• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.1054-1057
• /
• 2002

The design and fabrication of Q-band 3-stage monolithic microwave integrated circuit(MMIC) amplifier for WLAN are presented using 0.2$\square$ AIGaAs/lnGaAs/GaAs pseudomorphic high electron mobility transistor (PHEMT). In each stage of the MMIC, a negative feedback is used for both broadband and good stability. The measurement results are achieved as an input return loss under -4dB, an output return loss under -10dB, a gain of 14dB, and a PldB of 17dBm at Q-band(36～44GHz). These results closely match with design results. The chip size is 2.8${\times}$1.3mm$^2$. This MMIC amplifier will be used as the unit cell to develop millimeter-wave transmitters for use in wideband wireless LAN systems.

• International journal of advanced smart convergence
• /
• 제11권3호
• /
• pp.28-35
• /
• 2022

Interference always exists between wireless communication systems used in the same frequency band or adjacent frequency bands. In order to deploy a new wireless communication system such as a 5G system, a new frequency band must be allocated to the system. For this purpose, after analyzing interference between the existing system and the new system, a method of setting a frequency guard band or a minimum separation distance has been used as a passive method to limit the interference effect. This paper presents a wideband RF IRM(Interference Reduction Module) that can actively reduce the influence of interference between wireless communication systems. The wideband RF IRM can reduce the interference effects of 5G signals on satellite signals. The principle and structure of the wideband RF IRM are presented. The wideband RF IRM can suppress approximately 20dB of interference signal in 100MHz bandwidth when only interference signal exists. It also shows that when a 5G interference signal of -45dBm/100MHz and a satellite signal of -55dBm/40MHz exist simultaneously at a center frequency of 3.83GHz, about 15dB of 5G interference signal can be reduced in the frequency range covered by the satellite signal. The experimental results demonstrate that the wideband RF IRM can actively reduce the 5G interference signal on the satellite signal and can be used for the purpose of reducing the interference effect in a similar environment.

• ETRI Journal
• /
• 제41권3호
• /
• pp.277-288
• /
• 2019

VWorld is run by the Ministry of Land, Infrastructure, and Transport of South Korea and provides national spatial information, such as aerial images, digital elevation models, and 3D structural models. We propose herein an open platform for 3D spatial information based on WebGL using spatial information from VWorld. WebGL is a web-based graphics library and has the advantage of being compatible with various web browsers. Our open platform is also compatible with various web browsers. Accordingly, it is easily accessible via the VWorld site and uses the three-dimensional (3D) map program. In this study, we describe the proposed platform configuration, and the requests, management, and visualization approaches for VWorld spatial information data. Our aim is to establish an approach that will provide a stable rendering speed even on a low-end personal computer without a graphics processing unit based on a quadtree structure. We expect that users will be able to visualize 3D spatial information through the VWorld open platform, and that the proposed platform will become the basis for various applications.

• 한국정보통신학회논문지
• /
• 제23권8호
• /
• pp.959-965
• /
• 2019

본 논문에서는 CMOS 65-nm 공정을 이용하여 위성 통신 시스템에서 Ka-band를 지원하기 위한 저잡음 증폭기를 설계하였다. 제안된 저잡음 증폭기는 고이득 모드와 저이득 모드로 구성되어있으며, 입력신호의 크기에 따라 이득을 제어하도록 설계하였다. 전력소모를 줄이기 위해 회로 전체의 공급전압을 1 V 이하로 제한하였으며, 인버터 구조의 이득제어 회로에 대해 기술하였다. 제작된 회로의 크기를 줄이기 위해 3D EM 시뮬레이터를 사용하였으며, 패드를 포함하며 $0.33mm^2$의 면적을 갖는다. 제작된 증폭기는 3 dB 대역폭에서 -7 dB의 이득제어 범위를 가지며 반사계수는 고이득 모드에서 -6 dB, 저이득 모드에서 -15 dB 미만으로 측정되었다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제12권1호
• /
• pp.18-23
• /
• 2012

We propose and implement a single-wire communication protocol for thermal management systems using thin film thermoelectric modules for 3D IC cooling. The proposed single-wire communication protocol connects the temperature sensors, located near hot spots, to measure the local temperature of the chip. A unique ID number identifying the location of each hot spot is assigned to each temperature sensor. The prototype chip was fabricated by a $0.13{\mu}m$ CMOS MPW process, and the operation of the chip is verified.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2019년도 추계학술발표대회
• /
• pp.1162-1163
• /
• 2019

