• 한국지진공학회논문집
• /
• 제24권6호
• /
• pp.253-266
• /
• 2020

The extended slip-weakening model was investigated by using a compiled set of source-spectrum-related parameters, i.e. seismic moment M_o, S-wave velocity V_s, corner-frequency f_c, and source-controlled high-cut frequency fmax, for 113 shallow crustal earthquakes (focal depth less than 25 km, M_W 3.0~7.5) that occurred in Japan from 1987 to 2016. The investigation was focused on the characteristics of stress drop, radiation energy-to-seismic moment ratio, radiation efficiency, and fracture energy release rate, G_c. The scaling relationships of those source parameters were also investigated and compared with those in previous studies, which were based on generally used singular models with the dimensionless numbers corresponding to f_c given by Brune and Madariaga. The results showed that the stress drop from the singular model with Madariaga's dimensionless number was equivalent to the breakdown stress drop, as well as Brune's effective stress, rather than to static stress drop as has been usually assumed. The scale dependence of stress drop showed a different tendency in accordance with the size category of the earthquakes, which may be divided into small-moderate earthquakes and moderate-large earthquakes by comparing to M_o = 10¹⁷~10¹⁸ Nm. The scale dependence was quite similar to that shown by Kanamori and Rivera. The scale dependence was not because of a poor dynamic range of recorded signals or missing data as asserted by Ide and Beroza, but rather it was because of the scale dependent V_r-induced local similarity of spectrum as shown in a previous study by the authors. The energy release rate G_c with respect to breakdown distance D_c from the extended slip-weakening model coincided with that given by Ellsworth and Beroza in a study on the rupture nucleation phase; and the empirical relationship given by Abercrombie and Rice can represent the results from the extended slip-weakening model, the results from laboratory stick-slip experiments by Ohnaka, and the results given by Ellsworth and Beroza simultaneously. Also the energy flux into the breakdown zone was well correlated with the breakdown stress drop, ${\tilde{e}}$ and peak slip velocity of the fault faces. Consequently, the investigation results indicate the appropriateness of the extended slip-weakening model.

• 한국의상디자인학회지
• /
• 제19권4호
• /
• pp.93-104
• /
• 2017

This study is a basic study to develop shoe last design technology to enhance and revitalize the competitiveness of the handmade shoes. In-depth interviews were conducted with four manufacturers in Seongsu-dong to identify the production status and design technology of shoe lasts. The result of the research is as follows. Firstly, shoe lasts for adults are produced at intervals of 5mm between 245mm-285mm for men's shoes, and between 220-260mm for women's shoes. The production rate of women's shoes was high in the order of general type, boot type, and sandal type while men's shoes mainly produce general type. Secondly, the master last size and ball girth rating for men's and women's shoes were analyzed to EE-EEE grade at 260mm and D grade at 235mm. The length of the master last for men's shoes is 276-290mm, the heel width is 60-65mm, the ball width is 88-90mm, the ball girth is 250mm, and the waist girth is 248mm. The length of the master shoe last for women's shoes is 236-245 mm, the heel width is 50-55mm, the ball width is 78-80mm, the ball girth is 211~213mm, and the waist girth is 213~215mm. Thirdly, the last grading deviation is 5mm in length, the heel width is 0.5mm, the ball girth is 3.5mm, and the ball with is 1.2mm. The ball girth dimensions of Oxford type, slip-on type, and sneakers type are made at 250mm, 248mm, and 245mm for men's shoes. For women's shoes, the ball girth dimensions of pump type, loafer & boot type, and sandal type are made at 211~213mm, 214~215mm, and 211mm. Fourthly, t+he construction of the automation system is insufficient and almost completely depends on manual production.

• Journal of Periodontal and Implant Science
• /
• 제29권1호
• /
• pp.209-231
• /
• 1999

