• 제목/요약/키워드: 3D depth

검색결과 2,599건 처리시간 0.043초

인공송신원 가청주파수 자기지전류 탐사를 이용한 제주 동남부의 전기비저항 구조 및 지하수 분포 조사 (Geoelectrical Structure and Groundwater Distribution in the South-eastern Region of Jeju Island Revealed by Controlled Source Audio-frequency Magneto Telluric (CSAMT) survey)

  • 양준모;권병두;이희순;송성호;박계순;이규상
    • 자원환경지질
    • /
    • 제40권1호
    • /
    • pp.67-85
    • /
    • 2007
  • 제주도 동남부의 전기비저항 구조 및 지하수 분포 형태를 조사하기 위해 제주도 중산간에서 남동방향으로 해안 지역을 횡단하는 두 측선에 대해 인공송신원 자기지전류탐사를 수행하였다. 측점들이 위치한 지질학적 상황을 고려하여 세 종류의 일차원 역산 기법을 도입하였고, 해석의 신뢰성 향상을 위해 각 역산 결과를 비교, 분석하였다. 이 과정으로부터 도출된 제주 동남부의 개략적인 전기비저항 구조는 고비저항-저비저항-보다 저비저항을 갖는 3층 구조였다. 역산 결과와 측점 부근의 심부 시추 자료의 비교를 통해 제주도 동남부의 각 층별 암상이 개략적으로 추정되었다: 지질학적 층서의 관점에서 제 1층과 2층은 두께 100-250m의 현무암층에, 제 3층은 서귀포층 및 U층에 대응하는데, 서귀포층의 두께는 조사심도가 충분히 깊지 않고 서귀포층과 U층의 전기비저항 차이가 작기 때문에 추정할 수 없었다. 그러나 주대수층과 밀접하게 관련 있는 서귀포층은 제주도 동남부 지역의 경우 중산간 지역부터 해안 지역까지 뚜렷한 공간적 연속성을 보여주었다.

2차원 부정류 모형을 이용한 둔치의 수리특성 분석 (Analysis of Hydraulic Characteristics of Flood Plain Using Two-Dimensional Unsteady Model)

  • 구영훈;송창근;김영도;서일원
    • 대한토목학회논문집
    • /
    • 제33권3호
    • /
    • pp.997-1005
    • /
    • 2013
  • 낙동강의 횡단면은 복단면 형태를 띄고 있으므로, 여름철 집중호우에 의해서 하천유량이 증가하면 둔치 상부까지 하천수위가 상승하는 특징이 있다. 또한 최근 강우강도 및 홍수 빈도의 증가로 인해 관련 피해가 급증하고 있으며, 이는 홍수터에 설치된 공원과 같은 친수시설들의 침수피해와 직접적으로 연관되므로, 극한강우 시 둔치에서의 수리학적 영향분석이 필요하다고 판단된다. 본 연구에서는 다양한 친수시설들이 조성되어 있는 강정고령보와 달성보 사이를 모의구간으로 선정하여 태풍 산바에 의해 첨두홍수량이 발생한 시점을 전후로 총 42시간에 걸친 수치모의를 실시하였다. 2차원 부정류 모형인 FaSTMECH 모의결과와 수위관측소에서 실측된 실측수위와 비교하여 모형의 적용성을 검토한 결과 $R^2$는 0.990, AME는 0.195, RMSE는 0.252로 높은 상관관계를 보였다. 그리고 검증된 FaSTMECH 모형을 이용하여 태풍 사상 시 홍수터 내에 위치해 있는 캠핑장과 생태공원 등과 같은 친수시설이 침수되는 시간 및 침수심, 침수 유속 및 전단력 등을 분석하였다.

