• Journal of Industrial and Engineering Chemistry
• /
• 제67권
• /
• pp.388-395
• /
• 2018

Significant efforts have been applied toward fabricating three-dimensional (3D) scaffolds using 3D-bioprinting tissue engineering techniques. Gelatin has been used in 3D-bioprinting to produce designed 3D scaffolds; however, gelatin has a poor printability and is not useful for fabricating desired 3D scaffolds using 3D-bioprinting. In this study, we fabricated pore size controlled 3D gelatin scaffolds with two step 3D-bioprinting approach: a low-temperature ($-10^{\circ}C$) freezing step and a crosslinking process. The scaffold was crosslinked with 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide hydrochloride (EDC) and N-hydroxysuccinimide (NHS). The pore sizes of the produced 3D gelatin scaffolds were approximately 30% smaller than the sizes of the designed pore sizes. The surface morphologies and pore sizes of the 3D gelatin scaffolds were confirmed and measured using scanning electron microscopy (SEM). Human dermal fibroblasts (HDFs) were cultured on a 3D gelatin scaffold to evaluate the effect of the 3D gelatin scaffold pore size on the cell proliferation. After 14 days of culture, HDFs proliferation throughout the 3D gelatin scaffolds prepared with more than $580{\mu}m$ pore size was approximately 14% higher than proliferation throughout the 3D gelatin scaffold prepared with a $435{\mu}m$ pore size. These results suggested that control over the 3D gelatin scaffold pore size is important for tissue engineering scaffolds.

• 한국자원식물학회지
• /
• 제8권2호
• /
• pp.153-157
• /
• 1995

초피(椒皮)나무(Zanthoxylum piperitum DC.)의 embryogenic callus로부터 부정배발생(不定胚發生)에 있어 $NH_4NO_3,\;KNO_3$와 casein hydrolysate의 첨가(添加) 효과(效果)를 알아 보기위하여 본(本) 실험(實驗)을 실시(實施)하였던 바 그 결과(結果)는 다음과 같다. 1. 2,4-D 0.1mg/1가 첨가(添加)된 MT배지(培地)에 $NH_4NO_3$를 3300mg/1 첨가(添加)시킨 배지(培地)에서 부정배발생(不定胚發生)이 가장 양호(良好)하였다. 2. $KNO_3$를 3800mg/1 첨가(添加) 시킨 경우(境遇)에는 MT 기본배지(基本培地)와 2,4-D 0.1mg/1를 첨가(添加)시킨 배지(培地)에서 비교적(比較的) 양호(良好)한 부정배(不定胚)를 발생(發生)시키었다. 3. 2,4-D 0.1mg/1가 첨가(添加)된 MT 배지(培地)에 casein hydrolysate를 700mg/1 첨가(添加)시킨 경우(境遇)에 부정배(不定培) 발생(發生)이 양호(良好)하였으며 2,4-D가 첨가(添加)되지 않는 배지(培地)에서는 부정배(不定培) 발생(發生)이 저조(低調)하였다.

• 방송공학회논문지
• /
• 제17권6호
• /
• pp.1004-1013
• /
• 2012

3D 영상 산업의 활성화와 함께 3D 영상이 적용됨으로써 유망한 산업 분야 중 하나가 게임이다. 2D에서 3D 그래픽으로 그리고 현재는 3D 입체영상으로 진화하면서 이용자에게 깊이감을 제공함으로써 더 큰 즐거움을 주고 있다. 그러나 우리나라 18세 이상 성인 중절반이 안경 또는 콘택트렌즈를 착용하고 있을 정도로 안경 착용자가 많은 환경에서 3D 영상을 즐기기 위해서 또 다른 안경인 3D 안경을 착용해야 하는 것은 큰 불편이 아닐 수 없다. 본 연구에서는 게임에서의 입체영상 및 안경 착용여부가 영상의 특성, 프레즌스 그리고 피로도 등에 어떠한 영향을 미치는지 알아보고자 했으며, 실험결과 디스플레이와 안경착용의 상호작용효과는 프레즌스 구성요소 중 시간관여에서 유의미하게 나타났다. 2D 영상에서는 안경 착용자가 높은 반면 3D 입체영상에서는 안경 비착용자가 높게 인지하였다. 그리고 인지된 특성과 피로도 변인에서는 영상 여부의 주효과에서만 유의미한 것으로 나타났다. 인지된 특성 구성요소 중 선명도에서는 3D 입체영상 보다 2D 영상의 화질이 좋다고 평가하였으며, 피로도는 2D 영상 보다는 3D 입체영상에서 높은 것으로 나타났다.