Even though titanium(Ti) and its alloys are the most used dental implant materials, there are some problems that Ti wears easily and interferes normal osteogenesis due to the metal ions. Ti coated with bioactive ceramics such as hydroxyapatite has also such problems as the exfoliation or resorption of the coated layer, Recent studies on implant materials have been proceeding to improve physical properties of the implant substrate and biocompatibility of the implant surfaces. The purpose of the present study was to examine the physical property and bone tissue compatibility of bioinert nitrides ion plated Ti, Button type specimens(14mm in diameter, 2.32rrun in height) for the abrasion test and cytotoxicity test and thread type implants(3.75mm in diameter, 6mm in length) for the animal experiments were made from Ti(grade 2) and 316LVM stainless steel. Ti specimens were ion plated with TiN, ZrN by the low temperature arc vapor deposition, and the depth profile of the TiN/Ti, ZrN/Ti ion plated surface was examined by Auger Electron Spectroscopy. Three kind of button type specimens .of TiN/Ti, ZrN/Ti and Ti were used for abrasion test, and HEPAlClC7 cells and CCD cells were cultivated for 4 days with the specimens for cytotoxicity test. Thread type implants of TiN/Ti, ZrN/Ti, Ti, 316LVM were implanted on the femur of 6 adult dogs weighing 10kg-13kg. Two dogs were sacrified for histological examination after 45 days and 90 days, and four dogs were sacrified for the removal torque test of the implant') after 90 days. The removal torque force was measured by Autograph (Shimadzu Co., AGS-1000D series, Japan). Abrasion resistance of TiN/Ti was the highest, and that of ZrN/Ti and Ti were followed. The bioinert nitride ion plated Ti had much better abrasion resistance, compared with Ti, In the cytotoxicity test, the number of both cells were increased in all specimens, and there were no significant difference in cytotoxic reaction among all groups (p>0.1), In histological examination, 316LVM showed the soft tissue engagement in interface between the implant and bone, but the other materials after 45 days noted immature new bone formation in the medullary portion along the implant surface, and those after 90 days showed implant support by new bone formation in both the cortical and the medullary portion, The removal torque force of Tilv/Ti showed significantly higher than that of Ti(p(O,05). The difference in removal torque force between TiN/Ti and ZrN/Ti was not significant(p>0.05), and that of 316LVM was lowest among all groups(p<0.05). These results suggest that bioinert nitrides ion plated Ti can resolve the existing problems of Ti and bioactive ceramics, and it may be clinically applicable to human.

• Journal of Periodontal and Implant Science
• /
• 제44권4호
• /
• pp.158-168
• /
• 2014

Purpose: The present study was conducted to evaluate the impact of scaling and root planing (SRP) on the C-reactive protein (CRP) levels of gingival crevicular fluid (GCF) and serum in chronic periodontitis patients with type 2 diabetes mellitus (T2DM-CP) or without type 2 diabetes mellitus (NDM-CP). Methods: Forty-eight human participants were divided into two groups: an experimental (T2DM-CP) group (group I, n=24) comprising chronic periodontitis patients with random blood sugar ${\geq}200mg/dL$ and type 2 diabetes mellitus, and control (NDM-CP) group (group II, n=24) of those with chronic periodontitis and random blood sugar <200 without T2DM for the study. All subjects underwent nonsurgical periodontal therapy (NSPT) including complete SRP and subgingival debridement. Periodontal health parameters, plaque index (PI), gingival index (GI), probing pocket depth (PPD), clinical attachment level (CAL), GCF volume (GCF vol), GCF-CRP, random blood glucose (RBS), glycated hemoglobin, and systemic inflammatory markers, serum CRP, total leukocyte count (TLC), neutrophil count (Neutr) and lymphocyte count (Lymph), were evaluated at baseline, 1 month, and 3 months after SRP. Results: NSPT resulted in statistically significant improvement in periodontal health parameters (PI, GI, PPD, CAL, GCF vol), CRP levels in serum as well as GCF of both groups I and II. The mean improvement in periodontal health parameters (PI, GI, PPD, CAL, GCF vol), CRP levels in serum and GCF was greater in group I than group II after NSPT. There was nonsignificant increase in GCF-CRP, TLC, Lymph, and RBS, and a significant increase in Neutr and Serum CRP in group II at 1 month. The Serum CRP level of 20 out of 24 group II patients had also increased at 1 month. Conclusions: The CRP levels in both GCF and serum were higher in T2DM-CP patients than in NDM-CP patients. Although there was a significant improvement in both the groups, greater improvement was observed in both GCF and serum samples of T2DM-CP patients.

