• 한국의류산업학회지
• /
• 제10권5호
• /
• pp.713-720
• /
• 2008

The purpose of this study was to propose the method reproducing three dimensional figure data to a reconstructed body by the styrofoam board. To make the reconstructed body, the 3D figure data were rotated to make symmetry and the surfaces were edited. The horizontal curves were gathered equally-spaced based on the waist horizontal plane. we proposed the process to cut the styrofoam board according to the horizontal curves, to assemble them to organize the shape of the body figure and to coat the surface with the knitted. The 3-dimensional figure data of straight type, swayback type, lean-back type and bend-forward type were selected and the reconstructed bodies were made as above. And the compatibility was verified by the measurement comparison and deviations between 3-dimensional figure data and reconstructed body.

• 사상체질의학회지
• /
• 제19권3호
• /
• pp.51-61
• /
• 2007

1. Objectives The Face is an important standard for the classification of Sasang Constitutions. We are developing 3D Automatic Face Recognition Apparatus(3D-AFRA) to analyse the facial characteristics. This apparatus show us 3D image and data of man's face and measure facial figure data. So We should examine the Measurement of Facial Figure data error of 3D Automatic Face Recognition Apparatus(3D-AFRA) in Software Error Analysis. 2. Methods We scanned face status by using 3D Automatic Face Recognition Apparatus(3D-AFRA). And we measured lengths Between Facial Definition Parameters of facial figure data by Facial Measurement program. 2.1 Repeatability test We measured lengths Between Facial Definition Parameters of facial figure data restored by 3D-AFRA by Facial Measurement program 10 times. Then we compared 10 results each other for repeatability test. 2.2 Measurement error test We measured lengths Between Facial Definition Parameters of facial figure data by two different measurement program that are Facial Measurement program and Rapidform2006. At measuring lengths Between Facial Definition Parameters, we uses two measurement way. The one is straight line measurement, the other is curved line measurement. Then we compared results measured by Facial Measurement program with results measured by Rapidform2006. 3. Results and Conclusions In repeatability test, standard deviation of results is 0.084-0.450mm. And in straight line measurement error test, the average error 0.0582mm, and the maximum error was 0.28mm. In curved line measurement error test, the average error 0.413mm, and the maximum error was 1.53mm. In conclusion, we assessed that the accuracy and repeatability of Facial Measurement program is considerably good. From now on we complement accuracy of 3D-AFRA in Hardware and Software.

• 디지털융복합연구
• /
• 제12권9호
• /
• pp.335-341
• /
• 2014

3D 프린터의 특허권이 만료됨에 따라 3D프린터 시장의 활성화와 미래 산업에 대한 밝은 전망 등을 다룬 언론의 기사들이 등장하고 있다. 3D 프린터가 일반 프린터처럼 대중화 되기 위해서는 무엇이 필요할까? 그 해답은 알기 위하여 일반인들을 대상으로 3D프린터의 활성화에 대한 온라인 설문을 실시하였다. 그 결과 일반인들은 3D프린터를 이용한 활용에 있어서 창작 출력물과 피규어를 선호하고 있으며, 출력데이터인 디지털 설계도를 직접 제작보다는 유료/무료 다운로드를 이용한 활용을 더 많이 원하는 것으로 나타났다. 일반인들의 3D프린터의 대중화와 활성화를 위하여 피규어는 영상미디어 콘텐츠들을 자주 접하는 일반인들에게 친숙한 대상이며, 더 나아가 3D프린터를 활용하고 싶다는 욕구를 갖게 하고 프린터를 구매하는 동기부여 요소를 지니고 있다고 사료된다. 피규어 콘텐츠의 디지털 설계도 보급을 위해 관련 규제와 법을 마련하고, 판매의 장인 온라인 마켓을 활성화한다면 3D 프린터의 활성화에 많은 도움이 될 것으로 사료되어진다.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제15권10호
• /
• pp.796-800
• /
• 2009

컴퓨터 그래픽스 기술의 발전으로 3D 인간 형상 표현과 애니메이션 생성을 위한 소프트웨어 도구들이 많이 개발되었고 현재 많이 활성화되어 있다. 그러나, 이러한 도구들로 제작한 인체 모델들간의 공통 데이터 형식의 부재로 인체 모델과 모션의 데이터 교환에는 아직 어려움이 따른다. 이와 같은 문제를 해결하기 위해서 3D 인간 형상을 표현하는 규약이 ISO/IEC JTC1 SC24와 Web3D Consortium에서 공동으로 개발된 H-Anim이다. H-Anim에서는 인체 형상 구조에 대한 형식은 정의하였으나 모션 데이터에 대한 형식은 아직 포함하지 않고 있다. 본 연구는 인체의 모델 데이터 뿐 아니라 모션의 데이터 형식을 정의하고, 서로 다른 프로그래밍 환경에서도 모델링 데이터와 모션 데이터를 서로 독립적으로 사용할 수 있도록 하는, 호환성 있는 인체 애니메이션 실현을 목적으로 한다. 본 연구에서는 H-Anim 캐릭터 모델에 키프레임 애니메이션 파라미터를 입력할 수 있는 구문을 정의하고 이를 구현한 결과를 보여준다. 이 때 애니메이션 파라미터 생성을 위해 임의의 일반 그래픽스 도구에서 독립적으로 제작한 캐릭터 모델을 H-Anim 캐릭터로 변환하고 새로운 애니메이션 생성을 위한 파라미터 설정 방법에 대해서도 설명한다.