최근 사람들이 쉽고 편하게 컴퓨터 시스템과 상호작용할 수 있는지에 관한 HCI(Human-Computer Interaction)의 연구가 활발하게 진행되고 있다. 이러한 변화에 맞추어, 사각 평면 창을 대체할 차세대 기재 가운데 하나로 떠오른 홀로그램과 사람의 손의 동작을 인식하는 3D 모션 입력장치 립모션(Leap-Motion)을 결합하여 새로운 인터랙션을 제시한다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권12호
• /
• pp.4934-4949
• /
• 2015

The unstable characteristic values of communication signals along with the varying SNR (Signal Noise Ratio) environment make it difficult to identify the modulations of signals. Most of relevant literature revolves around signal recognition under stable SNR, and not applicable for signal recognition at varying SNR. To solve the problem, this research developed a novel communication signal recognition algorithm based on Holder coefficient and cloud theory. In this algorithm, the two-dimensional (2D) Holder coefficient characteristics of communication signals were firstly calculated, and then according to the distribution characteristics of Holder coefficient under varying SNR environment, the digital characteristics of cloud model such as expectation, entropy, and hyper entropy are calculated to constitute the three-dimensional (3D) digital cloud characteristics of Holder coefficient value, which aims to improve the recognition rate of the communication signals. Compared with traditional algorithms, the developed algorithm can describe the signals' features more accurately under varying SNR environment. The results from the numerical simulation show that the developed 3D feature extraction algorithm based on Holder coefficient cloud features performs better anti-noise ability, and the classifier based on interval gray relation theory can achieve a recognition rate up to 84.0%, even when the SNR varies from -17dB to -12dB.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권3호
• /
• pp.1057-1073
• /
• 2015

In this paper, we consider cooperative D2D communications in cellular networks. More precisely, a cellular user leases part of its spectrum to facilitate the D2D communication with a goal of improving the energy efficiency of a D2D pair. However the D2D pair is untrusted to the cellular user, such resource sharing may result in the information of this cellular user unsecured. In order to motivate the cellular user's generosity, this D2D pair needs to help the cellular user maintain a target secrecy rate. To address this issue, we formulate a joint spectrum and power allocation problem to maximize the energy efficiency of the D2D communication while guaranteeing the physical layer security of the cellular user. Then, a theorem is proved to indicate the best resource allocation strategy, and accordingly, an algorithm is proposed to find the best solution to this resource allocation problem. Numerical results are finally presented to verify the validity and effectiveness of the proposed algorithm.

• 한국컴퓨터정보학회논문지
• /
• 제27권10호
• /
• pp.95-103
• /
• 2022

5G 이동통신 서비스가 점차 확대되어감에 따라 P2P 또는 D2D 응용에서 유튜부 비디오 스트리밍과 같은 트래픽 지향의 스트림 제어가 중요한 기술로 떠오르고 있다. 특히 D2D 통신에서 사용자들이 가장 많이 전송하는 데이터 스트림의 타입은 비디오 스트림이며, 이것은 대용량의 전송 스트림의 특징을 가지고 있다. D2D 통신환경에서 이런 종류의 스트림은 트래픽 혼잡의 원인을 제공할 뿐만 아니라 또한 DUE들 간의 서비스 품질을 저하시킨다. 본 논문에서는 비디오 스트림과 같은 동적 미디어 스트림의 끊김현상을 최소화하고 스트리밍 서비스 품질을 최적화하기 위해 TOSS 기법을 제안한다. 제안된 기법은 5G gNB 환경하의 3.5GHz와 28GHz의 대역폭상에서 미디어 스트림의 특성과 트래픽 타입을 분석하여 미디어 스트림을 스케줄링한다. 우리는 시뮬레이션을 통하여 제안된 기법의 성능을 알아보며, 시뮬레이션 결과는 제안된 기법이 다른 비교 기법들에 비해서 성능이 보다 우수함을 보인다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2017년도 춘계학술발표대회
• /
• pp.1037-1038
• /
• 2017

최근 급성장하는 로봇의 발달과 생체인식의 개발에 따라 패턴 인식기술 또한 급속히 발전하고 있으며, 그 범위가 2D에서 3D까지로 확장되고 있다. 3D 패턴인식은 기존 2D 패턴인식의 문제점을 해결하여 여러 각도에서는 인식되지 못했던 물체와 생체를 3D적으로 인식한다. 본 논문에서는 다양한 종류의 3D 패턴인식을 이용한 기술 현황을 알아본 후 그 전망을 소개한다.