• 한국토양비료학회지
• /
• 제20권1호
• /
• pp.1-6
• /
• 1987

답토양(畓土壤) 6개유형중(個類型中) 가장 넓은 분포면적(分布面積)을 가진 보통답(普通畓)의 특성(特性)과 토지이용(土地利用) 및 토양생성(土壤生成)에 대(對)하여 조사연구(調査硏究)한 결과(結果)는 다음과 같다. 1. 보통답(普通畓)의 분포면적(分布面積)은 전체답면적(全體畓面積)의 33%에 해당(該當)되며 그중(中) 곡간(谷間) 및 선상지(扇狀地)에 54% 그 외(外)는 하해혼성평탄지(河海混成平坦地)와 하성평단지(河成平坦地)에 분포(分布)한다. 2. 보통답(普通畓)의 토양배수(土壤排水)는 대부분(大部分) 약간(若干) 불량(不良)으로 글라이화(化)된 식질(埴質) 및 식양질계(埴壤質系)로 물리성(物理性)이 양호(良好)한 편이고 토심(土深) 및 지하수위(地下水位)가 깊우며 토양(土壤)의 잠재생산능력은 높은 편이다. 3. 전체보통답(全體普通畓)의 이화학적특성(理化學的特性)을 보면 점토함량(粘土含量)은 표토(表土)와 심토(心土)가 많은 편(便)이며 토양반응(土壤反應)은 약(弱)한 산성(酸性)이었다. 유기물함량(有機物含量)은 표토(表土)는 있는 편(便)이나 심토(心土)는 적었다. 염기치환용량(鹽基置換容量)은 높고 치환성염기(置換性鹽基)는 표토(表土) 6.62, 심토(心土) 7.74 me/100 g 정도(程度)였다. 염기포화도(鹽基飽和度)는 높았으며 유효인산(有效燐酸)은 우리나라 답토양평균치(畓土壤平均値)인 60 ppm 보다는 다소(多少) 하회(下廻)하였다. 4. 생성원인(生成原因)은 제사기신층(第四期新層)에 속(屬)하지만 현세충적층인 것으로 보여지며 미농무성(美農務省)의 구분류체계(舊分類體系)에 의(依)하면 대부분(大部分) Low humic gley soils에 해당(該當)되고 F. A. O분류안(分類案)에 의(依)하면 Gleysols에 속(屬)하며 일본(日本)의 시비개선사업(施肥改善事業)에서는 토양군(土壤群)은 회색토양(灰色土壤), 토양아군(土壤亞群)은 회갈색토양(灰褐色土壤)이다. US soil taxonomy(Subgroup)에 의(依)하면 Typic 및 Fluventic Haplaquepts에 속(屬)한다.

• Ocean and Polar Research
• /
• 제30권4호
• /
• pp.453-466
• /
• 2008

In order to examine the generation mechanism of long ocean waves along the west coast of Korea and to understand the amplification process of the long ocean waves, sea level, atmospheric pressure and wind data observed every minute from 2007 March 29 to 2007 April 1 were analyzed and onedimensional numerical ocean model experiments were performed. An atmospheric pressure jump propagated southeastward from Backryungdo to Yeonggwang along the west coast of Korea with speed of $13{\sim}27\;m/s$ between 2007 March 30 23:00 and 2007 April 1 1:30. Average magnitude of pressure jump was 4.2 hPa. As a moving atmospheric jump propagated from north to south along the coast, long ocean waves were generated and the sea level abnormally rose or fell at Anheung, Kunsan, Wido and Yeonggwang. Average amplitude of sea level rise (or fall) was about 113.6 cm. In a one-dimensional numerical ocean model, nonlinear shallow water equations were numerically integrated and a moving atmospheric pressure jump with traveling speed of 24 m/s was used as an external force. While the atmospheric pressure jump travels over 60 m depth ocean, a long ocean wave is generated. Because the propagation speed of the atmospheric jump is almost equal to that of the long ocean wave, Proudman resonance occurs and the long ocean wave amplifies. As the atmospheric pressure jump moves into the coastal area shallower than 60 m, the speed of the long ocean wave decreases and Proudman resonance effect decreases. However, the amplitude of the long ocean wave increases and wave length becomes shorter because of shoaling effect. When the long ocean wave hits the land boundary, amplitude of the long ocean wave drastically amplifies due to reflection. Data analysis and numerical experiments suggest that the southeastward propagation of an atmospheric pressure jump over the shallow ocean, which is a necessary condition for Proudaman resonance, generated the long ocean waves along the west coast of Korea on 2007 March 31 and the ocean waves amplified due to shoaling effect in the coastal area and reflection at the shore.

