자인이 정형에서 벗어나서 창의적인 형태를 갖는 비정형 건축물로 변하는 추세이며, 이에 따른 건설기술의 척도가 비정형 건축물의 건축 설계, 시공 등으로 바뀌고 있다. 3D 프린팅 기술 중 하나인 FDM 적층방식을 이용하여 다양한 형태의 비정형 거푸집을 기존 거푸집에 비하여 저렴하고 빠르게 제작할 수 있으며, 인력문제 등을 해소할 수 있을 것으로 보인다. 3D 프린터를 이용하여 PLA 필라멘트 비탈형 거푸집을 원기둥형과 직육면체 형태로 제작하여 재령 28일의 기준을 통한 압축파괴 실험과 변형정도, 재사용성 여부 등을 검토하여 PLA 필라멘트 거푸집에 대한 사용성을 검증하였다. 추가적으로 실험체의 크기를 다르게 하여 크기에 따른 실험도 진행하였다. 실험결과 필라멘트 거푸집 자체가 약3~4MPa의 강도를 갖는 것으로 확인되었으며, 기존 선행연구와 실험을 통한 데이터를 검토한 결과 Infill 60% 이상으로 사용해야 적절하며, 강도적인 측면에서도 유리한 것으로 확인되었다. 필라멘트 거푸집의 절단, 탈형 결과 표면이 매우 깨끗하고 손상이 없어 재사용도 가능할 것으로 기대된다.

• Steel and Composite Structures
• /
• 제21권5호
• /
• pp.1105-1119
• /
• 2016

In this study, it is presented that a new developed approach for equivalent area-distributed loading (EADL) induced from a single concentrated force. For the purpose, a full scale 3D steel formwork system was constructed in laboratory conditions. A developed load transmission platform was put on the formwork system and loaded step by step on the mass center. After each load increment, displacement was measured in several crictical points of the system. The developed platform which was put in to slab of formwork to equivalently distribute the load from a point to the whole slab was constituted using I profiles. A 3D finite element model of the formwork system was analyzed to compare numerical displacement results with experimental ones. In experimental tests,difference among the displacements obtained from reference numerical model (model applied EADL) and main numerical model (model applied single load using a load cell via load transmission platform) is about %13 in avarage. Difference among the displacements obtained from experimental results and main numerical model under 30 kN single load is about %11 in avarage. The results revealed that the displacements obtained experimentally and numerically are dramatically closed to each other. It is highlighted from the study that the developed approach is reliable and useful to get EDL.

• 한국건설관리학회논문집
• /
• 제23권1호
• /
• pp.113-117
• /
• 2022

적층제조(AM, 일명 3D프린팅)기술은 디자인 자유도가 높고 디지털화된 기술의 특성으로 품질데이터의 예측·관리가 용이한 형태로 존재한다. 이러한 이점으로 AM기술은 다양한 산업에 적용되고 있다. 특히 건축물과 기반시설을 AM기술로 제조하는 방법이 건설 산업에 제안되고 있다. 다만, 다소 부족한 기술의 역사와 품질 및 시공 관리방법의 미비, 제조상품의 인증과 같은 문제로 인해 기술사용이 제한되고 있다. 따라서 간접적인 형태로 AM기술을 활용하여 건축 상품제조를 구현하고 있다. 특히, 거푸집을 적층 제조하고 건축 소재를 투입하여 상품으로 구현하는 방법이 확인되고 있다. 본 연구에서는 대형크기의 거푸집을 적층제조하고 건축 상품을 구현하기 위해 하이브리드 압출적층제조를 활용한다. 또한, 적층제조과정에서 생산성과 경제성을 예측할 수 있는 인자를 확인한다. 결과적으로, 건축물의 구현결과와 생산 비용과 시간을 줄이기 위한 형상설계 최적화 방법을 제안한다.

• 한국BIM학회 논문집
• /
• 제5권2호
• /
• pp.12-18
• /
• 2015

Bridge piers typically have circular or rectangular shapes without decorative design. Prefabrication for accelerated construction has been widely adopted in bridge structures. Cost for steel formwork is a main restriction of creative irregular shapes. 3D modelling techniques allow creative design of columns and 3D printing provides possibility to minimize the fabrication cost. In this paper, 3D design process of bridge piers was suggested by converting 2D picture into 3D decorative shape. Formwork design using 3D printed panels was also proposed and mock-up tests were conducted. Precast columns need accurate geometry control from fabrication to assembly. Laser scanning and geometry control devices were adopted. Through the digitalized process of design, fabrication and assembly, creative design of structures can be realized in reasonable cost range.

• 국제초고층학회논문집
• /
• 제4권3호
• /
• pp.161-169
• /
• 2015

Experience on the construction of several 100-plus-story skyscrapers including Guangzhou West Tower, Guangzhou East Tower, and Shenzhen's KK100 is described considering the increasingly strong development trend of 100-plus-story skyscrapers in China. Difficulties in the construction of 100-plus-story skyscrapers are investigated. Four innovative construction technologies receive detailed descriptions: intelligently and entirely-jacked work platforms, formwork and suspension scaffolding systems ("jacking and formwork systems"), multi-function low-carbon concrete, 5D-BIM ("five-dimensional building information modeling"), and safe and rapid vertical transport, as they have found successful applications in actual projects. Popularized systematically as technical achievements, these technologies will significantly influence the construction of similar projects in the future, and produce more social and economic benefits.