• Geophysics and Geophysical Exploration
• /
• v.5 no.4
• /
• pp.280-290
• /
• 2002

Three-dimensional (3-D) electromagnetic (EM) modeling algorithm has been developed using finite element method (FEM) to acquire more efficient interpretation techniques of EM data. When FEM based on nodal elements is applied to EM problem, spurious solutions, so called 'vector parasite', are occurred due to the discontinuity of normal electric fields and may lead the completely erroneous results. Among the methods curing the spurious problem, this study adopts vector element of which basis function has the amplitude and direction. To reduce computational cost and required core memory, complex bi-conjugate gradient (CBCG) method is applied to solving complex symmetric matrix of FEM and point Jacobi method is used to accelerate convergence rate. To verify the developed 3-D EM modeling algorithm, its electric and magnetic field for a layered-earth model are compared with those of layered-earth solution. As we expected, the vector based FEM developed in this study does not cause ny vector parasite problem, while conventional nodal based FEM causes lots of errors due to the discontinuity of field variables. For testing the applicability to high frequencies 100 MHz is used as an operating frequency for the layer structure. Modeled fields calculated from developed code are also well matched with the layered-earth ones for a model with dielectric anomaly as well as conductive anomaly. In a vertical electric dipole source case, however, the discontinuity of field variables causes the conventional nodal based FEM to include a lot of errors due to the vector parasite. Even for the case, the vector based FEM gave almost the same results as the layered-earth solution. The magnetic fields induced by a dielectric anomaly at high frequencies show unique behaviors different from those by a conductive anomaly. Since our 3-D EM modeling code can reflect the effect from a dielectric anomaly as well as a conductive anomaly, it may be a groundwork not only to apply high frequency EM method to the field survey but also to analyze the fold data obtained by high frequency EM method.

• Korean Journal of Agricultural Science
• /
• v.1 no.1
• /
• pp.91-116
• /
• 1974

Taiwan agricultural development in the last decade has not been changed much since the accomplishment of land reform program. This is mainly due to the rapid development taken place within industry that agricultural development can not keep pace with. The increasing gap of rural-urban income discrepancy has caused socio-psychological unstability among rural people and inspire wants of out-migration. From 1961 to 1970, population of the ten largest cities showed an annual growth rate of 4.05%, while the population of the remainder of Taiwan showed 2.06%. Assuming the natural increase rate of these two population sections are similar, the difference of rural and urban annual growth rate can be at tributed to the flow of people from rural to urban sectors. The main objective of this paper is to identify the amount of agricultural out-migration and its impact on agricultural development and agricultural extension programs. Specifically, the objectives are to examine (1) rural-urban population composition (2) rural out-migration estimation (3) changes of agricultural population, and (4) implications for agricultural development and extension programs Some of the important findings are listed below; (1) The average agricultural out migration of the period 1960-1969 is estimated at around 60,000 per year. Take Tainan prefecture for example, the Male-Female Migration Ratio is 0.39 for age 20-24, 0.55 for age 25-29, 0.90 for 30-34. It is understood between age 20 and 34, the rural female migration rate is higher than the rural male. (2) Based on the population growth rate of 1950-1969, agricultural population is projected for the period of 1953 to 1989. By 1978, the agricultural population will reach its peak and begin to dedaine from 1980. The projected agricultural population in 1989 is 5,847,566 which occupies 29% of the Taiwan total population. (3) Assuming area of cultivated land keep unchanged as 905,263 ha. in 1970, and tif we can eliminate all 72% of part-time farms, then the average farm acreage for hose full-time farms will be increased to 3.6 hactares. This is unlikely to happen before 1989 without the government interference. (4) Less than 10% of adult farmer s of age 25-64 in 1969 enrolled in Farm Discussion Club, only 5% of adult farm women enrolled in Home Economics Club, and 5% of rural youth enrolled in 4-H Club. These statistics show a fact that only few farmers are reached by extension workers. Based on findings in this paper, some important suggestions are listed for future agricultural development. (1) Improve agricultural structure by decreasing agricultural population (a) Encourage farmers with less than 0.5 ha. of land to seek jobs outside of agriculture (b) Encourage joint cultivation and farm mechanization (c) Discourage rural migrants to Keep farm land (d) Provide occupational guidance program through extension education programs (2) Establish future farmers settlement project to assure rural youth have enough resources for farming. (3) An optimum Population policy should be integrated into rural socio-economic development and national development programs.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.22 no.3
• /
• pp.175-184
• /
• 2018

