• Journal of the Korean Geotechnical Society
• /
• v.36 no.2
• /
• pp.5-15
• /
• 2020

The liquefaction phenomenon that occurred during the Pohang earthquake (M_L=5.4) brought new awareness to the people about the risk of liquefaction caused by the earthquake. Liquefaction hazard maps with 2 km grid made in 2014 used more than 100,000 borehole data for the whole country, and regions without soil investigation data were produced using interpolation. In the mapping of macro liquefaction hazard for the whole country, the site amplification effect and the ground water level 0 m were considered. Recently, the Ministry of Public Administration and Security (2018) published a new site classification method and amplification coefficient of the common standard for seismic design. Therefore, it is necessary to rewrite the liquefaction hazard map reflecting the revised amplification coefficient. In this study, the results of site classification according to the average shear wave velocity in soils before and after revision were compared in the whole country. Also, liquefaction assessment results were compared in Gangseo-gu, Busan. At this time, two ground accelerations corresponding to the 500 and 1,000 years of return period and two ground water table, 5 m for the average condition and 0 m the extreme condition were applied. In the drawing of liquefaction hazard map, a 500 m grid was applied to secure a resolution higher than the previous 2 km grid. As a result, the ground conditions that were classified as S_C and S_D grounds based on the existing site classification standard were reclassified as S₂, S₃, and S₄ through the revised site classification standard. Also, the result of the Liquefaction assessments with a return period of 500 years and 1,000 years resulted in a relatively overestimation of the LPI applied with the ground amplification factor before revision. And the results of this study have a great influence on the liquefaction assessment, which is the basis of the creation of the regional liquefaction hazard map using the amplification factor.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.19 no.3
• /
• pp.233-240
• /
• 1999

Understanding of the relationships between seeding rate and planting date is important for production of spring oats during the fall season. Therefore, this experiment was conducted to investigate seeding rate and planting date effects on forage performance and quality of spring oats(Avena sativa L.) at Suweon in 1997. The experiment was arranged in a split plot design with three replications. The main plots consisted of different seeding rates such as 150, 200, and 250kg/ha. The subplots consisted of different planting dates of spring oats such as 15, 22, and 29 August and 5 September. Dry matter content of oats was significantly decreased(P<0.01) as the planting date was delayed except the planting date of 5 September(24.8%). Dry matter content of forage oats planted on 15, 22, and 29 August was 23.0, 21.5, and 20.5%, respectively. A seeding $rate\;{\times}\;planting$ date interaction for dry matter content was highly significant(P<0.01). Crude protein content of oats was significantly increased(P<0.01) from 15.6 to 27.9% as the planting was delayed, while a significant seeding $rate\;{\times}\;planting$ date interaction for crude protein content of oats was observed. Acid detergent fiber(ADF) and neutral detergent fiber(NDF) contents of oats increased with early planting(P<0.01), but there was no significant difference among the seeding rates. ln vitro dry matter digestibility(IVDMD) of oats was significantly increased(P<0.01) as the seeding rate was increased together with late planting. Average dry matter yield of oats decreased(P<0.01) from 2,647 to 615kg/ha as the planting was delayed, but there was no significant difference among the seeding rates. A seeding $rate\;{\times}\;planting$ date interaction was observed for average dry matter yield of oats that the seeding rate increase in this experiment showed better at early planting dates. Crude protein yield of oats increased from 171 to 410kg/ha as the planting was delayed, and a significant increases(P<0.01) for crude protein yield was found among the seeding rates. ln vitro digestible dry matter(IVDDM) yield of oats decreased(P<0.01) as the planting was delayed, but there was no significant difference among the seeding rates. A significant seeding $rate\;{\times}\;planting$ date interaction for lVDDM of oats was found. The results of this study indicate that both the seeding rate of 200kg/ha and early planting before 29 August would be recommendable for forage yield and quality of oats in Korea.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.19 no.3
• /
• pp.211-220
• /
• 1999

