• 한국레이저가공학회지
• /
• 제9권1호
• /
• pp.1-7
• /
• 2006

In order to increase the productivity of conventional microstereolithography (MSL), digital micromirror device($DMD^{TM}$) based MSL is proposed and the feasibility of 3D rnicrocomponents fabrication is demonstrated in two ways; free surface and constrained surface techniques. The clearness of optical images at the exposure plane was confirmed for the fabrication of an accurate 3D structure by controlling the dynamic viscosity of FA1260T and the shape accuracy of a structure fabricated with epoxy-based resin ($Somos^{\circledR}$ 10120) was analyzed to determine the optimum curing conditions. After finding the appropriate process variables, the feasibility of multiple microstructures is then demonstrated. Due to the high productivity, MSL using $DMD^{TM}$ showed the potential to replace the existing focused laser beam MSL.

• The Journal of Advanced Prosthodontics
• /
• 제13권6호
• /
• pp.361-372
• /
• 2021

PURPOSE. To improve the clinical effects of complete denture use and simplify its clinical application, a digital complete denture restoration workflow (Functional Suitable Digital Complete Denture System, FSD) was proposed and preliminary clinical evaluation was done. MATERIALS AND METHODS. Forty edentulous patients were enrolled, of which half were treated by a prosthodontic chief physician, and the others were treated by a postgraduate student. Based on the primary impression and jaw relation obtained at the first visit, diagnostic denture was designed and printed to create a definitive impression, jaw relation, and esthetic confirmation at the second visit. A redesigned complete denture was printed as a mold to fabricate final denture that was delivered at the third visit. To evaluate accuracy of impression made by diagnostic denture, the final denture was used as a tray to make impression, and 3D comparison was used to analyze their difference. To evaluate the clinical effect of FSD, visual analogue scores (VAS) were determined by both dentists and patients. RESULTS. Two visits were reduced before denture delivery. The RMS values of 3D comparison between the impression made via diagnostic dentures and the final dentures were 0.165 ± 0.033 mm in the upper jaw and 0.139 ± 0.031 mm in the lower jaw. VAS ratings were between 8.5 and 9.6 in the chief physician group, while 7.7 and 9.5 in the student group; there was no statistical difference between the two groups. CONCLUSION. FSD can simplify the complete denture restoration process and reduce the number of visits. The accuracy of impressions made by diagnostic dentures was acceptable in clinic. The VASs of both dentists and patients were satisfied.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.982-986
• /
• 2005

Digital Manufacturing is a technology to facilitate effective product developments and agile productions by digital environments representing the physical and logical schema and the behavior of real manufacturing system including manufacturing resources, processes and products. A digital virtual factory as a well-designed and integrated environment is essential for successful applications of this technology. In this research, we constructed a sophisticated digital virtual factory by measuring and 3-D CAD modeling using parametric methods. Specific parameters of each objects were decided by object-oriented schema of the digital factory. It is expected that this method is very useful for constructions of a digital factory, and helps to manage diverse information and re-use 3D models.

• 한국산업융합학회 논문집
• /
• 제26권3호
• /
• pp.471-481
• /
• 2023

Digital twin is considered as a key technology of industry 4.0, thus being essential for the future of industrial production. Despite the significance, a systematic analysis of its technological landscape is lacking. This study aims to investigate the technological development trends and newly emerging technological convergence opportunities in the domain of digital twin by exploiting patent information derived from U SPTO. For this purpose, this study visualized and predicted the convergence dynamics among patent classification codes by adopting patent co-classification analysis and link prediction approach. The findings show that the number of digital twin-related patent applications has increased significantly since 2018. The CPC code G06F showed the highest eigenvector centrality, while G05B was characterized by highest betweenness centrality. According to the predictive model, 41 novel links were revealed, acting as potential technology convergence opportunities. These links were then categorized into 11 different domains. The most dominant category was "digital data processing and artificial intelligence", which could play a foundational role in the diffusion of digital twin technology. The presence of digital twin technology is dominant in manufacturing, but its applications are expected to expand, including "climate change", "healthcare" and "aerospace engineering". The derived insights can support R&D managers and policy makers in formulating R&D strategies and directing future R&D investment decisions.

