• Textile Coloration and Finishing
• /
• v.18 no.3 s.88
• /
• pp.42-48
• /
• 2006

The aim of this work is to develop Thick-Thin polyester yarn(T-T yarn) with finer than 1 denier mono filament. The manufacture of T-T yarns were carried out in a draw-winder using 85d/72f PET filament with various spinning speed of 2700, 2900, and 3100 m/min, respectively. The structure and physical properties of T-T yarns with spinning speed and over feed ratio were examined by draw-winder processing the sample in $100^{\circ}C$ water for 20 min and drying in 120, 140, 160, and $180^{\circ}C$ of dry air for 20 min. The crystallinity, the birefringence and the initial elasticity modulus of T-T yarns increased with increased spinning speed of filament and the heat treatment temperature but at the temperatures higher than $140^{\circ}C$ the increased rates show a tendency to decrease. Moreover, the initial modulus and the tenacity of T-T yarns increased with decreasing the over feed ratio of filament and the those of T-T yarns decreases with increasing the heat treatment temperature. The shrinkage of T-T yarns decreased with decreasing spinning speed and increased over feed ratio of filaments. Consequently, the results indicate that the best T-T yarn under 1 denier was optimized from PET filament with spinning speed of 2700 m/min and over feed ratio of 0.67

• Journal of the Ergonomics Society of Korea
• /
• v.21 no.2
• /
• pp.71-86
• /
• 2002

This study's purpose is to gain basic data for the factory automation of manufacturing custom-made girdles. For this study , obese women in their 30s and 40s was experimented through direct measuring and by the 3D scanner, by means of which the proportions of the subject's body was measured. Based upon the results of this experiment, individually designed girdles were made. In order to gain the basic data for the factory automation of manufacturing custom-made girdles, the patterns and the clothing pressure and the feeling of wearing such girdles were analyzed. This study can be summarized as follows: The material properties and the designs of existing functional girdles in the market were studied thoroughly, and the subject were required to wear those existing girdles. On the basis of this result, the experimental girdles were designed and produced which could serve well the subject's intension. The experimental girdles were of the basic long-type in order to apply to all sorts of girdles, and they were produced according to the style and pattern of the existing grading system. The second experiment was conducted by applying the subject's body measurements. Due to the elasticity of the material, in girdles the smaller measurements were to be used in this second experiment were: 80% of waist size, 84% of the hip and 85% of the thigh. To determine the length of the girdles, the same measurements were applied. The test results of the feeling of wearing the experimental girdles showed that the second, custom-made experimental girdles were better. According to the test results of the clothing pressure, the second experimental girdles(custom-made girdles) marked the higher pressure than the first on every part of the body, especially on the hips and thighs. Thus, it can be said that the second experimental girdles are better than the first in lifting up the hips. It is expected that the design methods developed in this study can be utilized as basic resources for the factory automation system of manufacturing custom-made girdles.

• Structural Engineering and Mechanics
• /
• v.74 no.2
• /
• pp.227-241
• /
• 2020

The bi-axial and shear buckling behavior of laminated hypar shells having rhombic planforms are studied for various boundary conditions using the present mathematical model. In the present mathematical model, the variation of transverse shear stresses is represented by a second-order function across the thickness and the cross curvature effect in hypar shells is also included via strain relations. The transverse shear stresses free condition at the shell top and bottom surfaces are also satisfied. In this mathematical model having a realistic second-order distribution of transverse shear strains across the thickness of the shell requires unknown parameters only at the reference plane. For generality in the present analysis, nine nodes curved isoparametric element is used. So far, there exists no solution for the bi-axial and shear buckling problem of laminated composite rhombic (skew) hypar shells. As no result is available for the present problem, the present model is compared with suitable published results (experimental, FEM, analytical and 3D elasticity) and then it is extended to analyze bi-axial and shear buckling of laminated composite rhombic hypar shells. A C⁰ finite element (FE) coding in FORTRAN is developed to generate many new results for different boundary conditions, skew angles, lamination schemes, etc. It is seen that the dimensionless buckling load of rhombic hypar increases with an increase in c/a ratio (curvature). Between symmetric and anti-symmetric laminations, the symmetric laminates have a relatively higher value of dimensionless buckling load. The dimensionless buckling load of the hypar shell increases with an increase in skew angle.

