• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권3호
• /
• pp.1418-1433
• /
• 2019

In computer graphics, 3D mesh segmentation is a challenging research field. This paper presents a 3D mesh model segmentation algorithm that focuses on removing exterior salient parts from the original 3D mesh model based on prominent feature points and marching plane. To begin with, the proposed approach uses multi-dimensional scaling to extract prominent feature points that reside on the tips of each exterior salient part of a given mesh. Subsequently, a set of planes intersect the 3D mesh; one is the marching plane, which start marching from prominent feature points. Through the marching process, local cross sections between marching plane and 3D mesh are extracted, subsequently, its corresponding area are calculated to represent local volumes of the 3D mesh model. As the boundary region of an exterior salient part generally lies on the location at which the local volume suddenly changes greatly, we can simply cut this location with the marching plane to separate this part from the mesh. We evaluated our algorithm on the Princeton Segmentation Benchmark, and the evaluation results show that our algorithm works well for some categories.

• 한국수산과학회지
• /
• 제32권4호
• /
• pp.466-469
• /
• 1999

전세계의 담수역에 널리 분포하는 Daphnia나 Moins와 같은 담수산 물벼룩은 잉어, 붕어, 금붕어와 같은 담수어의 종묘 생산과정에서 먹이 생물로서 널라 이용되고 있다. 그러나, 해산어의 종묘 생산 과정에서는 안정 배양, 대량 배양이 어렵다는 이유로 로티퍼나 알테미아 이외에 널리 이용되는 먹이 생물은 거의 없다. 이 연구에서는 해산 물벼룩보다는 비교적 배양이 용이한 기수산물벼룩 D. celebensis의 배양 용기의 크기가 안정배양에 미치는 영향을 검토하였다. 종 보존 배양 수준의 40ml 배양에서는 16일간의 배양 기간중 14일째에 최고 밀도가 3.416$\pm$0.396 ind./ml에 달하였다 1,500ml와 15,000ml의 준 대량 배양에서는 각각 배양 개시후 12일째와 21일 째에 14.2$\pm$2.122 ind./ml와 2.489$\pm$1.618 ind./ml의 최고 밀도가 관찰되었다. 그리고 실험 기간중 배양의 안정도를 평가하기 위하여 실시한 세가지 배양 수량간 상대적 개체군 증식 지수 (RPGI)의 비교 결과에서는 1,500ml의 배양 용기에서 가장 안정적인 증식양상을 보였다. 뿐만 아니라, 매일 수확 가능한 기수산 물벼룩 D. celebensis의 개체수를 계산한 결과에서도 (possible harvesting number/ind./ml/day) 1,500ml의 배양 용기에서 가장 높은 3.567$\pm$0.607ind./ml/day가 수확 가능하였다. 한때 필요성에 의하여 담수산 물벼룩을 해산어의 종묘생산 과정에서 먹이생물로 이용한 시기가 있었다. 그러나, 앞으로는 기수산 물벼룩을 해수에서 배양하여 해산 자치어의 먹이생물로 이용할 수 있을 것이다.

• 환경위생공학
• /
• 제16권1호
• /
• pp.18-26
• /
• 2001

The increase of economic growth has brought out the noise pollutions in city regions. To evaluate these problems, this study was investigated to assessment and analysis of noise pollutions at Cheongju area in winter and summer seasons. The noise levels were measured and analyzed at the general areas the 4 roadside areas (park, residential, commercial, and industrial area). As a result, following facts have been found. The equivalent sound levels(Leq) at general are in winter were 51.3∼78.2 dB(A) at the daytime and 41.1∼63.1 dB(A) at the nighttime And in summer there were 53.5∼77.3 dB(A) at the daytime and 41.9∼64.0 dB(A) at the nighttime, respectively. These values were higher than average value of Korea. At the roadside area, the values of Leq were 51.9∼72.8 dB(A) at the daytime, 44.3∼68.2 dB(a) at the nighttime in winter, and in summer there were 62.5∼73.1 dB(A) at the daytime and 50.4∼68.3 dB(A) at the nighttime, respectively. These values were lower than average value of Korea. The calculated traffic noise index(TNI) were 64.6∼93.6 at the daytime and 26.5∼106.6 at the nighttime in winter, In summer, there were 65.0∼90.7 at the daytime, and 32.3∼91.8 at the nighttime. The TNI values varied wide ranges at the nighttime according to traffic volumes.

• Journal of Computing Science and Engineering
• /
• 제6권1호
• /
• pp.1-11
• /
• 2012

Computed tomography (CT) images are widely used for the analysis of the temporal evaluation or monitoring of the progression of a disease. The follow-up examinations of CT scan images of the same patient require a 3D registration technique. In this paper, an automatic and robust registration is proposed for the rigid registration of 3D CT images. The proposed method involves two steps. Firstly, the two CT volumes are aligned based on their principal axes, and then, the alignment from the previous step is refined by the optimization of the similarity score of the image's voxel. Normalized cross correlation (NCC) is used as a similarity metric and a downhill simplex method is employed to find out the optimal score. The performance of the algorithm is evaluated on phantom images and knee synthetic CT images. By the extraction of the initial transformation parameters with principal axis of the binary volumes, the searching space to find out the parameters is reduced in the optimization step. Thus, the overall registration time is algorithmically decreased without the deterioration of the accuracy. The preliminary experimental results of the study demonstrate that the proposed method can be applied to rigid registration problems of real patient images.