암환자의 고통 측정도구 개발에 관한 연구 (Development of a Tool to Measure Suffering in Patients with Cancer)

  • 강경아
    • 대한간호학회지
    • /
    • 제29권6호
    • /
    • pp.1365-1378
    • /
    • 1999
  • This study is a methodological research study to develop an instrument to measure in patients with cancer and to test the validity and reliability of the instrument. The research procedure was as follows : 1) The first step was to develop conceptual framework based on a comprehensive review of the literature and in-depth interviews with patients with cancer. This conceptual framework was organized in to three dimensions (the intrapersonal dimension, the significant-other and context related dimension, the transcendental dimension). Initially 59 items were adopted. 2) These items were analyzed through the index of content validity(CVI) and 53 items were selected which met more than 80% on the CVI. 3) The pretest was carried out with 87 patients with cancer. After the pretest results were analyzed by item analysis, 44 items were selected. A second test of content validity was conducted and 6 items were eliminated considering the 80% CVI. 4) To test for reliability and validity, data collection was done during the period from January 25, 1999, to February 26, 1999. The subjects for the test were 160 patients with cancer and 185 healthy persons. analysis, item analysis and multitrait-multimethod method to analyze validity. The findings are as follows : 1) The Cronbach's alpha coefficient for internal consistency was .92 for the total 38 items and .79, .82, .85, for the three dimensions in that order. 2) The item analysis was based on the corrected item to total correlation coefficient( .30 or more) and information about the alpha estimate if this item was dropped from the scale. 3) As a result of the initial factor analysis using principal component analysis and varimax rotation, one item was deleted because of factor complexity (indiscriminate factor loadings). In the secondary factor analysis, 7 factors with eigenvalue of more than 1.0 were extracted and these factors explained 56 percents of the total variance. The seven factors were labeled as 'family relationship', 'emotional condition', 'physical discomfort', 'meaning and goal of life', 'contextual stimuli', 'change of body image', 'guilt feelings'. 4) The convergence effect between this instrument and the life satisfaction scale was identified and there was significant positive correlation(r= .52, p= .00). The discriminant validity between this instrument and the depression scale(CES-D) was tested and there was significant negative correlation(r= -.50, p= .00). The instrument for accessing the suffering of patients with cancer developed in this study was identified as a tool with a high degree of reliability and validity. In this sense, this tool can be effectively utilized for assessment in caring for patients with cancer.

  • PDF

복합스터드의 압축 좌굴 거동 (Behavior of Hybrid Stud under Compressive Load)

  • 이상섭;배규웅
    • 한국강구조학회 논문집
    • /
    • 제16권5호통권72호
    • /
    • pp.609-619
    • /
    • 2004
  • 유럽을 중심으로 스틸스터드의 약점으로 지목 받고 있는 열교현상을 억제하기 위한 스터드 개선 연구가 활발히 진행되고 있다. 이 연구는 크게 마감재와 접촉 면적을 줄이는 방법, 웨브면에서 열전달 경로를 늘이는 방법, 열전도성이 낮은 소재를 사용하는 방법, 그리고 스터드를 피복하는 방법으로 구분할 수 있다. 비교적 저층의 주거용 건축물을 대상으로 하는 국외의 경우 에너지 소비에 초점이 맞춰져 있지만, 본 연구의 경우 중층화를 대비하여 구조적 성능도 고려하여 아연도금강판(SGC58)과 FRP를 에폭시로 부착하여 150SL 형태의 복합스터드를 개발하였다. 복합스터드의 소재로는 두께 1.0mm과 1.2mm 강판과 두께 4mm(4ply), 6mm(6ply)의 FRP를 적용하였고, 4가지의 접합 상세에 대한 제작 및 실험을 통해 최종적으로 우수한 결과를 보인 2가지를 선택하였다. 이와 같은 과정을 거쳐 개발된 복합스터드의 압축 성능을 확인하기 위해 2가지 접합 상세에 대해 단면 높이인 150mm에 대해 3, 6, 9, 12배 길이에 대해 압축 실험을 계획하였고, 기존 스틸 스터드와 비교하기 위하여 동일 형태의 비교 실험체도 제작하였다. 실험결과, 복합스터드의 최대하중은 강판 두께 1.0mm인 경우 동일 두께의 스틸 스터드보다 평균 1.62배, 1.2mm인 경우 평균 1.46배 증가하였으며, 가력 종료 시점에 이르기까지 일체 거동을 보여 구조적으로 우수함이 입증되었다.