• Computers and Concrete
• /
• v.20 no.4
• /
• pp.391-407
• /
• 2017

Fiber reinforced polymer (FRP) bars have been recently used to reinforce concrete members in flexure due to their high tensile strength and especially in corrosive environments to improve the durability of concrete structures. However, FRPs have a low modulus of elasticity and a linear elastic behavior up to rupture, thus reinforced concrete (RC) components with such materials would exhibit a less ductility in comparison with steel reinforcement at the similar members. There were several studies showed the behavior of concrete beams with the hybrid combination of steel and FRP longitudinal reinforcement by adopting the experimental and numerical programs. The current study presents a numerical and analytical investigation based on the data of previous researches. Three-dimensional (3D) finite element (FE) models of beams by using ANSYS are built and investigated. In addition, this study also discusses on the design methods for hybrid FRP-steel beams in terms of ultimate moment capacity, load-deflection response, crack width, and ductility. The effects of the reinforcement ratio, concrete compressive strength, arrangement of reinforcement, and the length of FRP bars on the mechanical performance of hybrid beams are considered as a parametric study by means of FE method. The results obtained from this study are compared and verified with the experimental and numerical data of the literature. This study provides insight into the mechanical performances of hybrid FRP-steel RC beams, builds the reliable FE models which can be used to predict the structural behavior of hybrid RC beams, offers a rational design method together with an useful database to evaluate the ductility for concrete beams with the combination of FRP and steel reinforcement, and motivates the further development in the future research by applying parametric study.

• Journal of Biosystems Engineering
• /
• v.17 no.2
• /
• pp.156-170
• /
• 1992

The force-deformation relationship gives the basic physical properties of the fruits such as the bioyield point, the rupture point, and the deformations at the bioyield point and the rupture point. These informations are very important to study the stress-strain relationships of the fruits. This study was conducted to analyze those physical properties according to the sampling position of the fruits, and to determine the bioyield point, the rupture point, and the deformations at the bioyield point and the rupture point of the fruits for two different storage conditions(low temperature and normal temperature) and the storage period, and to investigate the effect of loading rate on those physical properties, the hysteresis on the loading-unloading condition and the degree of elasticity of the fruits. The results of the study were as follows : 1. The physical properties(BS, US, BD, and RD) of the test specimen selected from the different sampling positions were quite different. The values of the physical properties were shown smallest ones at the cheek of the fruits, and the statistical test results of the physical properties between the cheek from the other two positions of the fruits showed that there were significant difference at the 1 % level between them. 2. The effect of loading rate on the physical properties of the fruits was relatively large, all the considered physical propertis of the fruits increased with the loading rate, but the hysteresis loss decreased with it. 3. The physical properties of the fruits according to the storage conditions and period showed different, and the bioyield deformation and the rupture deformation of the fruits increased with the storage period, but the bioyield strength and the ultimate strength of the fruits decreased with it. The effect of the storage conditions on the those physical properties showed that the normal temperature storage condition was a little higher than the low temperature storage condition. 4. As a whole, it was shown that the bioyield strength and the ultimate strength of the pear decreased a little faster than those of the apple, and the bioyield deformation and rupture deformation of the pear increased a little faster than those of apple at the two storage conditions.

• Resources Recycling
• /
• v.4 no.1
• /
• pp.4-11
• /
• 1995

The amounts of waste stone and stone powder sludge that occurred in the quarry and processing plant of s stone plates, have been increased with the development of stone industry. The manufactunng process of 따tificial s stone was studied to reduce the outlet of these wastes and utilIze them as raw materials for architecture, interior decoration and art work. In order to compare the properties of artiflcial stone with those of natural building-stone, the physi$\alpha$II properties of artificial stone such as specific gravity, absorption ratio, elastic wave velocity, compressive s strength, tensile strength, shore hardness, elasticity and Poission's ratio were measured. From the mesaured d data of physical properties, it was found that physical propertIes of artificial stone were controlled by homogeneous m mixing ratio of constituents, molding pressure, and amount of binder. Also, from the thermo-gravimetric analysis, it was found that artIfIcial stone manufactured had a good thermal stability up to $300^{\circ}C$. It was concluded that t the optimum conditions for manufacturing process of artificial stone were $200kg/\textrm{cm}^2$ of molding pressure, 12-15 w weight % of binder amounts.