• 기술혁신연구
• /
• 제14권3호
• /
• pp.43-69
• /
• 2006

In this study, we examine the effect of TRIPS on the relationship between R&D expenditures and patent applications in manufacturing firms. The first set of tests examines the association between patent applications and R&D expenditures and firm specific factors such as firm size and capital intensity. The next set of tests adds environmental factors including R&D intensity of the industry and development of TRIPS. We divide the sample period into three subperiods according to the progress of TRIPS subperiod 1(1984-1988) before TRIPS, subperiod 2(1989-1994) after negotiation of TRIPS and subperiod 3(1995-2000) after agreement on TRIPS. Regression model reveals that the coefficient on firm size is significantly positive over the all sample Period, while that of R&D expenditures of R&D intensive firms is significantly positive in subperiod 2 and 3(1989-2000) and that of capital intensity is significantly negative only in subperiod 3(1995-2000). The findings suggest that the efficient intellectual property system promotes the patent application of R&D intensive firms.

• 대한간호학회지
• /
• 제32권5호
• /
• pp.727-734
• /
• 2002

This study was to determine the effect of DHEA administration before, during, and after dexamethasone treatment on body weight and TypeI,II muscle weight of rat receiving dexamethasone treatment. Method: Wistar rats were divided into 6 groups: control(C), dexamethasone(D), DHEA administration for 3days after dexamethasone treatment for 7days(7D+3DH), dexamethasone treatment for 7days after DHEA administration for 3days(3DH+7D), DHEA administration during dexamethasone treatment for 4days after dexamethasone treatment for 3days(3D+4DDH), DHEA administration during dexamethasone treatment for 7days(7DDH). Dexamethasone was injected by subcutaneously daily at a dose of 5mg/kg. DHEA was orally administered daily at a dose of 5mg/kg for 7 days. Soleus(TypeI) muscle, and both plantaris and gastro- cnemius(TypeII) muscles were dissected on the 7th day of experiment. Result: Body weight of both 3DH+7D group and 3D+4DDH group increased significantly compared with that of 7D group. Body weight of 7D+3DH group decreased significantly compared with that of 7D group, 7DDH group, 3DH+7D group and 3D+4DDH group. Muscle weight of both plantaris and gastro- cnemius tended to decrease compared with that of 7D group. Muscle weight of 7DDH group, 3D+4DDH group and 3DH+7D group increased significantly compared with that of 7D+3DH group. Muscle weight of gastrocnemius of both 3DH+7D group and 3D+4DDH group increased significantly compared with that of 7D group. Conclusion: Based on these results, it can be suggested that DHEA administration before and during dexamethasone treatment can increase both body weight and mass of atrophied TypeII muscle induced by dexa- methasone treatment.

• 한국콘텐츠학회논문지
• /
• 제18권1호
• /
• pp.665-672
• /
• 2018

본 연구의 목적은 기존 스톱 모션 애니메이션의 문제점을 파악하고 이를 해결하기 위한 방안으로서 최신의 기술이 적용된 3D프린터 기술과 컴퓨터 특수효과 기술을 적용한 사례를 분석하였다. 이를 위해 스톱모션 애니메이션의 역사를 고찰하고 기술이 어떻게 스톱 모션 애니메이션에 적용 되었는지 선행 연구를 통해 확인하였다. 그 결과, 표현적 측면에서 최근 개봉한 <유령신부>와 <코렐라인>처럼 3D 프린터를 활용하여 클레이나 천으로 한정된 기존의 스톱 모션 애니메이션의 한계를 극복하였다. 더 나아가 스톱 모션 애니메이션의 가장 큰 한계인 자연현상은 컴퓨터 특수효과처리를 통해 오히려 스톱 모션 애니메이션만의 독특한 작품을 연출 할 수 있었다. 그래서 스톱 모션 애니메이션에서 3D 프린터 기술과 컴퓨터 특수효과기술에 대한 수용으로 무한한 상상과 독창적 표현이 가능해 졌다. 최근 기술 기반 스톱 모션 애니메이션은 향후 애니메이션 분야의 지속적으로 발전하는데 그 기초를 제공 할 것으로 기대한다.

