• Journal of the Korea Fashion and Costume Design Association
• /
• v.26 no.2
• /
• pp.33-43
• /
• 2024

This study comprehensively analyzes previous research comparing the similarities between 3D virtual and actual fittings, and identifies the current usage and limitations of virtual fitting programs. The findings reveal that, in most cases, 3D virtual fittings are not perfect substitutes for actual fittings. To address these limitations, this research focuses on the Hohenstein fitting test and BP-ANNs-based garment fit evaluation method, which incorporate various parameters, such as the correlation between wearers and garments, garment pressure, and ease, thus providing objective data, such as data acquired that can enhance subjective evaluations. By integrating such objective assessments, the study suggests potential improvements in virtual fitting accuracy. This research is expected to provide foundational data necessary for the development of a consumer virtual fitting systems alongside advancements in 3D virtual fitting technology.

• Fashion & Textile Research Journal
• /
• v.17 no.3
• /
• pp.421-428
• /
• 2015

This research is to understand customer satisfaction with virtual fitting based on a 3D body scanner and avatars as well as differences between avatars and the 'real me'. To this end, this research examined Korean college students to facilitate 3D body scanning, avatar generation and surveys. The author used 3D body scan data with direct measurements to identify differences between the 3D body scan data-based 'my avatar' and 'real me' in the virtual dress fitting system. The survey results on 'the level of customer awareness on 3D body scanner' found that the majority of both genders did not know about it and indicated a lower usability to incorporate IT technology into the fashion industry. The question in the 3D body scanning and avatar found an affirmative attitude. Satisfaction levels on the 3D avatars' similarity with 'own body' and garment fitting were positive and indicated a need for further technological improvements to express the avatars identical to customers' own body. More research is necessary for the accuracy of sizes for 3D body scanning that measure body sizes while wearing clothes. Avatars based on such datamay be less similar to 'own body' and cause customer dissatisfaction. Thus, further technology development is required to narrow gaps using data to make avatars that provide more accurate virtual fitting simulation services to customers.

• Journal of Digital Contents Society
• /
• v.11 no.3
• /
• pp.299-306
• /
• 2010

According to development of Internet and computer graphics technology, Digital fashion technology makes virtual fitting service capable by reappearing of clothes in 3D. In this paper, We suggest that combined solution which you could use virtual fitting service with various device. For example, imaginary mirror(such as digital information display), pc, mobile in different situations such as store, internet shopping market, commercial. Users can experience imaginary mirror that is located in store or 3D virtual fitting service for digital fashion in internet shopping market, mobile application. In addition, We proposed the solution that user can send experienced virtual fitting service results to other person by image file form of MMS.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.47 no.1
• /
• pp.123-136
• /
• 2023

To develop smart sportswear capable of measuring biometric data, we created a close-fitting pattern using two- and three-dimensional (2D and 3D, respectively) methods. After 3D virtual fitting, the tightness of each pattern was evaluated using image processing of contact points, mesh deviation, and cross-sectional shapes. In contact-point analysis, the 3D pattern showed high rates of contact with the body (84.6% and 93.1% for shirts and pants, respectively). Compared with the 2D pattern, the 3D pattern demonstrated closer contact at the lower chest, upper arm, and thigh regions, where electrocardiography and electromyography were primarily carried out. The overall average gap was also lower in the 3D pattern (5.27 and 4.66 mm in shirts and pants, respectively). In the underbust, waist, thigh circumference, and mid-thigh circumference, the cross-section distance between clothing and body was showed a statistically significant difference and evenly distributed in the 3D pattern, exhibiting more closeness. The tightness and fit of the 3D smart sportswear sensor pattern were successfully evaluated. We believe that this study is critical, as it facilitates the comparison of different patterns through visualization and digitization through 3D virtual fitting.

• Fashion & Textile Research Journal
• /
• v.23 no.2
• /
• pp.247-260
• /
• 2021

While it is an important element of clothing construction, research has so far been very limited on the similarities between virtual and real clothing in terms of the type of neckline. The purpose of this study is to verify the similarity, accuracy of virtualization, and actuality of neckline, which all play an important role in individual impressions and image formation, and require considerable modification when fitting real samples. A total of 5 neckline models were selected through the analysis of dress composition textbooks. The selected designs were then planned and manufactured in muslin. The specimen clothes were then tested on a female model in her 20s. 2 kinds of virtual bodies were created in order to compare the real and the virtual dressing. The first virtual body was made through an Artec 3D Eva scan of the model, and the other was made by entering the model's measurements in a CLO 3D program. A visual image of the front, side, and back image of both the real and virtual dressing were subsequently collected. The collected images were then evaluated by 20 professional fashion workers who checked the similarity between the real and the virtual versions. The current study found that the similarity between the actual and virtual wearing of the five neckline designs with reality appeared higher with the virtual wearing image using the 3D-scanned body. The results of this study could provide further information on the selection of appropriate avatars to clothing companies that check the fit of clothing by utilizing 3D virtualized programs.