• 한국정보전자통신기술학회논문지
• /
• 제16권3호
• /
• pp.138-151
• /
• 2023

우리나라 항만 인프라는 공용연수가 30년이 넘은 노후 항만시설물은 2019년 약 23%에서 2029년에는 47%로 증가하여 노후화가 빠르게 진행되고 있다. 오래된 기존의 항만은 경쟁력을 상실하고 항만 인프라의 발전을 저하하며 시설물에 대한 인적자원 기반 유지보수에 따른 인명사고가 증가한다. 이러한 문제를 디지털 트윈 기반의 체계적인 관리 기술 구축으로 해결하고자 한다. 본 연구는 항만 인프라의 재해와 노후화 현황과 스마트 항만의 사례를 살펴본 뒤 스마트 항만 기술이 반영된 디지털 트윈 구현 단계를 구체적으로 제시하고자 한다. 항만 인프라 연계 시스템을 분석하고 디지털 트윈 구현에 필수적인 시나리오를 작성하여 맵핑을 한다. 재해와 노후화 관리를 위한 3D 모델링과 시뮬레이션 데이터를 수집하여 디지털 트윈을 구현하며 항만 인프라에서 획득한 센싱 데이터, 영상 데이터 등의 데이터를 실시간으로 연동하여 상황별 항만 디지털 트윈 시뮬레이션 구현한다. 항만 인프라 재해와 노후화 관리를 위한 디지털 트윈 항만을 구현하는 경우 실시간 통합관제로 예지적인 항만 인프라 관리로 할 수 있을 뿐 아니라 재해에 관한 안전을 확보할 수 있다.

• Journal of Computing Science and Engineering
• /
• 제11권3호
• /
• pp.79-91
• /
• 2017

In this paper, the abdominal-deformation measurement scheme is conducted on a shape-flexible mannequin using the DIC technique in a stereo-vision system. Firstly, during the integer-pixel displacement search, a novel fractal dimension based on an adaptive-ellipse subset area is developed to track an integer pixel between the reference and deformed images. Secondly, at the subpixel registration, a new mutual-learning adaptive particle swarm optimization (MLADPSO) algorithm is employed to locate the subpixel precisely. Dynamic adjustments of the particle flight velocities that are according to the deformation extent of each interest point are utilized for enhancing the accuracy of the subpixel registration. A test is performed on the abdominal-deformation measurement of the shape-flexible mannequin. The experiment results indicate that under the guarantee of its measurement accuracy without the cause of any loss, the time-consumption of the proposed scheme is significantly more efficient than that of the conventional method, particularly in the case of a large number of interest points.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.1100-1105
• /
• 2022

Denoising, registering, and detecting changes of 3D digital map are generally conducted by skilled technicians, which leads to inefficiency and the intervention of individual judgment. The manual post-processing for analyzing 3D point cloud data of construction sites requires a long time and sufficient resources. This study develops automation technology for analyzing 3D point cloud data for construction sites. Scanned data are automatically denoised, and the denoised data are stored in a specific storage. The stored data set is automatically registrated when the data set to be registrated is prepared. In addition, regions with non-homogeneous densities will be converted into homogeneous data. The change detection function is developed to automatically analyze the degree of terrain change occurred between time series data.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.277-282
• /
• 2007

In recent years, dramatic advances in information technology have motivated the construction industry to improve its productivity. Most construction companies are trying to utilize some new information technologies for enhancing the structure quality, shortening construction time, and reducing the construction cost. Digital Mock-Up (DMU) technology utilizes 3D CAD/CAM system that shows the shape of a structure on the computer screen. By modeling and assembling the structure in 3D dimensional environments, some errors in design can be found before or during construction. In this paper, DMU technology was applied to the detail design and construction of In-Cheon Bridge and its effectiveness was evaluated. All components of a PSC box girder segment were modeled and assembled by using of 3D CAD tools and then, some interferences between components and errors were found and revised appropriately before construction. Consequently, DMU technology would improve the quality of the structure and reduce time and cost for construction.

• 한국공간정보시스템학회:학술대회논문집
• /
• 한국공간정보시스템학회 2005년도 추계학술대회
• /
• pp.29-34
• /
• 2005

지금까지 지도제작 등 공간정보의 구축을 위해 가장 빈번하게 사용되고 있는 기술 분야 중 하나인 항공사진측량은 작업방법이나 정확도 등의 검증이 완료된 상태이므로 신뢰성 높은 정확한 3차원 공간정보의 추출이 가능하다. 항공사진측량은 중첩된 지역을 촬영한 2장 이상의 항공사진과 최소한의 지상 기준점을 이용하여 3차원 입체모델을 구성함으로써 촬영당시의 지표면을 그대로 재현한다. 구성된 항공사진 입체모델을 통하여 해석 도화기나 수치사진측량시스템 등의 전문 장비를 이용하여 도화작업을 수행함으로써 정확한 3차원 정보를 추출할 수 있으며, 수치사진측량시스템을 이용하는 경우 제한적인 범위 내에서 자동화 작업의 수행이 가능하다. 특히 현재는 디지털 카메라를 이용한 방법이 개발됨으로써 그 효용성이 더욱 증가하고 있다 본 연구에서는 수치사진측량시스템을 이용하여 3차원 공간데이터를 구축하는 방법을 제시하고자 한다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.52-53
• /
• 2017

Through the case study, we surveyed an applicability of digital fabrication in irregular-shaped building construction project. By digital fabrication, we mean is a precision manufacturing method has been used in aircraft, ship and car manufacturing industry. We collected construction-completed "LotteWorld Tower Podium" project data and analyzed its process in terms of construction quality andduration. The result shows that digital fabrication is considered a competitive technology that enabled to complete the project in seven months within 3mm surface curvature threshold. The digitalfabrication is expected to apply on a number of irregular-shaped building construction project.