• 한국통신학회논문지
• /
• 제31권1C호
• /
• pp.26-35
• /
• 2006

본 논문에서는 지능적인 경로 계획을 위한 스테레오 카메라 기반의 공간좌표 검출 기법을 이용한 자율 이동 로봇 시스템을 제안하였다. 우선 스테레오 카메라로부터 입력된 영상 중 좌 영상에 YCbCr 컬러 모델 및 무게 중심법을 이용하여 이동중인 보행자의 얼굴 영역과 중심좌표를 검출하고, 검출된 좌표 값에 따라 스테레오 카메라의 능동적인 로봇 제어를 통해 이동하는 보행자를 실시간적으로 검출하게 된다. 다음으로, 로봇구동에 의해 추적 제어된 스테레오 카메라의 좌, 우 영상간의 시차정보와 스테레오 카메라 내부 변환관계를 통해 깊이 정보를 검출한 후, 검출된 깊이 지도로부터 각 열에 존재하는 최소값을 이용한 2차원 공간좌표를 검출하여 이동 로봇과 보행자간의 거리와 위치좌표는 물론 다른 물체들과의 상대 거리를 산출하게 되며, 산출된 위치 좌표를 토대로 이동 로봇의 지능적인 경로 추정 및 판단에 따라 자율적인 주행을 수행하게 된다. 실시간적으로 입력되는 240 프레임의 스테레오 영상을 사용한 실험결과, 이동 로봇과 전방에 존재하는 장애물간의 거리 및 보행자와 장애물간 상대거리의 계산치와 측정치간의 오차가 평균 $2.19\%$와 $1.52\%$이하로 각각 유지됨으로써 경로 계획을 위한 공간좌표 검출에 기반을 둔 실질적인 이동 로봇 시스템의 구현 가능성을 제시하였다.

• 태양에너지
• /
• 제2권2호
• /
• pp.29-36
• /
• 1982

The Solar Energy R&D Department of KIER under the auspice of the Korean government is pushing hard on the development of the passive solar technology with high priority for the expeditious widespread use of solar energy in Korea, since the past few years of experiences told us that the active solar technology is not yet ready for massive commercialization in Korea. KIER has completed the construction of the Solar Energy Research & Test Center in Seoul, which houses the major facilities for its all solar test programs. The Center was designed as a passive solar building with great emphasis on the energy conserving ideas. The Center is not only the largest passive building in Korea, but also the exhibit center for the effective demonstration of the passive heating and cooling technology to the Korean public. The Center was designed to satisfy the requirements based on the technical and economical criteria set by the KIER. Careful considerations, therefore, were given in depth in the following areas to meet the requirements. 1) Passive Heating Concepts The Center employed the combination of direct and indirect gain system. The shape of the Center is Balcomb House style, and it included a large built-in sunspace in front. A partition, consists of transparent and translucent glazings, separates the sunspace and the living space. Since most activities in the Center occur during the day time, direct utilization of the solar energy by the living spaces was emphasized with the limited energy storage capacity. 2) Passive Cooling Concepts(for Summer) Natural ventilation concept was utilized throughout the building. In the direct gain portion of the system, the front glazing can be openable during the cooling season. Natural convection scheme was also applied to the front sunspace for the Summer cooling. Reflective surfaces and curtains were utilized wherever needed. 3) Auxiliary Heat ing and Cooling System As an auxiliary cooling system, mechanical means(forced convection system) were adopted. Therefore forced air heating system was also used to match the duct work requirements of the auxiliary cool ing system. 4) Effect ive Insulation & Others These included the double glazed windows, the double entry doors, the night glazing insulation, the front glazing-frame insulation as well as the building skin insulation. All locally available construction materials were used, and natural lightings were provided as much as possible. The expected annual energy savings (compared to the non-insulated conventional building)of the Center was estimated to be about 80%, which accounts for both the energy conservation and the solar energy source. The Center is being instumented for the actual performance tests. The experimental results of the simplified tests are discussed in this paper.

