• Journal of Broadcast Engineering
• /
• v.13 no.5
• /
• pp.677-680
• /
• 2008

In this paper, a new orthogonal frequency division multiplexing (OFDM) with 3-dimensional (3-D) signal mapper is proposed. Here, the signal mapper consists of signals on the surface of Poincare sphere. If the signal points are uniformly distributed and normalized to have the same average power, the minimum Euclidean distance of a 3-D constellation is much larger than that of a 2-D constellation. Computer simulation shows that the proposed OFDM has much improved error performance as compared with the conventional system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.8
• /
• pp.709-716
• /
• 2016

In this paper, A duplexer module with temperature-insensitive electrical characteristics was proposed for remote wireless communication system. Duplexer modules are required to have performances of low insertion loss, high isolation between transmitted band and received band, harmonic suppression as well as high power durability in the system for transmitting guided information to missile flying a free space on the ground. The proposed duplexer module are consist of transmission bandpass filter and receiving bandpass filter which are connected to common antenna port, planar coupler for output power monitoring and low pass filter for harmonic attenuation of power amplifier and coaxial cavity resonator. The material and dimensions of the resonator are determined for minimum frequency shift by temperature variation using 3D EM simulation. The measured results of the prototype showed a good agreement with the simulation results, and it should be well applied not only for guided weapon systems but also for any other communication systems such as remote radio head.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.7C
• /
• pp.617-623
• /
• 2005

In this paper, new space-time block codes achieving full rate and full diversity for QAM and quasi-static Rayleigh fading channels when using 3 transmit antennas are proposed. These codes are constructed by serially concatenating the constellation rotating precoders with the Alamouti scheme like the conventional A-ST-CR code Computer simulations show that all of the proposed codes achieve the coding gains greater than the existing ST-CR code, in which the best has approximately 1.5dB and 3dB larger coding gains than the ST-CR code for QPSK and 16-QAM, respectively, at average SER= 10$^{-5}$.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.286-288
• /
• 2007

In this paper, the fast locking PLL Frequency Synthesizer with low phase noise in a 0.18um CMOS process is presented. Its main application IS for the 915MHz ISM band wireless transponder upon the CPFSK (Continuous Phase Frequency Shift Keying) modulation scheme. Frequency synthesizer, which in this paper, is designed based on self-biased techniques and is independent with processing technology when damping factor and bandwidth fixed to most important parameters as operating frequency ratio, broad frequency range, and input phase offset cancellation. The proposed frequecy synthesizer, which is fully-integrated and is in 320M $^{\sim}$ 960MHz of the frequency range with 10MHz of frequency resolution. And its is implemented based on integer-N architecture. Its power consumption is 50mW at 1.8V of supply voltage and core area is $540{\mu}m$ ${\times}$ $450{\mu}m$. The measured phase noises are -117.92dBc/Hz at 10MHz offset, with low settling time less than $3.3{\mu}s$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.9
• /
• pp.1165-1171
• /
• 2020

In this study, we designed a single antenna taking into account the performance, such as return loss and radiation pattern, of 28 GHz and 38 GHz array antennas for 5G mobile devices. In millimeter wave band communication, high path loss occurs between transmission and reception, unlike in conventional microwave bands. In the design of array antennas for 5G millimeter wave terminals, antenna performance such as antenna gain, bandwidth, isolation between antenna elements, side-lobe level(SLL), etc. should be further considered. The performance of the designed array antennas was analyzed by spacing the antenna elements at half a wavelength. Our results proved the validity of the design and its suitability for applications in mm-Wave by showing that the 28 GHz and 39 GHz array antennas had antenna gains of 13.5 dBi and 11.3 dBi and return losses below -18.4 dB and -20 dB, correspondingly.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.7
• /
• pp.26-31
• /
• 2005

In this paper, a small BPF(band pass filter) is designed using new probe type for wireless communication system. The dielectric resonator is used high Q ceramics for low loss characteristic. In order to provide a band pass filter which can be reduced in dimension, can be reduced in height, and can be surface-mounted. The filter was fabricated using $TE_{01{\delta}}$ mode dielectric resonator. The input/output probes are attached to coner portion of the rectangular metal cavity. Results of the manufactured filter($12{\times}12{\times}8[mm]$) show that the center frequency is 9.95358[GHz], the insertion loss is -1.9[dB], the 3[dB]_bandwidth is 14.9[MHz], and the loaf Q is 664.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.3
• /
• pp.302-311
• /
• 2014

In this work, a FTTL (fishbone-type transmission line) structure was fabricated on PES (polyether sulfone) for a realization of transparent flexible wireless communication device, and its RF characteristics were investigated. According to the results, the FTTL on PES showed a short wavelength characteristic compared with conventional coplanar waveguide. Concretely, the wavelength of the FTTL was 2.23 mm at 50 GHz, which was 56.6 % of the conventional coplanar waveguide. According to the bandwidth extraction result, the passband of the FTTL on PES was 608 GHz. Unlike conventional periodic structures, the characteristic impedance of the FTTL on PES showed a very low frequency dependency, which means that the FTTL on PES can be used for application to transmission line and distributed passive components with a broadband operation frequency.

• Journal of electromagnetic engineering and science
• /
• v.10 no.1
• /
• pp.1-5
• /
• 2010

A spurious suppressed bandpass filter is proposed and discussed using the stepped impedance resonator(SIR) on a substrate-integrated waveguide(SIW) structure with a double-layer substrate. The second resonance of the fundamental $TE_{10}$ mode can be controlled by adjusting the electrical length and impedance ratio of each SIR. The spurious suppressed SIW bandpass filter shows the measurement results of the insertion loss of 3.98 dB and return loss of less than 11.58 dB at the center frequency of 12 GHz. Also, the second spurious frequency is improved to about $1.5f_0$ compared with $1.33f_0$.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.1
• /
• pp.112-115
• /
• 2016

This paper demonstrates a scalp-implantable miniaturized antenna at the medical implant communication service (MICS) (402-405MHz) band. The antenna size is only $27.63mm^3$($8.5mm{\times}6.5mm{\times}0.5mm$), which is the smallest antenna for the MICS band. Miniaturization is achieved by using a symmetrical serpentine shaped radiating patch and placing open-end slots in the ground plane. In addition, co-axial feeding is used for excitation with a shorting pin connected between the radiator and ground. The antenna was simulated in a homogeneous skin model and in the human scalp. An experimental prototype of the proposed antenna was fabricated and measured in a skin-mimicking gel. Good agreement was obtained between the measurement and simulation results, showing a broad bandwidth of 49 MHz (from 395 to 444 MHz) for |S11| less than -10 dB and a maximum gain of -42.87 dBi. This gain is higher than the previous MICS antenna with respect to antenna size.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.5-6
• /
• 2008

With the continued evolution of third-generation cellular systems and the introduction of 3GP P LTE, there is considerable progress for the new mobile wireless markets. Recently, 3GPP LTE standards are accelerated by mobile operators supporting LTE deployment and special working groups such as LSTI are working for LTE IOT and trials. In this paper, we introduce the current status of LTE activities in the mobile communications industry.