• ETRI Journal
• /
• 제44권6호
• /
• pp.1034-1046
• /
• 2022

The learning-based multiview stereo (MVS) methods for three-dimensional (3D) reconstruction generally use 3D volumes for depth inference. The quality of the reconstructed depth maps and the corresponding point clouds is directly influenced by the spatial resolution of the 3D volume. Consequently, these methods produce point clouds with sparse local regions because of the lack of the memory required to encode a high volume of information. Here, we apply the atrous spatial pyramid pooling (ASPP) module in MVS methods to obtain dense feature maps with multiscale, long-range, contextual information using high receptive fields. For a given 3D volume with the same spatial resolution as that in the MVS methods, the dense feature maps from the ASPP module encoded with superior information can produce dense point clouds without a high memory footprint. Furthermore, we propose a 3D loss for training the MVS networks, which improves the predicted depth values by 24.44%. The ASPP module provides state-of-the-art qualitative results by constructing relatively dense point clouds, which improves the DTU MVS dataset benchmarks by 2.25% compared with those achieved in the previous MVS methods.

• 대한방사선기술학회지:방사선기술과학
• /
• 제35권4호
• /
• pp.327-333
• /
• 2012

직장과 방광 장기의 내부공간을 뺀 나머지 실질적 용적에 얼마큼의 방사선이 조사되는지를 묘사방법에 따라 직장과 방광의 볼륨에 따른 흡수선량을 dose-volume histogram(DVH)를 이용하여 선량을 비교 분석 하였다. 자궁경부암 환자 중 고선량률 근접치료기를 이용하여 치료 받는 13명(tandem and ovoid used 13명)을 대상으로 강내치료계획은 외부방사선치료(50.4 Gy)가 끝난 후 수립되었으며 모든 환자에 컴퓨터 단층촬영(computed tomography, CT) 모의치료가 시행되었고 치료계획장비는 PLATO BPS v13.7를 이용하여 3D plan을 하였다. 치료계획에서 직장, 방광의 organ outer wall contour(OOWC)와 organ wall contour(OWC)를 묘사 후 ICRU 38에 근거하여 A점에 100 %를 조사하는 치료계획을 수립하였다. 분석방법으로 치료계획장비의 Dose-Volume Histogram(DVH)을 이용하여 직장과 방광의 묘사방법에 따라 0.1 $cm^3$, 1 $cm^3$, 2 $cm^3$, 5 $cm^3$, 10 $cm^3$ 볼륨이 받는 선량을 비교분석 하였고, 장기의 평균볼륨, 최대볼륨, 최소볼륨을 비교하였다. 방광의 OOWC의 묘사방법에 따른 평균볼륨 202 $cm^3$이며, 최대볼륨은 457 $cm^3$, 최저볼륨은 90 $cm^3$를 나타내고 있으며, OWC의 묘사방법에서 평균볼륨은 35 $cm^3$, 최대볼륨은 66 $cm^3$, 최소볼륨은 20 $cm^3$의 결과를 나타내고 있으며, 방광의 OOWC와 OWC 볼륨에 대한 선량비율(organ outer dose/organ wall dose)은 0.1 $cm^3$에서는 $1.00{\pm}0.01$이고, 1 $cm^3$는 $1.03{\pm}0.03$, 2 $cm^3$는 $1.07{\pm}0.05$, 5 $cm^3$는 $1.22{\pm}0.08$, 10 $cm^3$는 $1.9{\pm}0.23$ 이다. 용적이 증가할수록 차이가 늘어나는 경향이 나타나고 있으며, 2 $cm^3$에서부터 OOWC 묘사방법의 선량과 OWC 묘사방법의 선량 차이가 늘어나는 것을 알 수 있다. 직장에서의 OOWC와 OWC 볼륨의 선량 차이는 0.1 $cm^3$에서는 $1.01{\pm}0.02$이고, 1 $cm^3$는 $1.03{\pm}0.04$, 2 $cm^3$에서는 $1.11{\pm}0.06$, 5 $cm^3$에서 $1.35{\pm}0.17$, 10 $cm^3$에서 $1.78{\pm}0.25$를 나타내고 있다. 마찬가지로 볼륨이 2 $cm^3$에서부터 OOWC의 묘사방법 선량과 OWC 묘사방법의 선량 차이가 늘어나는 것을 알 수 있다. 본 연구는 자궁경부암 환자의 고선량률 근접치료 시 방광과 직장의 볼륨 2 $cm^3$까지 받는 선량이 묘사방법에 따라 일정한 선량을 보이며 그 이상의 볼륨에서는 선량 차이가 증가 하였다. 따라서 임상적으로 나타나는 합병증인 천공과 출혈의 원인을 유추 할 수 있는 선량은 기존에 사용되는 묘사방법으로는 볼륨 2 $cm^3$까지 결과를 사용해야 될 것이다. 하지만 치료계획장비에 사용되는 OWC의 묘사방법이 기존에 묘사방법에 비해 3배~5배 이상의 시간이 소요가 되므로 치료계획장비의 묘사방법의 개선이 이루어진다면 정확한 선량평가 방법이 될 수 있을 것이다.