횡력을 받는 넓은 보-기둥 내부 접합부의 거동 평가 (Behavior of Wide Beam-Column Interior Joint with Slab)

  • 이범식;박성식;박지영
    • 토지주택연구
    • /
    • 제3권4호
    • /
    • pp.433-449
    • /
    • 2012
  • 횡력을 받는 넓은 보와 기둥 내부접합부의 거동을 평가하기 위하여 넓은 보-기둥 접합부의 휨강성비와 유효폭 및 슬래브 유무를 변수로 6개의 1/2축소 모델 실험체를 제작하여 구조성능 평가를 수행하여 하중-변형, 연성, 강성 등을 평가하였다. 동 모델을 대상으로 비탄성해석을 수행하여 구조성능평가 결과와 비교하였다. 연구결과 도출된 결론은 다음과 같다. 넓은 보-기둥 내부 접합부는 중진지역인 국내에서 적용하고 있는 부분골조형 구조에 적용이 가능한 것으로 판단된다. 슬래브의 강성이 횡력을 받는 넓은 보-기둥 내부 접합부의 거동에 영향을 미치는 것으로 나타났다. 휨강성비가 2.0이상의 경우 T형보의 플랜지로서 슬래브 유효폭은 넓은 보 유효깊이의 2.0d로 평가되며, 휨강성비가 1.4~2.0일 경우, 슬래브 유효폭의 영향은 고려하지 않아도 되는 것으로 나타났다.

대조차 만리포 해안의 지상 LiDAR와 MBES를 이용한 정밀 지형/수심 측량 및 조간대 접합을 통한 정밀 지형도 작성 (Construction of High-Resolution Topographical Map of Macro-tidal Malipo beach through Integration of Terrestrial LiDAR Measurement and MBES Survey at inter-tidal zone)

  • 심재설;김진아;김선정;김상익
    • 한국해안·해양공학회논문집
    • /
    • 제22권1호
    • /
    • pp.58-66
    • /
    • 2010
  • 본 논문에서는 지상 LiDAR 및 MBES(다중빔 음향측심기)를 이용하여 정밀 지형 및 수심측량을 실시하였고, 조간대 영역의 육도-해도 접합을 통하여 대조차 해안인 만리포에 대한 정밀 지형도를 작성하였다. 제한된 시간내에 조간대 영역의 충분한 지형정보 획득을 위하여 간조시 지상 LiDAR 및 DGPS를 차량지붕에 탑재하여 이동 정지 스캐닝의 해변 전체의 지형정보를 획득하였고, 이와 동시에 만조시 MBES를 통하여 수심측량을 실시하였으며 조위계 설치와 목측을 통한 조위관측의 병행을 통하여 수심보정자료 및 만리포의 평균해면 추산자료로 사용하였다. 조간대 정합을 위해 지형 및 수심자료의 수직좌표계 기준면은 인천 평균해면으로 단일화하였으며, 조간대 평균 중첩오차는 약 2~6 cm 이내로 나타났다. 또한 지상 LiDAR 자료의 정확도 검증을 위해 RTK-DGPS 측량을 동시에 실시하여 수직좌표값을 비교한 결과 평균 제곱근 오차가 약 4~7 cm 이내로 나타났다. 정밀지형도 작성은 GIS 기반 자료처리를 통하여 50 cm 해상도를 갖는 수치표고자료로 생산하였으며, 이는 현재 연안지역 침수범람 예측을 위한 폭풍해일 침수범람 예측모델의 정밀 입력자료로 사용되고 있다. 또한 장기간에 걸친 주기적 측량 자료와 측량시의 인위적 해변 변화량 및 해양환경정보를 함께 고려하여 3차원 공간분석을 실시한다면 침 퇴적양의 정확한 산출을 통하여 연안 모니터링에도 효과적으로 활용될 수 있을 것이다.