In this paper, comparative analysis of the 9.12 Gyeongju and 11.15 Pohang earthquakes was conducted in order to provide probable explanations and reasons for the damage observed in the 11.15 Pohang earthquake from both earthquake and structural engineering perspectives. The damage potentials like Arias intensity, effective peak ground acceleration, etc observed in the 11.15 Pohang earthquake were generally weaker than those of the 9.12 Gyeongju earthquake. However, in contrast to the high-frequency dominant nature of the 9.12 Gyeongju earthquake records, the spectral power of PHA2 record observed in the soft soil site was highly concentrated around 2Hz. The base shear around 2 Hz frequency was as high as 40% building weight. This frequency band is very close to the fundamental frequency of the piloti-type buildings severely damaged in the northern part of Pohang. Unfortunately, in addition to inherent vertical irregularity, most of the damaged piloti-type buildings had plan irregularity as well and were non-seismic. All these contributed to the fatal damage. Inelastic dynamic analysis indicated that PHA2 record demands system ductility capacity of 3.5 for a structure with a fundamental period of 0.5 sec and yield base shear strength of 10% building weight. The system ductility level of 3.5 seems very difficult to be achievable in non-seismic brittle piloti-type buildings. The soil profile of the PHA2 site was inversely estimated based on deconvolution technique and trial-error procedure with utilizing available records measured at several rock sites during the 11.15 Pohang earthquake. The soil profile estimated was very typical of soil class D, implying significant soil amplification in the 11.15 Pohang earthquake. The 11.15 Pohang earthquake gave us the expensive lesson that near-collapse damage to irregular and brittle buildings is highly possible when soil is soft and epicenter is close, although the earthquake magnitude is just minor to moderate (M 5+).

• The Journal of Fisheries Business Administration
• /
• v.4 no.1_2
• /
• pp.19-57
• /
• 1973

Laver io one of the most necessary and seasonal items in Korean food from oldtimes. Laver is lagely eaten in dried form, and its supply depends entirely upon culture weeds. The history of laver culture in Korea about sixty or seventy years is older than in Japan. Significance of laver culture is divided into two aspects, one is food supply in the nation, and the other is export to other countries. Houses engaged in laver culture are about foully thousands, and laver production in 1972 is estimated as 1, 3 bitten sheets. (1 sheet is a dried laver of 20 cm sq, in the shape of paper) Especcially meaning of layer production is the concentration of labour input, and systematic management of labour. From around 1920, the method of laver culture was introduced by Japanese Imperialism for mono culture in shallow seas, and mass products of laver is provided to Japan market, DOMESTIC MARKET Fundamental consume function calculates at below, $D_{(68_71)}$=16354 $Y^{0.471}$ $P^{-1.0662}$ where D is total layer demand, Y income variable, P price variable. It means income elasticity is 476. in the whole country, and price elasticity is 1, 07. But generally income elasticity is higher in urban area than in rural area, as shown at 1, 3 in Seoul city. Expence of laver in house expenditure is mutually correlated with another expence, See Table 12 about the relative function. See Table 14 and 16 about the relation between the gathering and the changes of price in auction, wholesale and retail price support system is for two effects, one of which is constraint of the upper price, the other is rise of the lower price. Before the system control, the equation in three year average calculated as below, $Y_{b}$ ＝18, 907.7455＋15435.9364 t (r=0.89) where the origin t＝0 is the November and the units are month. Post the system control, $Y_{p}$ =30, 047.9636+1, 631.1721t (r＝0.97) therefore, this system has an effect only on the rise of lower price, Average annual margins of laver products at four market levels according to the consumer spent is below. EXPORTING MARKET Japanese demand function of laver products is, Log D=5, 289+1, 108 Log Y-1, 395 Log P (r=0.987) where D is Japanese laver demand, Y income variable, P price variable. according to which income elasticity is 1. 1 and price elasticity is 1.4. Laver production in 1970 tile highest record till then, is estimated as six billion sheets. But the recent improvement of laver culture techniques, the production of seeds and freezing storage of seeds has been stabilized. Futher new culture farms have been developed by means of break- water fences or by floating culture method. These improvements have been backed up with increased demand of laver products. Import quantity and price of Korean laver products are restrained by three organizations, that is producer, distributor and consumer. This relationship calculated by regression equation shows that import is influenced only producer organization, at the sacrifice of consumer profit. For increase to export of laver products, we urgently require to open foreign trade of laver products for Japanese consumer, .and Japan has political responsibility to solve Korean laver structure. But with long run timeseries, as regards Japanese production and import quantity, importing function shows increasing trend as below, 250 million sheets ＜3, 947.1674+0.005 $L_{g}$ ＞) 600 million sheets where $L_{q}$ is relative production quantity of laver in Japan. (unit; 100 thousand sheets) Our Export effort should be put on the highly processed products whithin the restraind quote.ote.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.2
• /
• pp.127-136
• /
• 2002

