• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.9 no.3
• /
• pp.215-221
• /
• 1976

In this study, noise arresting effect of the noise control room from the transmission of surrounding noise was tested when the packing noise control rooms were set up in the test room in which the prerecorded noise from an engine room was reradiated at the same level as the original pressure. The inner space of control room A is $3.389m^3(1.19\times1.19\times2.14m)$ having walls furnished with plywood board 9mm in thickness and noise control room door$(60\times45cm) $ and illumination lamp are placed. In case of the control room B, noise absorption board(10mm fiber board which holds the corntype concavity with diameter of 5mm, depth 5mm, space 15mm) is adhered to the internal ceiling and styrol foam boards(20mm) to the walls. The other struction is same as the control room A. Type C is the same as B except wool board(Glass Fiber, 33mm) on the walls. Type D is same as type A except that the thickness of wall is 12mm and wood pyramid type cone$(5\times5\times13cm)$ is adhered to the ceiling ana walls(Fig. 1). When the recorded noise and vibrated noise were controlled in various levels. The noise pressure which passed through the control rooms was measured by sound level meter(Bruel & Kjar 2205, measuring range 37-140dB). In order to calculate the absorption rate in the control rooms the noise pressure was measured at different distances when the recorded noise pressure was radiated. The followings are the results obtained from the experiment. 1. When the noise pressure of the test room was 60dB, transmission rate of type A was $69.7\%$ and increased $3.3\%$ per 10dB. At the same condition, the rate was $53.9\%$ and increased $4.5\%$ per 10dB in type D. Type D was the most effective in noise arresting of the four and the effect was D,C,B and A in order(Fig.2). 2. When the oscillator sound and vessels noise were radiated in 1,000Hz, at one meter distance to the type A and D, the oscillator sound pressure were 77dB and 73dB, while the vessels noise pressure were 73.3dB and 66.2dB respectivley(Fig.3). 3. Refering to the influence of the frequency to the lower oscillator sound(1,000Hz) pressure, both type C and D were almost same at 140cm but type C was 0.3dB lower than type D at 20cm distance(Fig.4).

• Biomolecules & Therapeutics
• /
• v.12 no.2
• /
• pp.114-121
• /
• 2004

This study was undertaken to evaluate the general pharmacological properties of CJ-11828, an amlodipine adipate, in experimental animals and in vitro system. CJ-11828 had no effects on general behavior, motor coordination, writhing syndromes, pentetrazol-induced chemoshock and electric shock in mice at dose levels of 3,10, anti 30 mg/kg, po. But there were decrease of body temperature, prolongation of sleeping time, and inhibition of intestinal activity in mice treated with CJ-11828 at doses of 10 and 30 mg/kg, po. CJ-11828 decreased the blood pressure in coscuous fog at the dose level of 2mg/kg, po, but it was expected as a result of pharmacological activity of CJ-11828. Any effect on respiratory system was not observed in conscious rat at doses of 3,10, and 30 mg/kg, po. The slight decrease in spontaneous motor activity was observed in mice treated with CJ-11828 at high dose, 30 mg/kg. In vitro experiments, CJ-11828 had no effect on agonists-induced contraction of isolated guinea pig ileum at 0.1, 1, and 10 ${\mu}$M. Based on these results, it was concluded that CJ-11828 had no pharmacological effect ill these studies even up to the 36-fold anticipated clinical dose, 3 mg/kg.

• Asia-Pacific Journal of Business
• /
• v.12 no.3
• /
• pp.281-294
• /
• 2021

Purpose - The purpose of this study was verifying the policy effects by field of innovative growth engines, focusing on the discussion of the relationship between government support and corporate R&D activities (substitute/complementary goods), and based on the results, policy recommendations for promoting private R&D were carried out. Design/methodology/approach - Through literature research, academic/theoretical discussions about relationship between government support and corporate R&D activities were synthesized. Next, survey data were collected for companies engaged in the field of innovative growth engines and empirical analysis was conducted on the relationship between government support and R&D activities in 13 major sectors. Findings - First, as a result of analyzing all companies regardless of sector, government R&D subsidies had a positive (+) relationship with R&D activities of companies engaged in innovative growth engines, that is, a complementary relationship. Next, as a result of performing empirical analysis by dividing the 13 fields, it was found that 9 fields were complementary goods in which government support had a positive (+) effect on the R&D activities of companies. On the other hand, in the remaining four fields, the effect of government support on corporate R&D activities was not statistically significant. Research implications or Originality - In order to promote R&D activities of companies in the 9 fields where government support acts as a complementary product, it is necessary to establish policies centered on direct government support. On the other hand, it would be more desirable to seek indirect support rather than direct support in the 4 fields where government support did not have a statistically significant effect on corporate R&D activities.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.7
• /
• pp.1279-1284
• /
• 2008

In this paper, utilizing a haptic display for 3D modeling practice is proposed. A haptic display called PHANTOM Omni providing 3D position as well as touch feeling is used to investigate how effectively the proposed practice works compared to the conventional ones for 3D modeling. Experimental results showed the proposed practice can provide positive effect for 3D modeling: improving the task completion time and lowering task workload, thus increasing the usability.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1363-1366
• /
• 2009

A new recognition method is used to find the three-dimensional target object on integral imaging. For finding the location of a target image, amount of reconstructed reference image is needed. This method is giving accurate information of target image by correlated among reconstructed target images and reference images.