The corn is mostly planted in mid-April in single-cropping silage system if possible, however, in a double-cropping silage system, the corn planting date is delayed until after the mid-May. The objective of this study was to evaluate agronomic characteristics and forage performance of the eight government recommended corn hybrids for silage at two dates of planting. Split-plot design replicated three times was used, that is, main plots were planting dates, sub-plots were eight hybrids at Suweon in 1997. Days from planting to silking of optimum planting was 84 days and that of late was 69 days. The difference in silking day among the hybrids was 6 days at optimum planting and 2 days at late planting. Plant height of optimum planting corn was higher than that of late one, however, ear height and stem diameter of optimum planting were lower than those of late planting corn. Among the corn hybrids tested, plant heights of 'P3156' and 'P3163' were higher than those of the other hybrids. Ear height of 'DK713' was the lowest among the corn hybrids and stem diameter of 'P3394' was thicker than that of the other hybrids. European corn borer(ECB) damage(16.6%) at optimum planting was lower than that(49.9%) of late, however, there were no significant ECB damage differences among the corn hybrids tested. Whole plant dry matter(DM) contents of 'P3525', 'P3394' and 'P3352' hybrids were higher than those of the other corn hybrids at harvest. Ear percentages of the total dry matter(DM) of 'P3394' and 'P3156' were higher than those of the other corn hybrids. Dry matter(DM) and total digestible nutrients(TDN) yields(19,696 and 14,621kg/ha) at optimum planting were higher than those (17,163 and 12,570kg/ha) of late planting, while there were no significant differences in DM and TDN yields among the corn hybrids tested. And those hybrids with greater proportion of grain in the whole plant have higher DM and TDN yields. Correlation coefficients for days from planting to silking with DM and TDN yields were $0.84^{**}$ and $0.87^{**}$, and those for ear percent were $0.86^{**}$ and $0.87^{**}$. Results of this study indicate that optimum planting date(15 April) is better than late planting date(16 May) in agronomic characteristics and forage production of silage corn. Days from planting to silking and ear percent as welI as other characters are important factors screening the corn hybrid for silage.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.19 no.3
• /
• pp.203-210
• /
• 1999

Of all the nutrients in liquid manure, N has the greatest potential both for the environment and for increasing forage yields. This experiment was carried out to determine the effect of different types and N rates of liquid manure on mineral content and nitrate-N of oats(Avena sativa L.), soil chemical characteristics in Suweon. Seven treatments consisting of chemical fertilizer $120kg\;N\;ha^{-1}$, liquid cattle manure 120, 240 and $360kg\;N\;ha^{-1}$, liquid swine manure 120, 240 and $360kg\;N\;ha^{-1}$ were arranged in a randomized complete block design with three replications. Compared with the plot of chemical fertilizer, increasing liquid manure N rates increased mineral contents of oats. Nitrate-N contents of oats were ranged from 1,881 to $2,605mg\;kg^{-1}$ in all treatments, which was orderly ranked as chemical fertilizer>liquid cattle manure $360kg\;N\;ha^{-1}$> liquid swine manure $240kg\;N\;ha^{-1}$. Contents of exchangeable cation of the soil were appeared to be higher with increasing liquid manure N rates. Amount of total-N and inorganic-N in soil affected by increasing liquid manure N rates, and there was the highest at liquid swine manure $360kg\;N\;ha^{-1}$ among the treatments. Nitrate-N concentration in infiltration water was not remarkably variable during the experimental period. Based on the results of this experiment, it is suggested that the amount of nitrogen in soil was orderly ranked as liquid swine manure $360kg\;N\;ha^{-1}$, followed by liquid swine manure $240kg\;N\;ha^{-1}$.

• Korean Journal of Optics and Photonics
• /
• v.16 no.3
• /
• pp.182-190
• /
• 2005

The fiber Raman amplifier(FRA) is a distinctly advantageous technology. Due to its wider, flexible gain bandwidth, and intrinsically lower noise characteristics, FRA has become an indispensable technology of today. Various FRA modeling methods, with different levels of convergence speed and accuracy, have been proposed in order to gain valuable insights for the FRA dynamics and optimum design before real implementation. Still, all these approaches share the common platform of coupled ordinary differential equations(ODE) for the Raman equation set that must be solved along the long length of fiber propagation axis. The ODE platform has classically set the bar for achievable convergence speed, resulting exhaustive calculation efforts. In this work, we propose an alternative, highly efficient framework for FRA analysis. In treating the Raman gain as the perturbation factor in an adiabatic process, we achieved implementation of the algorithm by deriving a recursive relation for the integrals of power inside fiber with the effective length and by constructing a matrix formalism for the solution of the given FRA problem. Finally, by adiabatically turning on the Raman process in the fiber as increasing the order of iterations, the FRA solution can be obtained along the iteration axis for the whole length of fiber rather than along the fiber propagation axis, enabling faster convergence speed, at the equivalent accuracy achievable with the methods based on coupled ODEs. Performance comparison in all co-, counter-, bi-directionally pumped multi-channel FRA shows more than 102 times faster with the convergence speed of the Average power method at the same level of accuracy(relative deviation < 0.03dB).

