• 한국해안·해양공학회논문집
• /
• 제23권6호
• /
• pp.466-473
• /
• 2011

온배수의 수중 방류 시 강한 방류 모멘텀 플럭스와 부력 플럭스에 의해 수중제트 인근에는 부력제트가 지배적인 근역이 형성되며, 이러한 근역을 해석하는 도구로써 비정수압 RANS 방정식을 적용한 전산유체역학(CFD) 모델을 이용하여 근역에 대한 적용성을 검토해 보았다. 과거 연구된 바 있는 원형 부력제트 수리실험과 유사한 조건으로 모델을 구성하고 정류시의 수평 부력 제트 경우와 가로흐름시 수직 부력 제트 경우에 대해 수치 실험을 수행하였다. CFD 수치실험의 결과는 수리실험 및 해석해 모델(CorJET)의 결과와 무차원화한 중심 궤적 및 희석율에 대해 비교 검증하였는데, 실제 수리실험의 결과와 잘 일치하는 것으로 나타났다. CFD 모델은 현재 근역 해석해 모델과 광역 준3차원 해수유동 모델이 가지고 있는 한계를 모두 보완할 수 있어 수중방류 온배수 영향해석에 적합한 모델이며, 본 연구를 통해 근역해석의 적합성을 확인하였으므로 향후 계산효율이 확보된다면 수중방류 온배수의 이동 및 확산 해석 도구로써 널리 활용될 것으로 기대된다.

• International Journal of Fluid Machinery and Systems
• /
• 제2권4호
• /
• pp.295-302
• /
• 2009

The flow in the draft tube cone of Francis turbines operated at partial discharge is a complex hydrodynamic phenomenon where an incoming steady axisymmetric swirling flow evolves into a three-dimensional unsteady flow field with precessing helical vortex (also called vortex rope) and associated pressure fluctuations. The paper addresses the following fundamental question: is it possible to compute the circumferentially averaged flow field induced by the precessing vortex rope by using an axisymmetric turbulent swirling flow model? In other words, instead of averaging the measured or computed 3D velocity and pressure fields we would like to solve directly the circumferentially averaged governing equations. As a result, one could use a 2D axi-symmetric model instead of the full 3D flow simulation, with huge savings in both computing time and resources. In order to answer this question we first compute the axisymmetric turbulent swirling flow using available solvers by introducing a stagnant region model (SRM), essentially enforcing a unidirectional circumferentially averaged meridian flow as suggested by the experimental data. Numerical results obtained with both models are compared against measured axial and circumferential velocity profiles, as well as for the vortex rope location. Although the circumferentially averaged flow field cannot capture the unsteadiness of the 3D flow, it can be reliably used for further stability analysis, as well as for assessing and optimizing various techniques to stabilize the swirling flow. In particular, the methodology presented and validated in this paper is particularly useful in optimizing the blade design in order to reduce the stagnant region extent, thus mitigating the vortex rope and expending the operating range for Francis turbines.

• Bulletin of the Korean Chemical Society
• /
• 제24권8호
• /
• pp.1097-1101
• /
• 2003

The cubic and quartic anharmonic force field of malonaldehyde is calculated using density functional theory at the B3LYP/6-31G(d,p) level, and used to simulate coherent infrared vibrational spectra. 12 normal modes are included in the simulation, and the Arnoldi method is employed for the diagonalization of the Hamiltonian. The calculated three pulse infrared signals in the k1 + k2 - k3 direction show signatures of the intramolecular hydrogen bond couplings between the C=O stretch, H-O-C bend and O-H stretch vibrations.

• Ocean Systems Engineering
• /
• 제6권4호
• /
• pp.325-344
• /
• 2016

Using 3D computational fluid dynamics techniques in recent years have shed significant light on the Vortex Induced Vibrations (VIV) encountered by deep-water marine risers. The fatigue damage accumulated due to these vibrations has posed a great concern to the offshore industry. This paper aims to present an algorithm to predict the crossflow and inline fatigue damage for very long (L/D > $10^3$) marine risers using a Finite-Analytical Navier-Stokes (FANS) technique coupled with a tensioned beam motion solver and rainflow counting fatigue module. Large Eddy Simulation (LES) method has been used to simulate the turbulence in the flow. An overset grid system is employed to mesh the riser geometry and the wake field around the riser. Risers from NDP (2003) and Miami (2006) experiments are used for simulation with uniform, linearly sheared and non-uniform (non-linearly sheared) current profiles. The simulation results including inline and crossflow motion, modal decomposition, spectral densities and fatigue damage rate are compared to the experimental data and useful conclusions are drawn.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권2호
• /
• pp.45-50
• /
• 2004