고속도로 절·성토 비탈면 녹화 공법의 적용 실태 연구 (An Analytical Study on the Revegetation Methods for Highway Slopes)

  • 김남춘;송호경;박관수;전기성;이상화;이병준
    • 한국환경복원기술학회지
    • /
    • 제10권2호
    • /
    • pp.1-15
    • /
    • 2007
  • A variety of revegetation methods are being utilized and developed. However, most of revegetation methods used on highway slopes in Korea are based on foreign-introduced plant varieties to stabilize road surfaces and to administer afforestation for surface covering at an earlier phase. Therefore. it results in various problems. such as failure to achieve harmony with the surrounding vegetation and 10 cause re-denudation of slopes as the foreign-in introduced plant varieties wane out from 2~3 years after hydro-seeding, etc. In addition, some of the revegetation plants seeded in the earlier phase grow excessively high, thus causes successional problems, such as to inhibit the invasion of the secondary vegetation from the surrounding areas, etc. Therefore, in this study, 160 slopes located in the nationwide express highways have been investigated and analyzed in order to produce basic data for restoration of ecological environment in slopes created on a long-term basis by investigating and analyzing locational characteristics of cut and filled slopes in express highways, status of revegetation methods, characteristics of soil and plant-ecological environment. 1. Investigation on cut and embanked slopes in express highways was carried out in the total of 160 locations, which include 108 cut slopes and 52 embanked slopes. As a whole, the most frequently used revegetation method was seed spray, which was found to be used in the total of 55 target slops investigated. 2. Planting method of Wistaria floribunda applied to some of the blasted rock zones was found to cause damages as Wistaria floribunda trailed up the surrounding vegetation and the secondary invaded trees. In order to prevent this, this method must be used only in the lowest parts of large-sized slopes. Also, it will be required to administer continuous management and maintenance in the areas already planted with this plants. 3. The areas of blasted rock and ripping rock slopes were applied with coir net (net + seeding) method. However, many of these areas failed in achieving ground covering. Most areas where revegetation was in progress, they were covered with Eragrostis curvula(Weeping lovegrass) only. In areas with soil, such as decomposition of granite, where afforestation is difficult. In this slopes, soil base must be improved by hrdroseeding with thin-layer vegetation base application methods in order to achieve success in afforestation with native plants. 4. Woody species, rather than herb species, are more helpful in stabilization of slope surfaces. Therefore, it is important to be able to grow and protect woody species on highway slopes. Growth of woody vegetation is most largely influenced by soil depth. Thus, when hydro-seeding woody plants, it is recommended to apply at the upper layer of the slopes, which is capable to sufficiently provide the fundamentals required in plant growth.

항공 벡터 자기이상 자료를 이용한 아오가시마섬(청도)의 자화구조 연구 (Magnetization structure of Aogashima Island using vector magnetic anomalies obtained by a helicopter-borne magnetometer)

  • Isezaski, Nobuhiro;Matsuo, Jun
    • 지구물리와물리탐사
    • /
    • 제12권1호
    • /
    • pp.17-26
    • /
    • 2009
  • 향후 발생할 수 있는 자연재해의 기초 자료 확보를 위해 아오가시마섬 지역의 화산 구조를 연구하였다. 아오가시마섬은 일곱개의 섬이 분포하는 이즈열도의 최남단에 위치하고 있는 화산섬으로 효율직인 탐사를 위하여 헬리콥터를 이용한 항공 벡터 자기이상 탐사를 수행하였다. 일반적으로 화산섬의 자기구조를 연구하기 위해서는 총자기이상을 이용하게 되는데 이는 본질적인 오차를 내포하고 있다. 총자기이상은 물리적 특성을 정확히 반영하지 못하기 때문에 맥스웰방정식이나 라플라스 방정식을 만족하지 못하며, 물리적으로 정확한 해석을 수행하기 어려운 단점을 가지고 있다. 또한, 해석을 위하여 한 방향으로 투영된 총자기이상값을 사용하기도 하여 이 과정에서 발생하는 오차 때문에 해석상의 오류가 발생할 수 있다. 이러한 문제점을 보완하기 위하여 이번 연구에서는 벡터 자기이상값을 직접 측정 하였으며, 이를 이용하여 보다 신뢰성 높은 아오가시마섬의 3차원 자기이상 특성을 연구하였다. 이번 연구의 해석결과를 간단히 정리하면, 1A/m 이하의 자화강도를 보이는 지역은 아오가시마섬 남서쪽에 분포하고 있으며, 그 심도는 1-2 km로 해석되었다. 이러한 낮은 자화강도를 보이는 지역은 화산분기 작용의 특성을 고려할 때, 화산분기 작용이 발생했던 지역으로 생각된다.