• 지구물리
• /
• 제9권4호
• /
• pp.371-376
• /
• 2006

고해상도의 디지털 카메라는 근거리 수치사진측량에서 널리 유용하게 사용되고 있으며 점차 활용도가 증가하고 있다. 또한 사진측량 장비의 급속한 발전으로 정밀도가 많이 향상되었고 컴퓨터를 이용한 지형공간정보체계기술의 발달로 더욱 정밀한 3차원 지형의 재현과 면적 및 토공량 산정이 가능하게 되었다. 본 연구에서는 휴대가 간편하고 수치영상의 자체저장능력을 지닌 디지털 카메라를 이용하여 촬영조건의 다양한 변화에 따른 위치오차를 분석하였으며 광속조정을 통하여 높은 정확도의 화소 좌표를 획득하여 3차원 지형의 모델링을 위한 기초 자료로 사용할 수 있도록 하였다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제14권3호
• /
• pp.276-284
• /
• 2022

In this paper, we implemented cloud rendering using WebRTC for high-quality AR and VR services. Cloud rendering is an applied technology of cloud computing. It efficiently handles the rendering of large volumes of 3D content. The conventional VR and AR service is a method of downloading 3D content. The download time is delayed as the 3D content capacity increases. Cloud rendering is a streaming method according to the user's point of view. Therefore, stable service is possible regardless of the 3D content capacity. In this paper, we implemented cloud rendering using WebRTC and analyzed its performance. We compared latency of 100MB, 300MB, and 500MB 3D AR content in 100Mbps and 300Mbps internet environments. As a result of the analysis, cloud rendering showed stable latency regardless of data volume. On the other hand, the conventional method showed an increase in latency as the data volume increased. The results of this paper quantitatively evaluate the stability of cloud rendering. This is expected to contribute to high-quality VR and AR services

• 대한교통학회지
• /
• 제14권3호
• /
• pp.7-26
• /
• 1996

The estimation of real-time Origin-Destination(O-D) parameters, which gives travel demand between combinations of origin and destination points on a urban freeway network, from on-line surveillance traffic data is essential in developing an efficient ATMS strategy. On this need a real-time O-D parameter estimation model is formulated as a parameter adaptive filtering model based on the extended Kalman Filter. A Monte Carlo test have shown that the estimation of time-varying O-D parameter is possible using only traffic counts. Tests with field data produced the interesting finding that off-ramp volume predictions generated using a constant freeway O-D matrix was replaced by real-time estimates generated using the parameter adaptive filter.

• Radiation Oncology Journal
• /
• 제34권2호
• /
• pp.145-155
• /
• 2016

Purpose: Radiation therapy targeting axilla and groin lymph nodes improves regional disease control in locally advanced and high-risk skin cancers. However, trials generally used conventional two-dimensional radiotherapy (2D-RT), contributing towards relatively high rates of side effects from treatment. The goal of this study is to determine if three-dimensional conformal radiation therapy (3D-CRT), intensity-modulated radiation therapy (IMRT), or volumetric-modulated arc therapy (VMAT) may improve radiation delivery to the target while avoiding organs at risk in the clinical context of skin cancer regional nodal irradiation. Materials and Methods: Twenty patients with locally advanced/high-risk skin cancers underwent computed tomography simulation. The relevant axilla or groin planning target volumes and organs at risk were delineated using standard definitions. Paired t-tests were used to compare the mean values of several dose-volumetric parameters for each of the 4 techniques. Results: In the axilla, the largest improvement for 3D-CRT compared to 2D-RT was for homogeneity index (13.9 vs. 54.3), at the expense of higher lung $V_{20}$ (28.0% vs. 12.6%). In the groin, the largest improvements for 3D-CRT compared to 2D-RT were for anorectum $D_{max}$ (13.6 vs. 38.9 Gy), bowel $D_{200cc}$ (7.3 vs. 23.1 Gy), femur $D_{50}$ (34.6 vs. 57.2 Gy), and genitalia $D_{max}$ (37.6 vs. 51.1 Gy). IMRT had further improvements compared to 3D-CRT for humerus $D_{mean}$ (16.9 vs. 22.4 Gy), brachial plexus $D_5$ (57.4 vs. 61.3 Gy), bladder $D_5$ (26.8 vs. 36.5 Gy), and femur $D_{50}$ (18.7 vs. 34.6 Gy). Fewer differences were observed between IMRT and VMAT. Conclusion: Compared to 2D-RT and 3D-CRT, IMRT and VMAT had dosimetric advantages in the treatment of nodal regions of skin cancer patients.