• 전기학회논문지
• /
• 제57권12호
• /
• pp.2194-2198
• /
• 2008

In this paper, the construction of secondary reaction plate is analyzed by 3-D Finite Element Method(3-D FEM) to consider the influence of its variation on the transverse edge effect of LIM. The effective 3-D analysis model for considering the transverse edge effect caused by the finite widths of the primary and the secondary is proposed. The simple method measuring the transverse edge effect by using the patterns of currents induced in the secondary reaction plate is also proposed. With this effective analysis method, various models of secondary reaction plate with overhang and cap has been analyzed to consider the relationship between the construction of secondary reaction plate and the transverse edge effect of LIM.

• 패션비즈니스
• /
• 제16권6호
• /
• pp.36-51
• /
• 2012

Quilting, a technique to join two or more layers of fabrics, has long been used in the textile and fashion sectors. To evaluate dimensional effect of quilting that changes according to the characteristics of fabrics, 3D scanning method is employed in this study. Goal of this study is to interpret how fabric's composition, stiffness, thickness, and weight affect the appearance when quilted fabrics are used in a garment. Surface reconstruction method based on 3D scanning is used as a research method to evaluate the changing appearance depending on the material properties quantitatively with the quilting method. Besides, exemplary virtual clothing is realized through a virtual quilting method in 3D digital clothing system based on the properties of fabrics.

• 지구물리와물리탐사
• /
• 제11권3호
• /
• pp.214-220
• /
• 2008

점토질의 중심코어부에 차수 역할을 의존하는 형식의 제체에 대한 안정성 검토에 자주 적용되는 B차원 전기비저항 탐사자료의 해석 시, 제체의 심벽 구조와 수위에 따른 왜곡 양상을 모델링을 통해 검증하였다. 3차원 구조인 제체의 해석을 주로 2차원으로 수행하는 과정에서 다양한 왜곡효과가 나타났다. 제체의 재료가 수평적으로 균질한 상태에서 수위와 연관지어 분석한 결과, 양안부보다는 제체 중앙부가 비저항 단면에서 수위선을 비교적 정확히 나타내며, 양안에 존재하는 지반 등 3차원 효과로 인해 양안부로 다가가면 수위선이 깊어지는 반응을 보였다. 또한 제체의 가장 외부구조인 채움재부의 경사가 일정할 때, 코어부의 경사가 급할수록 실제 수위와 비슷한 효과를 보였다. 코어부의 경사가 비슷할 때는, 외부 채움재부의 경사가 완만할수록 실제 수위와 비슷한 효과를 보였으며, 양안에서의 3차원 효과도 덜 나타났다. 채움재부의 경사가 급하면 2차원 역산 결과, 실제수위보다 더 깊은 위치에서 수위와 관련된 저비저항대를 지시하였으며, 양안에서의 3차원 효과가 크게 나타났다.

• 한국의상디자인학회지
• /
• 제21권3호
• /
• pp.93-108
• /
• 2019

This study analyzed the influence of experiential marketing factors of 3D printing and Internet services on technology acceptance factors and usage intention. Furthermore, we analyzed how the user's innovativeness shows the effect on the intention to use. Data acquired from a total of 518 college students was used for the final analysis, which was perfromed by SPSS 21.0 and AMOS 23.0 programs. The results of this study are as follows. We analyzed the influence of the experiential marketing factors of fashion service utilizing the 3D printing and the Internet of Things on the acceptance of technology and intention to use these technologies. As for 3D printing, first, sensory and behavioral factors are positively related to the acceptance of technology. Second, emotional and cognitive factors have negative effects on all technology acceptance. Third, relational factors did not show a significant influence on several conditions of technology acceptance. Fourth, the effects of technology acceptance on the willingness to use have a positive effect on several conditions factors, except the effort expectation. As for the result concerning the Internet of Things first, behavioral factors have a positive effect on all technology acceptance. Second, emotional factors have a negative effect on all technology acceptance. Third, cognitive factors did not have a significant effect on various conditions and showed negative effects on several factors. Fourth, sensory and relational factors did not affect the acceptance of technology. Fifth, the effects of technology acceptance on the intention to use are affected by several conditions, except for effort expectation. As a result of analyzing the moderating effects of user's innovativeness on the willingness to use, 3D printing did not show any significant effect on innovation. However, the Internet of Things has a significant influence on the user acceptance of technology acceptance.