• 한국정밀공학회지
• /
• 제25권7호
• /
• pp.7-12
• /
• 2008

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• 제18권3호
• /
• pp.197-201
• /
• 2015

Complete colonic duplication is a very rare congenital anomaly that may have different presentations according to its location and size. Complete colonic duplication can occur in about 15% of all gastrointestinal duplications. Double termination of tubular colonic duplication in the perineum is even more uncommon. We present a case of a Y-shaped tubular colonic duplication which presented with a rectovestibular fistula and a normal anus. Radiological evaluation and initial exploration for sigmoidostomy revealed duplicated colons with a common vascular supply. Endorectal mucosal resection of theduplicated distal segment till the colostomy site with division of the septum of the proximal segment and colostomy closure proved curative without compromise of the continence mechanism. Tubular colonic duplication should always be ruled out when a diagnosis of perineal canal is considered in cases of vestibular fistula alongwith a normal anus.

• 한국정밀공학회지
• /
• 제23권4호
• /
• pp.183-190
• /
• 2006

Digital 3D Real Object Duplication System (RODS) consists of 3D Scanner and Solid Freeform Fabrication System (SFFS). It is a device to make three-dimensional objects directly from the drawing or the scanning data. In this research, we developed an office type SFFS based on Three Dimensional Printing Process and an industrial SFFS using Dual Laser. An office type SFFS applied sliding mode control with sliding perturbation observer (SMCSPO) algorithm for control of this system. And we measured process variables about droplet diameter measurement and powder bed formation etc. through experiments. In case of industrial type SFFS, in order to develop more elaborate and speedy system for large objects than existing SLS process, this study applies a new Selective Dual-Laser Sintering (SDLS) process and 3-axis Dynamic Focusing Scanner for scanning large area instead of the existing f lens. In this process, the temperature has a great influence on sintering of the polymer. Also the laser parameters are considered like that laser beam power, scan speed, and scan spacing. Now, this study is in progress to evaluate the effect of experimental parameters on the sintering process.

• 정보처리학회논문지A
• /
• 제14A권3호
• /
• pp.133-140
• /
• 2007

SWBF(shrink-wrapped boundary face) 알고리즘은 조직되지 않은 3차원 측정점으로부터 표면을 재구성하기 위해 최근에 제안된 방법이다. 본 논문에서는 SWBF 알고리즘의 표면 중복문제를 제기하고, 이를 해결하기 위한 개선된 표면 재구성 방법을 제안한다. 제안된 방법은 경계셀이 아닌 모든 셀들을 내부셀과 외부셀로 구분하고, 개선된 경계면의 정의를 이용해 초기메쉬에서 표면의 중복이 발생하지 않도록 하였다. 또한, 측정 방향에 따라 표면 샘플링의 조밀도가 차이가 나는 일반적인 3차원 스캐너로부터 추출된 데이터의 처리를 위해 셀 영상에서 2차원 연결성을 정의하여 사용하였다. 실험을 통해 제안된 방법이 SWBF 알고리즘의 표면중복문제를 극복하는데 매우 유용함을 알 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.732-737
• /
• 2005

Distal 3D Real Object Duplication System(RODS) consists of 3D Scanner and Solid Freeform Fabrication System(SFFS). It is a device to make three-dimensional objects directly from the drawing or the scanning data. In this research, we developed an office type SFFS based on Three Dimensional Printing Process and a industrial SFFS using Dual Laser. An office type SFFS applied sliding mode control with sliding perturbation observer(SMCSPO) algorithm for control of this system. And we measured process variables about droplet diameter measurement and powder bed formation etc. through experiments. Also, in order to develop more elaborate and speedy system for large objects than existing SLS process, this study applies a new Selective Multi-Laser Sintering(SMLS) process and 3-axis dynamic Focusing Scanner for scanning large area instead of the existing $f\theta$ lens. In this process, the temperature has a great influence on sintering of the polymer. Also the laser parameters are considered like that laser beam power, scan speed, scan spacing. Now, this study is in progress to eveluate the effect of experimental parameters on the sintering process.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1299-1302
• /
• 2004

A real object duplication system (RODS), including three dimensional (3D) scanner and solid freeform fabrication system (SFFS), is a device to make three-dimensional objects directly from the drawing or photo data. A Selective Multi-Laser Sintering (SMLS) process designed in this paper is by which computer images received using 3D scanner are built up from polymer powder on building room of large size using dual laser at industrial type SFF system. Using the process can rapidly produce real object duplication components of industrial type such as cylinder, engine block, chassis of automobile, etc. In this paper, the industrial type SFF system using SMLS process is manufactured and the system is satisfied with high precision and high speed processing technique. To research characteristics of each part for theindustrial type SFF system, a structure and thermal analysis and test of each part is carried out. Also, to achievement of high performance for industrial type SFF system, design and fabrication for the structure, heater, nitrogen supply, laser and control part are carried out.