• Journal of the Korea Concrete Institute
• /
• v.24 no.3
• /
• pp.275-283
• /
• 2012

Steel Plate for Rebar Connection was recently developed to splice rebars in delayed slab-wall joints in high-rise building, slurry wall-slab joints, temporary openings, etc. It consists of several couplers and a thin steel plate with shear key. Cyclic loading tests on slab-wall joints were conducted to verify structural behavior of the joints having Steel Plate for Rebar Connection. For comparison, joints with Rebend Connection and without splices were also tested. The joints with Steel Plate for Rebar Connection showed typical flexural behavior in the sequence of tension re-bar yielding, sufficient flexural deformation, crushing of compression concrete, and compression rebar buckling. However, the joints with Rebend Connection had more bond cracks in slabs faces and spalling in side cover-concrete, even though elastic behavior of the joints was similar to that of the joints with Steel Plate for Re-bar Connection. Consequently, the joints with Rebend Connection had less strengths and deformation capacities than the joints with Steel Plate for Re-bar Connection. In addition, stiffness of the joints with Rebend Connection degraded more rapidly than the other joints as cyclic loads were applied. This may be caused by low elastic modulus of re-straightened rebars and restraightening of kinked bar. For two types of diameters (13mm and 16mm) and two types of grades (SD300 and SD400) of rebars, the joints with Steel Plate for Rebar Connection had higher strength than nominal strength calculated from actual material properties. On the contrary, strengths of the joints with Rebend Connection decreased as bar diameter increased and as grade becames higher. Therefore, Rebend Connection should be used with caution in design and construction.

• Korean Journal of Food Science and Technology
• /
• v.37 no.2
• /
• pp.233-240
• /
• 2005

To discover new functional materials using edible plants, antioxidant activities of methanol extracts from various parts of seven wild vegetables were investigated in vitro. Total polyphenol contents, determined by Folin-Denis method, varied from 16.74 to $130.22{\mu}g/mg$. Radical-scavenging activities of methanol extracts were examined using ${\alpha},\;{\alpha}-diphenyl-{\beta}-pirrylhydrazyl$ (DPPH) radicals and 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid) (ABTS) assay. Inhibition effects on peroxidation of linoleic acid determined by ferric thiocyanate (FTC) method and on oxidative degradation of 2-deoxy-D-ribose in Fenton-type reaction system were dose-dependent. Athyrium acutipinulum Kodama (leaf and rood), Achyranthes japonica (Miq.) Nakai (seed), and Solidago virga-aurea var. gigantea Nakai (root) showed relatively high antioxidant activities in various systems.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.2
• /
• pp.33-40
• /
• 2014

The purpose of this study is to examine vegetation of the outer walls of the Jeongyi Town Wall in Jeju and analyze the characteristics and problems identified, for suggesting preliminary data for selecting species of plants appropriate for the greening of the walls in the southern temperate climate region, including Jeju. The result of this study is as follows. The number of plants growing naturally around the walls of the town was identified to be 52 taxa. Based on the list of naturalized plants, there are 5 taxa; Sonchus oleraceus, Houttuynia cordata, Crassocephalum crepidioides, Erigeron annuus and Lamium purpureum. The number of species by district was from 3 to 14 taxa with 7.1 taxa on average. Analyzing by the constancy class, plants in class III included Sedum bulbiferum, Trichosanthes kirilowii, Hedera rhombea and Boehmeria nivea. Manipulation of the species composition table shows that the number of plant species growing naturally around the walls of Jeongyi Town Wall is a total of 52 taxa, including 11 taxa by differential species of community and 41 taxa by companion species. The types of plants very useful for the covering of the walls are evergreen climbing vine, such as Hedera rhombea, Ficus thunbergii and Euonymus fortunei and deciduous climbing vine, such as Parthenocissus tricuspidata, Trichosanthes kirilowii and Paederia scandens. In addition, Ficus stipulata is identified as a vegetation more appropriate for the southern-ward lattice-blocked walls. Woody plants, such as Akebia quinata, Celastrus flagellaris, Ampelopsis brevipedunculata for. citrulloides, Rubus hirsutus, Clematis apiifolia and herbaceous plants, such as Dioscorea tenuipes, D. quinqueloba, D. nipponica, Cayatia japonica and Paederia scandens var. angustifolia are highly useful materials for climbing plants for covering the walls of the southern province. Pteridophyte, such as Lemmaphyllum microphyllum, Pteris multifida, Cyrtomium falcatum and Lygodium japonicumare suggested as very useful for increasing unique regional characteristics of the southern province, including Jeju.