• Textile Coloration and Finishing
• /
• v.35 no.2
• /
• pp.107-120
• /
• 2023

The purpose of this study was to analyze the patterns of D level protective clothing, improve their ease of movement by modifying the patterns, and validate the effectiveness of the improvements through 3D virtual fitting and subjective wearing evaluations. Based on previous studies that identified numerous complaints, the patterns of the neck, armpit, and waist areas were modified, resulting in the development of new patterns. To compare and analyze the improved protective clothing with the basic protective clothing, stress and strain were examined after 3D virtual fitting. Additionally, to assess the clothing's allowance, the overall distance between the avatar and the protective clothing, as well as the sectional circumference length and distance of each avatar body part, were measured. Furthermore, the improved protective clothing was manufactured, and a subjective wearing evaluation was conducted with ten males in their twenties as participants. The results showed that the improved protective clothing had evenly distributed stress, larger sectional circumference, and lower average cavity distance. The subjective wearing evaluation also revealed that the suit with improved patterns exhibited superior size suitability, reduced pulling sensation in different body parts, and increased ease of movement. In conclusion, this study confirmed that even minimal pattern modifications can enhance the functionality of protective clothing, alleviating discomfort for wearers.

• Journal of Fashion Business
• /
• v.22 no.3
• /
• pp.122-142
• /
• 2018

In the virtual fitting system, the use of a 3D avatar is not a simple garment model, but it should be able to reproduce the size and shape of the customer using a fitting system. Although various virtual fitting systems have their own 3D avatar sizing systems and provide 3D avatars that match the size of the customer, there are limitations in realizing the actual body shape in actual use by the consumer. The purpose of this study is to realize a 3D avatar with excellent size and conformity for customer use. Therefore, this study aims to provide basic data for the formation of a 3D standard avatar of Korean women aged in their 20's, by comparing and analyzing the degree of the consumer user friendly system change of a body type, and the consumer's ability in selecting a consumer representative body type. Based on the survey data of 'Size Korea' conducted from 2004 to 2015 at three times, we examined the change of body shape over 10 years. Then, based on the results of 6th and 7th data, 4 factors of the concurrent body shape change of women of the consumer demographic studied were selected through the use of a factor analysis. Following this analysis, the 4 extracted factors were clustered again and finally released 7 representative body types, which were obtained based on height and weight. The size of each representative figure is derived by the use of a regression analysis, and it is used as a basic data for 3D avatar formation of the virtual fitting system.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.3
• /
• pp.269-281
• /
• 2012

This study investigates the influence of technology readiness, fashion innovativeness, and participation level perception on the acceptance intention of 3D virtual fitting systems. We presented a 3D virtual fitting system with detailed information that was watched by respondents who subsequently completed a research questionnaire. The data were collected from 300 subjects with an age range of 21 to 39 who have experienced Internet shopping. Descriptive statistics, Cronbach's alpha, factor analysis, correlation analysis, and multiple regression analysis were conducted. The results were as follows. First, fashion innovativeness, technology innovativeness, participation level perception, and optimism significantly influenced the acceptance intention. Second, fashion innovativeness, technology innovativeness, participation level perception, and optimism positively influenced the acceptance intention in the male group; however, technology innovativeness, participation level perception, optimism, and insecurity significantly influenced the acceptance intention in the female group. The results indicated that a marketing strategy has to be designed that focuses on consumers with high technology, fashion innovativeness, and optimism to increase the acceptance intention. In addition, markers have to enhance a participation level perception that will contribute to the introduction of 3D virtual fitting systems. Another notable finding was the importance to differentiate marketing strategies according to gender.

• Journal of Korea Multimedia Society
• /
• v.15 no.7
• /
• pp.941-950
• /
• 2012

A virtual garment fitting system which fits the top and bottom of a garment on 3D body data is introduced. This system uses the laser scanned 3D body data and the digital images photographed the front and back of a garment. The digital images are modeled to reflect tensions among particles in the images and the friction and gravity effects are considered in the fitting process to the body data. When a bottom is fitted, a virtual belt to hold the bottom in the waist is introduced since gravity effects pull down it. Also the process for fitting the top and bottom on layers is proposed here. The system has the strengths that it uses only the front and back image of a garment instead of using complicated patterns of a garment, and provides a realistic fit result as a 3D figure. As on-line retailing shop in present displays front and back images of garments, this system also does. However this system provides a differentiated service to user than present retailing shop as showing a 3D fit image. It will make a new trend in online shop retailing of garment.

• Journal of the Korean Society of Costume
• /
• v.66 no.8
• /
• pp.46-60
• /
• 2016

Countries have different brassiere patterns, and this study produced and compared 3/4 brassiere patterns from different countries to determine the difference in patterns, and to investigate the stress distribution and shape of cross section while wearing brassieres using 3D virtual fitting system. Despite the growing interest in underwear, there is a lack of related books and research on brassiere patterns, which causes the difference in sizes and pattern drafting methods by countries. Thus, research on this is needed. 3D virtual fitting system has been introduced to compare patterns, thereby improving visible effects and reducing the loss in cost caused by underwear pattern fitting test. According to the result of pattern analysis, The Secoli type exhibited the least breast cover rate (14.9 cm), while the largest cover rate was shown in Christina and ESMOD types (17.7 cm). It is believed that the difference in pattern drafting causes the difference in the total length of a brassiere. Furthermore, the Secoli, Moda Burgo, and ESMOD brassieres drafted from basic bodice pattern were found to be longer than the Christina and Han Sunmi brassieres attained from direct pattern drafting. Moreover, the darts' volume of upper and lower cups in Christina and Han Sunmi types was similar in shape. The shapes of cradle drafted from basic bodice pattern were a straight line, while those from direct drafting formed a curved shape. In fitting multiple cross sections, the Secoli, Moda Burgo, and ESMOD brassieres had gaps between the brassieres and the body. Among these, the largest number of gaps was observed in the ESMOD type pattern. This study aimed at performing comparative analysis of various brassieres' pattern drafting types as a basic research for developing a brassiere pattern drafting type.