• 한국정보통신학회논문지
• /
• 제21권3호
• /
• pp.543-548
• /
• 2017

Epidemic 라우팅 프로토콜 기반의 메시지 확산 방식은 메시지를 수신한 기기들이 모두 릴레이를 수행하기 때문에 기기들의 전송 커버리지 중복으로 인한 메시지 중복 수신 문제가 빈번하게 발생한다. 따라서 본 논문에서는 이러한 문제점을 완화하기 위해 전송 범위 내에 존재하는 기기들 중 최외곽에 위치한 k개의 기기들만이 메시지 릴레이를 수행하는 최외곽 k개의 릴레이 선택 알고리즘을 제안하고 기존방식과 성능 비교분석을 수행한다. 포함 확률과 총 수신 메시지의 수 그리고 전송 효율에 대한 시뮬레이션 결과를 통해 제안 방안의 우수성을 증명한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.536-539
• /
• 2002

The reverse engineering (RE) technology can quickly generate 3D point cloud data of an object by capturing the surface of a model using a 3D scanner. In the rapid prototyping (RP) technology, prototypes are rapidly produced from 3D CAD models in a layer-by-layer additive basis. In this paper, a physical human head shape is duplicated using a new RP process, the Transfer-type Variable Lamination Manufacturing process using expandable polystyrene foam sheet (VLM-ST), after the point cloud data of a human head shape measured from 3D SNX scanner are converted to STL file. From the duplicated human head shape, it has been shown that the VLM-ST process in connection with the 3D scanner is a fast and efficient process in that shapes with free surface, such as the human head shape, can be duplicated with ease. Considering the measurement time and the shape duplication time, the use of 3D SNX scanner and the VLM-ST process is expected to reduce the lead-time fur the development of new products in comparison with the other existing RE-RP connected manufacturing systems.

• Molecules and Cells
• /
• 제23권1호
• /
• pp.39-48
• /
• 2007

Charcot-Marie-Tooth (CMT) disease and hereditary neuropathy with liability to pressure palsies (HNPP) are frequent forms of genetically heterogeneous peripheral neuropathies. Reciprocal unequal crossover between flanking CMT1A-REPs on chromosome 17p11.2-p12 is a major cause of CMT type 1A (CMT1A) and HNPP. The importance of a sensitive and rapid method for identifying the CMT1A duplication and HNPP deletion is being emphasized. In the present study, we established a molecular diagnostic method for the CMT1A duplication and HNPP deletion based on hexaplex PCR of 6 microsatellite markers (D17S921, D17S9B, D17S9A, D17S918, D17S4A and D17S2230). The method is highly time-, cost- and sample-saving because the six markers are amplified by a single PCR reaction and resolved with a single capillary in 3 h. Several statistical and forensic estimates indicated that most of these markers are likely to be useful for diagnosing the peripheral neuropathies. Reproducibility, as determined by concordance between independent tests, was estimated to be 100%. The likelihood that genotypes of all six markers are homozygous in randomly selected individuals was calculated to be $1.6{\times}10^{-4}$, which indicates that the statistical error rate for this diagnosis of HNPP deletion is only 0.016%.

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권2호
• /
• pp.1093-1100
• /
• 2013

Background: p53 gene variants i.e. 16 bp duplication in intron 3, Arg72Pro in exon 4 and G>A in intron 6 have been reported to modulate susceptibility to various malignancies. Therefore, the present study evaluated the role of these p53 polymorphisms in oral cancer susceptibility in a population from Gujarat, West India. Method: Genotype frequencies at the three p53 loci in 110 controls and 79 oral cancer cases were determined by the PCR-RFLP method. Results: Heterozygous individuals at exon 4 showed protection from developing oral cancer. Homozygous wild and heterozygous individuals at intron 3 and those heterozygous at exon 4 in combination appeared to be at lowered risk. Furthermore, carriers of the 16 bp duplication allele at intron 3, proline allele at exon 4 and G allele at intron 6 were protected from oral cancer development. Conclusion: p53 polymorphisms, especially Arg72Pro in exon 4 could significantly modify the risk of oral cancer development in Gujarat, West Indian population.