• Journal of the Korea Furniture Society
• /
• v.25 no.3
• /
• pp.165-172
• /
• 2014

3D form study is one of basic subjects in industrial design education. There are an array of textbooks of visual art, design and architecture, most of which address basic geometrical form study and abstract forms. With the introduction of computerization, current trends are directed to reduce basic form education and students' participation in classes and their accomplishments. This study was intended to develop works under a theme of furniture design with concrete shapes and functions. This study focused on developing relevant process by fusing 3D form study and furniture design which fall into basic design and design studio subjects, respectively. Among 3D form studies, applied were a concept of 3D configuration that explores the relations between surface forms and 3D forms. Furniture design is a challenge to students at beginner or intermediate level in basic design education from initial devising stage to production in kind. To ease high level of difficulties at designing and producing stages, technical education was systematized in the process of conceptualizing, developing idea and production. This type of challenge was carried out during separate semesters, along with a case study done to develop different types of challenges. This study helped students to be motivated and actively participate in classes and well perform advanced form study and technical training from design to actual production.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.71-72
• /
• 2022

In the case of free-form buildings, it is difficult to reuse the form for panel production because the shape and size of the interior and exterior panels of the building are different. In general, it is a free-form concrete panel (FCP) production technology using the existing plywood formwork, and the form is produced in a different shape each time and is discarded after only one use. The production of these disposable forms requires enormous resources, including materials, labor and time. Hence, it is necessary to develop innovative forms that can be reused for sustainable FCP construction. In this study, a technology has been developed that combines 3D Plastering Technique (3DPT) to produce FCP. By applying this technology to free-form building projects, the time and cost required for FCP production can be reduced. However, specific studies on the production process for this technology have not been done yet. Therefore, the objective of this study is a basic study of free-form concrete panel production process using 3D plastering technique.

• Fashion & Textile Research Journal
• /
• v.20 no.6
• /
• pp.722-732
• /
• 2018

This study was to develop a dress form that is highly representative of the body shapes of senior men in their 50s and 60s. And this research was compared the measurements and forms of three different dress forms available in the market, in order to analyze the body type and suitability and provide a standard for developing and utilizing the dress forms. After extracting the body shapes of the senior men's 3D shape, the body type that is curvature on the back prevalent among senior men, was chosen. The dress form was created as follows: 3D modeling and rendering, printing with a FDM-type 3D printer. The dress forms were 3D-scanned and the 3D data was analyzed - classification drop value, area deviation, compared horizontal section and vertical section. The results were as follows: This suggested that the area deviation amount at the chest and hip circumference levels was larger in the commercial products than in the dress form in this study, while that at the waist circumference level was larger in the dress form in this study. The vertical length of the lateral shoulder point-waist circumference was smaller, the side shape showed severe curvature on the back, and the waist circumference was larger in the senior men dress form than the commercial products. The dress form developed in this study reflected the body type of senior men and, therefore, were suitable for fitting when creating clothes for senior men.

• Fashion & Textile Research Journal
• /
• v.24 no.4
• /
• pp.451-459
• /
• 2022

This study aimed to develop a a custom-made dress form for draping using a live model's 3D body scan obtained from an entry-level 3D handheld scanners, 3D modeling software and 3D printing technology. A female subject was recruited whose body size fell under the normal (N) body shape criteria suggested by KS K 0051. First, the handheld scanner reduced the length of the legs in scanning, but most of the scanning operations between the neck and crotch levels were conducted accurately. Therefore, this study was designed to develop a torso dress form. The full body 3D scan was edited into a torso shape using ZBrush® software. Using Rhinoceros^® and Materialise's Magics software, a 3D body scan was modeled so that the user could fit two types of mannequin stands (one with a neck fixation from above and one with an insert from below) to the dress form. The body scan was divided into 9 pieces to fit the printable size of the Stratasys 3D printer Fortus 250mc, and the cross-sectional distance from the center to the periphery was downsized by 2 mm. After outputting the dress form scan file with a 3D printer, the dress form was manufactured by the first covering it with a 4 oz nonwoven pad and the second covering with a single jersey material.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2008.11a
• /
• pp.181-187
• /
• 2008

It's difficult for other designer to understand easily, due to existing abstract form-generation method of digital authors like Greg Lynn and Peter D. Eisenman. This study uses IDEF${\emptyset}$ process diagram in order to remodel procedures and elements of this abstract 3d based form-generation method. IDEF${\emptyset}$ process diagram is the method operated prior to a design of digital program. For object-oriented modeling of each form-generation element technology, IDEF${\emptyset}$ process has been modeled. For this sort of IDEF${\emptyset}$ process modeling, digital architectural theory and analysis method has been generalized With them above, this study suggests the 3d-based form-generation IDEF${\emptyset}{\emptyset}$process model for developing digital tool eventually through the object-oriented components and setting up the mutual roles, relation as well. In conclusion, 3d-based form-generation IDEF${\emptyset}$process model, this study suggests, models form generation methods of existing digital authors using IDEF${\emptyset}$ process for developing digital tool in the future.