관성센서 기반 보행 분석 시스템 구현 (Implementation of Gait Analysis System Based on Inertial Sensors)

  • 조재성;강신일;이기혁;장성호;김인영;이종실
    • 재활복지공학회논문지
    • /
    • 제9권2호
    • /
    • pp.137-144
    • /
    • 2015
  • 본 논문은 하지의 움직임을 측정하고 분석할 수 있는 관성센서 기반 보행분석 시스템에 관한 것이다. 본 시스템 구현을 위해 자이로스코프, 가속도계 및 지자계 신호를 이용한 자세 방위 측정장치 모듈을 일체형으로 개발하였으며, 다수의 모듈을 환자의 분절에 부착하여 공간상에서 각 분절의 방위각을 제공할 수 있도록 하였다. 또한 재활과 관련된 많은 응용에 있어 중요한 생체역학 측정값인 신체 분절간의 관절각을 추출하는 알고리즘을 제안하였다. 개발한 자세 방위 측정장치 모듈의 성능을 평가하기 위하여 3차원 공간상의 변위 및 방위를 밀리미터 해상도로 제공할 수 있는 Vicon을 참조 측정 시스템으로 이용하였으며, yaw와 pitch에서 1.08, 1.72도의 평균 제곱근 오차를 얻을 수 있었다. 보행 분석 시스템의 성능 검증을 위하여 7개의 AHRS 모듈을 하지에 부착하고 고관절, 무릎, 발목에 대한 관절각을 계산하여, Vicon과의 비교 실험을 수행하였다. 실험 결과 본 연구에서 개발한 시스템은 뇌졸중 후 회복단계 동안 사지 및 보행 동작을 실시간으로 분석, 제공함으로서 재활의 효과, 난이도 조절 및 피드백 요소를 제공할 수 있을 것으로 판단된다.

  • PDF

사행하천의 2차원 유속분포 모의를 위한 FaSTMECH 모형의 적용성 검토 (Feasibility Calculation of FaSTMECH for 2D Velocity Distribution Simulation in Meandering Channel)

  • 손근수;유호준;김동수
    • 대한토목학회논문집
    • /
    • 제34권6호
    • /
    • pp.1753-1764
    • /
    • 2014
  • 하천의 흐름장을 모의하는 수치모형들은 연구 및 실무에서 다양한 목적의 유동해석에 광범위하게 활용되어오고 있다. 그러나, 수치모의 결과에 대한 검증은 현장 실측자료의 한계로 수리모형실험이나 매우 제한된 현장자료를 기반으로 수행되어 보다 정밀한 검증이 요구되어 왔다. 특히, 사행하천과 같이 기하학적 구조 및 흐름이 복잡한 형태를 갖는 경우는 수치모형이 얼마나 정확한 유속분포 모의를 할 수 있는지 알기 힘들었다. 최근, 초음파도플러유속계(ADCP) 등 최신 현장 계측기기의 발달로 하천 흐름의 정밀한 유속 및 하상 자료를 매우 효율적으로 측정 가능하게 되었다. 따라서, 기존 수치모형들을 실제 하천에서 공간적으로 정밀하게 측정된 유속자료를 기반으로 성능을 검증할 수 있는 기술적인 기반이 마련되었다고 할 수 있다. 이에 본 연구에서는 사행하천에서 정밀하게 측정된 ADCP 유속 자료를 기반으로 최근 국내에 도입된 FaSTMECH 모형을 대상으로 사행하천의 수위와 유속 분포 모의 결과를 검증하였다. 적용 구간은 한국건설기술연구원 하천실험센터의 폭 6.5 m, 평균수심 0.38 m, 유량 $1.54m^3/s$, 평균유속 0.61 m/s, 만곡도 1.2의 실규모 사행하천이다. FaSTMECH 모형의 적용성을 검토한 결과, 사행수로에 대한 수위 모의는 비교적 잘 일치하는 것으로 나타났으나, 만곡부에서 편향되는 횡방향 유속 분포를 잘 모의하지 못하는 것으로 나타났다.