• Polymer(Korea)
• /
• v.34 no.3
• /
• pp.253-260
• /
• 2010

In this study, we prepared and evaluated a series of biocompatible and biodegradable block copolymer hydrogels with a delayed swelling property for tissue expander application. The hydrogels were synthesized via a radical crosslinking reaction of poly(ethylene glycol) (PEG) diacrylate and poly(D,L-lactide-co-glycolide)-poly(ethylene glycol)-poly(D,L-lactide-co-glycolide)(PLGA-PEG-PLGA) triblock copolymer diacrylate as a swelling/degradation controller (SDC). For the synthesis of various SDCs that can lead to different degradation and swelling properties, various PLGA-PEG-PLGA triblock copolymers with different LA/GA ratios and different PLGA block lengths were synthesized and modified to have terminal acrylate groups. The resultant hydrogels were flexible and elastic even in the dry state. The in vitro degradation tests showed that the delayed swelling properties of the hydrogels could be modulated by varying the chemical composition of the biodegradable crosslinker (SDC) and the block ratio of SDC/PEG. The histopathologic observation after implantation of hydrogels in mice was performed and evaluated by macrography and microscopy. Any significant inflammation or necrosis was not observed in the implanted tissues. Due to their biocompatibility, elasticity, sufficient swelling pressure, delayed swelling and controllable degradability, the hydrogels could be useful for tissue expansion and other biomedical applications.

• Applied Biological Chemistry
• /
• v.37 no.1
• /
• pp.19-24
• /
• 1994

Eight varieties of soybeans grown in Korea were investigated to compare chemical composition, protein dispersibility index (PDI) and some properties of soybean sprouts and tofu. The range of protein contents was $37.80{\sim}40.43%$ where the Kyungdong 3 was the highest and Suwon 157 was the lowest, while the Bokwang was the lowest in lipid contents. The range of PDI was $71.6{\sim}95.3%$ where the Kyungdong 3 was the highest and Suwon 162 was the lowest. The Kyungdong 3, Suwon 160 and Suwon 162 were significantly fast in growth rate of soybean sprout roots and the 100% of germination. The Kyungdong 3 was the highest in tofu yield and Suwon 146 was the highest in hardness. The organoleptic properties of tofu showed that $L{\times}2.3$ and Suwon 162 was relatively high in cooked beany odor, while the Suwon 146 were the highest in elasticity and hardness. Even though Kyungdong 3 was found as the best for tofu and soybean sprouts processing, the black color of seed coat affected negatively on tofu color.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.1D
• /
• pp.91-98
• /
• 2011

Recently, the usage of elastic paving using EPDM Chip instead of pedestrian sidewalk blocks or permeable concrete used mostly for pedestrian walk, trails and in parks has been increassed as it can absorb impact during walking and produce wide range of colors and designs. However, the properties of EPDM Chip including elasticity and durability are decreased when exposed to ultraviolet ray and scenic paving functions through various colors are lowered due to the yellowing phenomenon. In this study, ultraviolet ray accelerated weathering test has been conducted to analyze the color changes in EPDM Chip and polyurethane resin, which are the main ingredients of elastic paving, when exposed to ultraviolet ray. The color differences are quantitatively analyzed through the color value coordination of the colored space by using the color difference scheme. The experimental results show that the color changes in BL polyurethane resin which is used most frequently at present was larger than that of EPDM Chip. Moreover, the total color difference, ${\Delta}E$, of BC polyurethane resin are 3.162 on the $14^{th}$ day of commencement of acceleration, which is 6 times greater color change resistance against ultraviolet ray than that of BL polyurethane resin with total color difference of 20.639. Therefore, the usage of BC polyurethane resin, which is manufactured to have chain-type molecular structure by using the isocyanate as the HMDI at the time of producing polymer, as binder in elastic paving with EPDM Chip is found to be a highly efficient method of restraining the color changes due to the ultraviolet ray.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.1
• /
• pp.30-40
• /
• 2016

This study related to get skin improvement effect of sheet mask pack using 5% of $2^{nd}$ fermented snail extract. To the scientific study of the skin, it was used for this sheet mask of 100% cotton as cutting face shape. We reported the results of measurement of skin improvement effect with the placebo and Gene-SEM (general snail extract mask). First; moisturizing effect of 2F-SEM ($2^{nd}$ fermented snail extract mask) has been increased about 11% than the PM and Gene-SEM was improved about 4.7% more than the PM (placebo mask). Second; elasticity of the mask pack containing $2^{nd}$ fermented snail extract was 13.8% better than PM and Gene-SEM was improved about 6.7 % more than PM. Third; Skin roughness of 2F-SEM has improved 6.80% than PM and Gene-SEM was improved about 2.3% more than PM. Fourth; melanin reductive effect of 2F-SEM was improved about15.0% more than PM and Gene-SEM was improved about 8.7% more than PM. Fifth; fine wrinkle decline effect of 2F-SEM was about 8.0% better than PM and Gene-SEM was improved with 5.1% more than PM. Sixth; sensorial evaluation of 2F-SEM using $2^{nd}$ fermented snail extract was significantly showed difference merits regarding softness, moisture, fine-wrinkle improvement.