• The Research Journal of the Costume Culture
• /
• v.24 no.6
• /
• pp.725-742
• /
• 2016

In the Korean fashion industry, 3D printing systems are considered as new technology and a new opportunity. With 3D printers, consumers can be manufacturers and individuals can develop businesses with little upfront capital. In this study, a dress form for the typical Korean women's body shape was developed using 3D technology (3D scanning, 3D modeling, and 3D printing). Ten women with apparel sizes 85-91-160 were selected from 3D body-scan data collected by SizeKorea of 201 women aged 25 to 34 (2010). First, 15 horizontal cross-sections were collected from the 3D scan data of the 10 subjects. Then, inside lines of those cross-sections were drawn at 15-degree intervals, and the lengths were measured. The average of the inside lines was connected to the internal spline curve, and the curves were used as the average cross-sections. The average torso body and the dress form of Korean women were developed into a 3D solid model using a 3D CAD program (Solidworks 2012). An output mockup was printed by the FDM type's 3D printing system (Bonbot 1200, Bonbot 3-H4) using PLA material. The dimensions comparing the 3D solid modeling to the 3D printed mockup of the dress form were measured, and minor differences were between 0.00cm and 0.40cm. In the future, 3D printing systems are expected to be in use for various personalized dress forms.

• Cartoon and Animation Studies
• /
• s.36
• /
• pp.45-74
• /
• 2014

We can anticipate that animations will form one of the axes and lead popular culture in our future visual age. Recently, research has been actively conducted, but it mainly focuses on their value in culture industry or technologies and methods of producing animations. Of course, research that deals with animation characters has constantly come out. This study focuses on the 'formative elements' of 3D animation characters and attempts differentiation from other research by inducing new logic theoretically. Being freed from the research on characters that has been merely focused on theoretical grounds, this study intends to figure out how audience that is consumers who actually get to watch and feel animations recognizes them and find out related problems and also solutions for them. In particular, this study intends to examine the formative characteristics of 3D animation characters with the characters appearing in , one of the animations that have achieved artistic value as well as commercial success. And for that, the study conducted not only literature review but various surveys and Delphi method as well. Also, the researcher devised an analysis frame to evaluate the formative elements through in-depth discussion with experts. And with this, the study created the forms such as the Elements of Form, Formation Methods of Form and Visual Recognition Elements of Form, examined how audience recognized 3D characters. The process of recognizing an image is influenced by socio-cultural environment or sex, age, and the level of knowledge differently. This was meant to investigate current visual culture and the public's perspective through characters in that represent the visual mode.

• Design Convergence Study
• /
• v.16 no.1
• /
• pp.97-109
• /
• 2017

Interest in the exterior design of buildings has increased in recent years. Demand for various architectural structures is increasing. However, domestic form liner and design are still limited. Thus, this research uses 3D printers to omit the existing mold production process. Use digital data to produce products economically using various materials. It can be hoped that extending the lifespan of the concrete structure will reduce the cost of saving costs. The purpose of this study is to utilize the 3D printers to develop the design of a suitable formative shape for the purposes of the concrete. In this study, 3D printed form enables the possibility that the actual application is practical. Consideration for the artistic design of the art line was proposed for the purpose of considering the use of concrete structures for concrete structures.

• Fashion & Textile Research Journal
• /
• v.22 no.1
• /
• pp.87-93
• /
• 2020

This study provide basic data to develop a dress form reflecting body shape characteristics by age and to produce a 3D body form in a virtual fitting program. A comparative analysis was conducted on the size, section shape, and slope of side shape of the modeling form by the sizing of the basic female avatar in CLO 3D, one of the 3D apparel CAD programs and the body form of women in their 20s-50s by body shape in the 6th Size Korea (2010). First, all the differences were formed similarly in the direct measurements between the 3D avatar and the body form were within 1 mm. Second, in a comparison of the section form of the avatar and body form in Size Korea, the avatar was formed in straight body shape and did not reflect a spinal curvature according to age. As a result of an examination of the items with a difference over 5° in the slope of side shape, there were angle differences in numerous body shapes in the angles of the side upper abdomen, side upper back, and side upper bust, and the avatar's bust shape was expressed more flatly compared to body form. It will be possible to produce an avatar that can adequately reflect body shape characteristics by adding detailed length and angle items by the region like waist back length and front length in producing the avatar reflecting body shape characteristics, instead of a standard body shape.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.4
• /
• pp.632-638
• /
• 2002

Extensible 3D(X3D) is a software standard for defining interactive web and broadcast-based 3D content integrated with multimedia. The data size of Web3D representation based on polygon meshes is so large that transferring practical data fast is a hard problem. This paper proposes 3D object structure, a new framework for compact 3D representation with high quality surface shape. By utilizing a free form surface technique, qualified surface are transferred with limited amount of data size and rendered. 3D graphic structure can be regarded ad both polygon meshes and free form surfaces. Therefore, it can be easily integrated to existing Web3D data formats, for example VRML ＆ XML. 3D object structure also enables modeling free form surface shapes intuitively with polygon modeling like operations.