• 천문학회보
• /
• 제43권1호
• /
• pp.34.2-35
• /
• 2018

Galaxy transition from star-forming to quiescent, accompanied with morphology transformation, is one of the key unresolved issues in extragalactic astronomy. Although several environmental mechanisms have been proposed, a deeper understanding of the impact of environment on galaxy transition still requires much exploration. My Ph.D. thesis focuses on which environmental mechanisms are primarily responsible for galaxy transition in different environments and looks at what happens during the transition phase using multi-wavelength photometric/spectroscopic data, from UV to mid-infrared (MIR), derived from several large surveys (GALEX, SDSS, and WISE) and our GMOS-North IFU observations. Our multi-wavelength approach provides new insights into the *late* stages of galaxy transition with a definition of the MIR green valley different from the optical green valley. I will present highlights from three areas in my thesis. First, through an in-depth study of environmental dependence of various properties of galaxies in a nearby supercluster A2199 (Lee et al. 2015), we found that the star formation of galaxies is quenched before the galaxies enter the MIR green valley, which is driven mainly by strangulation. Then, the morphological transformation from late- to early-type galaxies occurs in the MIR green valley. The main environmental mechanisms for the morphological transformation are galaxy-galaxy mergers and interactions that are likely to happen in high-density regions such as galaxy groups/clusters. After the transformation, early-type MIR green valley galaxies keep the memory of their last star formation for several Gyr until they move on to the next stage for completely quiescent galaxies. Second, compact groups (CGs) of galaxies are the most favorable environments for galaxy interactions. We studied MIR properties of galaxies in CGs and their environmental dependence (Lee et al. 2017), using a sample of 670 CGs identified using a friends-of-friends algorithms. We found that MIR [3.4]-[12] colors of CG galaxies are, on average, bluer than those of cluster galaxies. As CGs are located in denser regions, they tend to have larger early-type galaxy fractions and bluer MIR color galaxies. These trends can also be seen for neighboring galaxies around CGs. However, CG members always have larger early-type fractions and bluer MIR colors than their neighboring galaxies. These results suggest that galaxy evolution is faster in CGs than in other environments and that CGs are likely to be the best place for pre-processing. Third, post-starburst galaxies (PSBs) are an ideal laboratory to investigate the details of the transition phase. Their spectra reveal a phase of vigorous star formation activity, which is abruptly ended within the last 1 Gyr. Numerical simulations predict that the starburst, and thus the current A-type stellar population, should be localized within the galaxy's center (< kpc). Yet our GMOS IFU observations show otherwise; all five PSBs in our sample have Hdelta absorption line profiles that extend well beyond the central kpc. Most interestingly, we found a negative correlation between the Hdelta gradient slopes and the fractions of the stellar mass produced during the starburst, suggesting that stronger starbursts are more centrally-concentrated. I will discuss the results in relation with the origin of PSBs.

• Asian-Australasian Journal of Animal Sciences
• /
• 제23권2호
• /
• pp.263-271
• /
• 2010

This trial was conducted to determine the effects of feeding a diet containing solid-state fermented rapeseed meal on performance, nutrient digestibility, intestinal ecology and intestinal morphology of broiler chickens. A mixed liquid culture, containing approximately 5 log cfu/ml Lactobacillus fermentum, Enterococcus faecium, Saccharomyces cerevisae and Bacillus subtilis was prepared in a 1:1:1:1 ratio. A basal substrate (BS) containing 75% rapeseed, 24% wheat bran and 1% brown sugar was mixed with the liquid culture in a ratio of 10:3. Over the 30-day fermentation, isothiocyanates were reduced from 119.6 to 14.7 mmol/kg. A total of 168, day-old male Arbor Acres broiler chicks were assigned to one of three dietary treatments including a corn-soybean meal based control diet as well as two experimental diets in which the control diet was supplemented with 10% of the BS containing unfermented rapeseed meal or 10% of the BS containing rapeseed meal subjected to solid state fermentation. There were 8 pens per treatment and 7 birds per pen. From days 19-21 and days 40-42, uncontaminated excreta were collected from each pen for digestibility determinations. In addition, digesta from the colon and ceca were collected to determine the number of lactobacilli, enterobacteria and total aerobes. The middle sections of the duodenum, jejunum, and ileum were collected for intestinal morphology. Over the entire experimental period (d 1-42), the weight gain and feed conversion of birds fed fermented rapeseed meal were superior (p<0.05) to that of birds fed nonfermented rapeseed meal and did not differ from the soybean control. On day 42, birds fed fermented rapeseed meal had higher (p<0.05) total tract apparent digestibility coefficients for dry matter, energy, and calcium than birds fed non-fermented rapeseed meal. Colon and ceca digesta from broilers fed the fermented feed had higher (p<0.05) lactobacilli counts than birds fed the control and non-fermented rapeseed meal diets on day 21 and 42. Fermentation also improved (p<0.05) villus height and the villus height:crypt depth ratio in the ileum and jejunum on day 21 and 42. The results indicate that solid-state fermentation of rapeseed meal enhanced performance and improved the intestinal morphology of broilers and may allow greater quantities of rapeseed meal to be fed to broilers potentially reducing the cost of broiler production.