The field utilization factor (equation omitted) (the mean electric field / the maximum electric field) of standard sphere gaps was calculated by the charge simulation method, taking into account the ground plane and shanks. n changes mainly with g/r and slightly with 1$_1$, 1$_2$ and 1, where D=2r is the sphere diameter, g is the gap length, 1$_1$ and 1$_2$, respectively, are the lengths of the upper and lower shank, and t is the shank diameter. Generally, (equation omitted) increases as 1$_1$,1$_2$ and t each becomes larger. IEC standard 60052(2002) limits t$\leq$0.2D 1$_1$$\geq$1D and prescribes A=1$_2$＋D＋g where A is the height of the spark point on the upper sphere. Therefore, (equation omitted) is the largest when A=9D and the smallest when A=3D. The simple equation of a straight line, (equation omitted)=1- (g/3r), can generally be used as a representative value of (equation omitted) for a wide variety of sphere diameters that are permitted by the IEC standard. The maximum electric field E$_{m}$ at sparkover of standard air gaps has also been calculated by the relation E$_{m}$=V/(equation omitted)g). E$_{m}$ describes a U-curve for g/r, up to the sphere diameter of 1 m. Moreover, for 1.5-m and 2-m diameters and especially .for negative polarity, sparkover voltages have been calculated by integration of the ionization index.index.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.151-157
• /
• 2005

In the chemical, mineral and electronics industries, mechanically stirred tanks are widely used for complex liquid and particle mixing processes. In order to understand the complex phenomena that occur in such tanks, it is necessary to investigate flow field in the vessel. Most difficulty on the numerical analysis of stirred tank flow field focused particularly on free surface analysis. In order to decrease the dead zone and improve the flow efficiency of a system with free surface, this paper presents a new method that overcomes free surface effects by properly combining the benefits of using experiment and 3-D CFD. This method is applied to study the mixing flow in an agitated tank. From the results of experimental studies using the PIV (particle image velocimetry) system, the distribution of mixing flow including free surface are obtained. And these values that are expressed as a velocity vector field have been patched for simulating the free surface. The results of velocity distribution obtained by 3-D CFD are compared with those of experimental results. The experimental data and the simulation results are in good agreement.

• 천문학회보
• /
• 제37권1호
• /
• pp.67.1-67.1
• /
• 2012

Shocks are evolved when the relativistic jets in active galactic nuclei (AGNs), black hole binaries, supernova remnants (SNR) and gamma-ray bursts (GRBs) interact with the surrounding medium. The high energy particles are believed to be accelerated by the diffusive shock acceleration and the strong magnetic field is generated by Weibel instability in the shock. When ultrarelativistic electrons with strong magnetic field cool by the synchrotron emission, the radiation is observed in gamma-ray burst and the near-equipartitioned magnetic field in the external shock delays the afterglow emission. In this paper, we performed the 3D particle-in-cell (PIC) simulations to understand the characteristics of these relativistic shock and particle acceleration. Forward and reverse shocks are shaped while the unmagnetized injecting jet interacts with the unmagnetized ambient medium. Both upstream and downstream become thermalized and the particle accelerations are shown in each transition region of the shock structures.

• 한국안전학회지
• /
• 제10권2호
• /
• pp.56-63
• /
• 1995

A simulation of contaminant dispersion in a water reservoir has been done using 2-D finite difference method(FDM). The steady state velocity field of the reservoir was computed using stream function-vorticity formulation of Wavier-Stokes equation and continuity equation. Based on the computed steady state velocity field, the transient convective diffusion equation of the contaminant dispersion was computed. For the 1m$\times$1m reservoir model with inlet and outlet attached, it was shown that the center of circulation located toward right. For the numerical values of v =0.01($\textrm{cm}^2$/s) and D=0.6($\textrm{cm}^2$/s) and the flow of 50($\textrm{cm}^3$/s ), it was determined that the outflow had to be shut down in 18 seconds to prevent from severe pollution. Also the required time was computed to be 6 seconds for the inflow of 100 ($\textrm{cm}^3$/s). The result of this study is considered, hopefully, to be useful for the design of the water reservoir systems that are the subjects to various contamination.

• 한국음향학회지
• /
• 제20권6호
• /
• pp.94-103
• /
• 2001

수치해석 방법을 이용하여 실험으로 구한 머리전달함수 (Head Related Transfer Function: HRTF)를 컴퓨터 시뮬레이션으로 대치하고, 청취자의 머리 주변에서의 음장을 가시화하는 방법에 대해 다룬다. 본 논문에서는 경계요소법 (Boundary Element Method)과 무한요소법 (Infinite-Finite Element Method)의 두 가지 방법을 이용한다. 지금까지는 더미헤드 (Dummy-Head)등을 이용한 실험으로 머리전달함수를 구하였는데 이 실험에는 상당한 시간과 장비가 필요하다. 3차원 레이저스캐너를 이용하여 KEMAR 더미헤드의 형상을 측정하고 이것을 여러 다른 요소 수를 가지는 경계요소모델 및 무한요소모델로 변환하여 머리전달함수를 계산하고 모델의 요소 크기와 적용 가능한 주파수 대역과의 관계에 대해 분석한다. 측정을 통해 구한 머리전달함수와 비교하여 모델을 검증하고 음향학의 상반원리를 적용하여 머리전달함수의 데이터베이스를 구한다. 또한 몇 가지 가상음향 시스템에 대한 음장해석을 통해 주파수 및 시간영역에서의 음장을 가시화한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 E
• /
• pp.1893-1895
• /
• 1997

This paper presents an analysis of the electromagnetic field in the 3D microwave oven using computational method. The model is accounted the real shape, including the formings, input waveguide with the magnetron, tray, and so on. For quantisation of this problem, Galerkin method with the Nedelec's edge basic functions is used. The system of linear algebraic equations is solved by the iteration method. The simulation results were compared with the experimental results.