• The Plant Pathology Journal
• /
• v.18 no.5
• /
• pp.271-278
• /
• 2002

The effect of five plant population densities [5 (D$_1$), 10 (D$_2$), 20 (D$_3$), 30 (D$_4$), and 40 (D$_{5}$) plants/m$^2$] of four groundnut cultivars [ICGV 86699, ICG (FDRS) 10, ICGS 11 and TMV 2] and fungicide application (Kavach, chlorothalonil) to manage late leaf spot (LLS) and rust were studied in a field experiment during the 1995 and 1996 rainy seasons. LLS and rust severities were low in fungicide sprayed plots in all the cultivars irrespective of plant densities. Severities of LLS and rust, and percentage defoliation caused by LLS were significantly more in higher plant densities (D$_4$, D$_{5}$) than in lower plant densities (D$_1$, D$_2$, D$_3$) in fungicide sprayed and unsprayed plots in all the cultivars. All the cultivars gave significantly higher haulm and pod yields in fungicide sprayed plots than in unsprayed plots. Haulm and pod yields were significantly higher in higher plant densities than in lower plant densities. A combination of higher plant densities (D$_4$, D$_{5}$) and fungicide protection against LLS and rust gave maximum yield.yield.

• Asian Journal of Turfgrass Science
• /
• v.10 no.3
• /
• pp.187-194
• /
• 1996

Dictyostelid cellular slime molds were isolated from soils and harks of the subtropical forest of Torreya nucifera in Cheju island. The results were as follows: Polysphondylium pallidum,Dictyostelium purpureum, D. mucoroides, D. aureo-stipes var. aureo-stipes, D. flavidum, D. miniutum, P.violaceu m, D. monocrhasioides. D. brefeldianum, D. polvcephalum. D. areum var. areum, P. tenuissimum, D. fasciculatum. In this forest, P. pallidum and D. purpureum were occurred dominantly, and D. mucoroides and D. aureo-stipes var, aureo-stipes were the second dominant. It was distinguished that D. purpureum was much more cornmonly found than the other forests. Cellular slime molds from the barks of the tree heights of 1,3 and 5m were occured 7, 3 and 2 species respectively. Torreya fruit extract affected on the growth of D. aureo-stipes var. aureo-stipes and D. flavidum but not on D. purpureum and D. mucoroides. Key words: Cellular slime mold, Torreya forest, Torreya fruit extract.

• Korean Journal of Pharmacognosy
• /
• v.38 no.4
• /
• pp.376-381
• /
• 2007

Seven compounds were isolated from the MeOH extract of the seeds of Plantago asiatica L. and their structures were identified as ${\beta}-sitosterol$ (1), (24R)-6${\beta}$-hydroxy-24-ethyl-cholest-4-en-3-one (2), acteoside (3), geniposidic acid (4), 1-octen-3-ol 3-O-${\beta}$-D-xylopyranosyl$(1{\rightarrow}6)-{\beta}-D-glucopyranoside$ (5), plantainoside D (6) and plantamajoside (7) on the spectroscopic analysis. Among them, $(24R)-6{\beta}$-hydroxy-24-ethyl-cholest-4-en-3-one (2) and 1-octen-3-ol 3-O-${\beta}$-D-xylopyranosyl ($1{\rightarrow}6)-{\beta}-D-glucopyranoside$ (5) were first isolated from this plant. Among them, geniposidic acid (4) showed the most potent inhibitory effect on melanogenesis, with inhibition rate of 41%.

• International Journal of Advanced Culture Technology
• /
• v.10 no.3
• /
• pp.339-345
• /
• 2022

In this paper, the effect of porosity on the acoustic phase velocity of the 3D printed Kelvin closed-cell structure was investigated using the spectral phase analysis. Since Kelvin cells bring about the large amount of scattering, acoustic pulses in ultrasonic measurements undergoes a distortion of waveforms due to the dispersion effect. In order to take account on the dispersion, mathematical expressions for calculating the phase velocity of longitudinal waves propagating normal to the plane of the Kelvin structure are suggested by introducing a complex wave number based on Fourier transform. 3D Kelvin structure composed of identical unit-cells, a polyhedron of 14 faces with 6 quadrilateral and 8 hexagonal faces, was developed and fabricated by 3D CAD and 3D printer to represent the micro-structure of porous materials such as aluminum foam and cancellous bone. Total nine samples of 3D Kelvin structure with different porosity were made by changing the thickness of polyhedron. Ultrasonic pulse of 1MHz center frequency was applied to the Kelvin structures for the measurement of the phase velocity of ultrasound using the TOF(time-of-flight) and the phase spectral method. From the experimental results, it was found that the acoustic phase velocity decreased linearly with the porosity.

• Earthquakes and Structures
• /
• v.11 no.2
• /
• pp.217-243
• /
• 2016

The linear and nonlinear seismic responses of steel buildings with perimeter moment resisting frames and welded connections (WC) are estimated and compared with those of buildings with post-tensioned connections (PC). Two-dimensional (2D) and three-dimensional (3D) structural representations of the buildings as well as global and local response parameters are considered. The seismic responses and structural damage of steel buildings with PC may be significantly smaller than those of the buildings with typical WC. The reasons for this are that the PC buildings dissipate more hysteretic energy and attract smaller inertia forces. The response reduction is larger for global than for local response parameters. The reduction may significantly vary from one structural representation to another. One of the main reasons for this is that the energy dissipation characteristics are quite different for the 2D and 3D models. In addition, in the case of the 3D models, the contribution of each horizontal component to the axial load on an specific column may be in phase each other during some intervals of time, but for some others they may be out of phase. It is not possible to observe this effect on the 2D structural formulation. The implication of this is that 3D structural representation should be used while estimating the effect of the PC on the structural response. Thus, steel frames with post-tensioned bolted connections are a viable option in high seismicity areas due to the fact that brittle failure is prevented and also because of their reduced response and self-centering capacity.