• Current Research on Agriculture and Life Sciences
• /
• v.4
• /
• pp.77-86
• /
• 1986

The purpose of this study is to estimate an optimum formula of rainfall intensity on basis of the characteristics for short period of rainfall duration in Kyungpook province for the design of urban sewerage and small basin drain system. Results studied are as follows; 1. The optimum method for Taegu and Pohang, Iwai's and Gumbel-Chow's method are recommended respectively. 2. The opotimum type of rainfall intensity for these area, $I=\frac{a}{\sqrt{t}+b}$ (Japanese type), is confirmed with 2.52~4.17 and 1.86~4.54 as a standard deviation for Taegu and Pohang respectively. The optimum formula of rainfall intensity are as follows. Taegu : T : 200 year - $I=\frac{824}{\sqrt{t}+1.5414}$ T : 100 year - $I=\frac{751}{\sqrt{t}+1.4902}$ T : 50 year - $I=\frac{678}{\sqrt{t}+1.4437}$ T : 30 year - $I=\frac{623}{\sqrt{t}+1.4017}$ T : 20 year - $I=\frac{580}{\sqrt{t}+1.3721}$ T : 10 year - $I=\frac{502}{\sqrt{t}+1.3145}$ T : 5 year - $I=\frac{418}{\sqrt{t}+1.2515}$ Pohang : T : 200 year - $I=\frac{468}{\sqrt{t}+1.1468}$ T : 100 year - $I=\frac{429}{\sqrt{t}+1.1605}$ T : 50 year - $I=\frac{391}{\sqrt{t}+1.1852}$ T : 30 year - $I=\frac{362}{\sqrt{t}+1.2033}$ T : 20 year - $I=\frac{339}{\sqrt{t}+1.2229}$ T : 10 year - $I=\frac{299}{\sqrt{t}+1.2578}$ T : 5 year - $I=\frac{257}{\sqrt{t}+1.3026}$ 3. Significant I.D.F. curves derived should be applied to estimate a suitable rainfall intensity and rainfall duration.

• The Korean Journal of Vision Science
• /
• v.20 no.4
• /
• pp.469-482
• /
• 2018

Purpose : We investigated the change of spherical and comma aberrations after wearing aspheric soft contact lens (ASCL) in young myopes. Methods : Fifty young myopes ($23.15{\pm}1.70years$, spherical equivalent: $-2.90{\pm}1.75D$) were recruited and refractive errors were corrected using ASCL (Biotrue, Bausch+Lomb, USA). High order aberrations were measured in the 4 mm pupil size using the wavefront analyze and pupil sizes were measured with a pupillometer at the modes of scotopic condition (light off) at 3.5 m in the 100 lx illuminance condition. Results : Spherical aberrations and coma aberration of the 20s myopes were $0.026{\pm}0.031{\mu}m$ and $0.078{\pm}0.039{\mu}m$ respectively, and $0.019{\pm}0.026{\mu}m$ and $0.082{\pm}0.038{\mu}m$ after ASCL wear that spherical aberration was decreased and coma aberration was increased. However, spherical aberration was decreased in the 68% of the subject have positive spherical aberration, and increased in the 11% of the subject have negative spherical aberration. Coma aberration was increased in the 53% of the subject, did not change in the 19% of the subjects, and decreased in the 28% of the subject. Spherical aberration was not different with the refractive errors in low and moderate myopies, however, coma aberrations was higher in the higher myopes. Conclusion : In a scotopic condition without accommodation stimuli, spherical aberration is decreased after wearing ASCL, however in the subject have negative spherical aberration spherical aberration could be increased, and which is thought to be the influence of contact lens design and pupil size.