DEM(Digital Elevation Model) is used widely in image processing, water resources, construction, GIS, landscape architecture, telecommunication, military operations and other related areas. And it is used especially in producing ortho-photo based on specific DEM and developing 3D GIS database vividly. As LiDAR(Light and Detection And Ranging) system emerged recently, DEM could be developed in urban area more efficiently and more economically, compared to the conventional DEM Production. Traditional method using check points for elevation has tome limitations in structure's height accuracy by LiDAR, because it uses only terrain height. Accordingly after the downtown of Chungju city was selected as a test field in this paper and DEM and digital ortho images was produced by way of LiDar survey, the accuracy was evaluated through analytical plotting map. The result shows that in case of buildings in LiDAR DEM, the accuracy is 0.30 m in X, 0.62 m in Y and RMS is 1.17 m. The difference distribution between DEM and plotting map in range of $\pm$10 cm was 36.2% and $\pm$10 cm $\pm$20 cm was 43.53%. The accuracy of LiDAR in this study meets 1/5,000 which is the regulation for map of NGI(National Geography Institute) and LiDAR can be possibly used in many other applied area.

• Land and Housing Review
• /
• v.5 no.2
• /
• pp.115-120
• /
• 2014

Site coefficient and amplification factor of current domestic Seismic Design Code (KBC-2009) have no consideration for the domestic ground condition in which the base rock is normally placed within 30m form the surface. Accordingly, in this study dynamic centrifugal test and analysis for pile foundation into clay were achieved. and the response spectrums of free surface and basement were compared with each other. Within the period 1sec., the measured spectral acceleration of free surface and basement was bigger than the design spectral acceleration of SC and SD site. However the measured spectral acceleration of free surface and basement for the period over 1.5sec. was smaller than the design spectral acceleration of SC site. There was no severe difference of spectral acceleration according to the upper structure, embedded depth of foundation and free surface conditions. Consequently, normal domestic apartment housing for the period range over 1.5sec. could be design more economically applying these test result.

• Journal of the Korean Geographical Society
• /
• v.31 no.2
• /
• pp.295-308
• /
• 1996

1. Retrospect of Political Geographic Studies since Liberation, 1945 : 1) Period from 1945 to mid 1960s : There was not political geography as a science in Korea at the time of liberation from Japan 1945. At that time were not pure political geographers in Korea. In 1947, Moon-Hwa Pyo, economics professor, published a book titled Outline of Korean Geopolitics. This book was a first one in the field of political geography and available at that time in the logical descriptions. Bok-Hyon Choi was a first political geographer who in 1959 wrote a book titled Political geography for the collegians of Seoul National University. Professor Choi introduced American-style political geography through the book above mentioned. In 1963, Kie-Joo Hyong published an article titled "Korean Unification: Possibility from the Geopolitical Viewpoint" which was a first article published by Korean young scholar who studied geography in this country. 2) Period from late 1960s to late 1980s : Both Yoon Cha and Duck-Soon Im published frequently several articles of political geography or geopolitics respectively in 1968-1969. And they issued geopolitical disputes on Korean geopolitical structure and an application of rimland theory to Korean peninsula in 1969 through a magazine named Joung-Kyong Younku (the political and economic researches). The disputes played an important role of showing political geography (or geopolitics) to political sciences especially international political Science. Active researches still continued in 1970s. In that atmosphere the first Korean book of political geography written by a post-liberation scholar (Duck-Soon Im) titled Principles of Political Geography was published in 1973. This book was influenced much by American political geography after Second World War. In 1980s, the researches continued more actively. Especially administrative districts, capital cities, and sub-capital cities were frequently studied during this period. 3) Period from late 1980s to Present: Recent Studies : 1985 was a year of much production of articles of political geography. The first Ph.D thesis of political geography published in the same year in our country. And since 1985 produced many M.A. articles. Several categories of esearches of political geography was made in the period from late 1980s to present. Capital cities, Korean unification, administrative districts, urban politics, elections, sub-capital cities, and defense walls were important research categories. Reviewing the researches from 1945 to present. I found eight categories of political geography in Korea: capital cities, administrative districts, geopolitical structure of Korean peninsula, division and unification of Korea, sub-capital cities, defense walls, elections, and urban politics. Each category includes several scholars respectiveiy. 2. Study Tasks and Prospects in Korean Political Geography: In relation to Korean circumstances there are three study-tasks. The first task of Korean people is unification of two Koreas. Political geographers of Korea must al survey titled Survey Methods of Human Geography for collegians. This book was first one on survey part in Korea. The book however, is insufficient in comprehensiveness in aspects too. I think that the important tasks of general-synoptic human geography in Korea are \circled1 publication of comprehensive books of human geography in the aspects and methodologies for collegians and \circled2 acceptance of academic world of human geography in Korea of variety in methodologies of human geography for future progress. progress.