• 사상체질의학회지
• /
• 제19권2호
• /
• pp.30-39
• /
• 2007

1. Objectives The Face is an important standard for the classification of Sasang Constitution. We are developing 3D Automatic Face Recognition Apparatus(3D-AFRA) to analyse the facial characteristics. This apparatus show us 3D image and data of man's face and measure facial figure data. So we should examine the figure restoration error of 3D Automatic Fare Recognition Apparatus(3D-AFRA) in hardware Error Analysis. 2. Methods We scanned Face status by using 3D Automatic Face Recognition Apparatus(3D-AFRA). And also we scanned Face status by using laser scanner(vivid 9i). We compared facial shape data be restored by 3D Automatic Face Recognition Apparatus(3D-AFRA) with facial shape data that be restorated by 3D laser scanner. And we analysed the average error and the maximum error of two data. 3. Results and Conclusions In frontal face, the average error was 0.48mm. and the maximum error was 4.60mm. In whole face, the average error of was 0.99mm. And the maximum error was 6.64mm. In conclusion, We assessed that accuracy of 3D Automatic Face Recognition Apparatus(3D-AFRA) is considerably good.

• ETRI Journal
• /
• 제24권3호
• /
• pp.190-196
• /
• 2002

This paper presents millimeter wave monolithic microwave integrated circuit (MMIC) low noise amplifiers using a $0.15{\mu}m$ commercial pHEMT process. After carefully investigating design considerations for millimeter-wave applications, with emphasis on the active device model and electomagnetic (EM) simulation, we designed two single-ended low noise amplifiers, one for Q-band and one for V-band. The Q-band two stage amplifier showed an average noise figure of 2.2 dB with an 18.3 dB average gain at 44 GHz. The V-band two stage amplifier showed an average noise figure of 2.9 dB with a 14.7 dB average gain at 65 GHz. Our design technique and model demonstrates good agreement between measured and predicted results. Compared with the published data, this work also presents state-of-the-art performance in terms of the gain and noise figure.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1092-1094
• /
• 2009

The purpose of the research was to figure out the optimal binocular parallax inducing the least 3D visual fatigue. Subjective 3D visual fatigue was measured while the revolution depth and the average depth of an object were manipulated. The optimal binocular parallax was figured out by using data fitting method.

• 한국의류학회지
• /
• 제33권7호
• /
• pp.1109-1120
• /
• 2009

This study develops a fitted torso type basic pattern for men by utilizing 3D body scan data. Recent fashion trends are reflected in the development of the pattern. The subjects were 15 men in their 20's, who wear size 95 (M size). Body scan data was obtained through a 3D whole body scanner (WB4, Cyberware, USA), and a body surface development figure for developing male fitted torso type basic pattern was attained through the use of Rapid Form 2006 as well as Auto CAD 2006 programs. The results are as follows: A body surface development figure through body surface segment method showed high exactitude in an error range of 100$\pm$1%. In addition, it occurred in an error range of 100:1:3% because of the hard scanning conditions in the incline of the shoulder and armpit areas. However, the body surface development figure as well as the direct measurement results can be used as basic data for the given patternmaking since the error range falls into 100$\pm$3%. Dart amounts obtained from the average cross section were center back 2.2cm (24.3%), back armpit point 3.8cm (41.8%), front armpit point 3.0cm (33.9%). As shown the jacket pattern, the biggest dart amount was portioned out at the back armpit point. The drafting equations for the development pattern acquired are as follows; Full width=C/2+5cm, back length=height/4-1cm, armhole depth=(C/10+12cm)+3cm, back width=2C/10+2cm, front width=2C/10. The development pattern was a fitted torso basic pattern that was composed of 3 pieces, so it would be very useful in developing shirt or jacket patterns. According to the results of the evaluation of the developed pattern appearance, it obtained higher scores of over 3.5 points in almost items, meaning that the developed pattern is appropriate for a male fitted torso type basic pattern. It suggests a possibility of patternmaking from a body surface development figure in 2-D to prototype.

• 전자공학회논문지D
• /
• 제34D권5호
• /
• pp.7-13
• /
• 1997

A X-band 3-stage monolithic LNA (low noise amplifier) with series feedback has been successfully desined and demonstrated by suign 0.5-$\mu\textrm{m}$ GaAs MESFET. In the design of the 3-stage LNA, the effects of series feedback to the noise figure, the gain, and the stability have been investigated ot find the optimal short stub length. As a result, the inductive series feedback topology which has 10degree short stub in the GaAs MESFET source lead, has been employed in the 1-st stage. The fabricated MMIC LNA's chip size is only 1mm$^{2}$/stage, which is smaller than the previously reported X-band MMIC input/output return losses are less than -10dB and -15dB, respectively. The noise figure (NF) is less than 2.6dB. The measured data show good agreement with the simulated values.

• 한국의류산업학회지
• /
• 제8권2호
• /
• pp.209-213
• /
• 2006

The 3-D information is useful as basic data which has been utilized in the development of simulating technology as fit-simulation. The experiment is designed to take some useful data on the variant shapes which contribute in simulating the adaptability of the clothes. The general figure of the clothes are made after the figure of the basic standing posture of the human body. The shape of the clothes fits with kinetic characteristic of the human body as the form of the clothes gets twisted, the ease of the clothes changes, and the clothes itself expands. We studied the dressed shapes of blouse according to two types of the arm movement(basic posture and reach forward) and three types of clothes(foundation, blouse with short sleeves and sleeveless) in the sit-down-posture. We accomplished some experimental data on three-dimensional measurement of the dressing shapes using TDS-3100 3-D scanner made in Japan PULSTECH. It is considered that the variant of shapes and distribution of gaps in the dressed shapes of blouse are determined by the adaptability of clothes made in arm movement.