• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.510-518
• /
• 2020

With the promotion of digitalization in the construction industry, BIM has become an indispensable technology. On the other hand, it has not been actively utilized in practice because of the difficulty of BIM modeling. The reason is that 3D modeling is less productive not only because of the difficulty of learning BIM software but also the modeling work is done manually. Therefore, this study proposes a method and system that can improve the productivity of BIM-based modeling. For this reason, in the study, a slit caisson, which is a typical structure of a port, was selected as a development target, and various parameters were derived through interviews with experts so that it could be used in practice. This study presents a UI construction plan that considers user convenience for efficient management and operation of diverse and complex parameters. Based on this, this study used visual programming and Excel VBA to develop a BIM-based design automation system for slit caissons. The developed system can use many parameters to quickly develop slit caisson models suitable for various design conditions that can contribute to BIM-based modeling and productivity improvement.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.4
• /
• pp.770-778
• /
• 2013

In this study, a liquid carbonation method was applied for producing precipitate calcium carbonate by liquid-liquid reaction. We recycled the recycling water of ready-mixed concrete, one of construction waste for use source of carbonate ion. A supernatant separated from the recycling water of ready-mixed concrete, as a result of ICP analysis of a cation, $Ca^{2+}$ was contained up to 1100 ppm. We used MEA as a $CO_2$ absorbent for the liquid carbonation. A precipitate $CaCO_3$ was produced at more than MEA 20 wt%. The precipitate $CaCO_3$ as a final product was separated and dried. The result of XRD was confirmed the generation of $CaCO_3$ to calcite structure.

• Journal of Korea Water Resources Association
• /
• v.31 no.3
• /
• pp.291-301
• /
• 1998

The objective of this study is to analyze the characteristics of flow and bed topography with changing bed material in a 180-degree, with constant-radius curved experimental channel. Sand($D_{50}$ = 0.56 mm, s = 2.65) and anthracite($D_{50}$ = 0.26 mm, s = 1.54) were selected as bed materials. The maximum scour depth was found to be about two times for the mean flow depth at the outer bank of bend angle $30^{\circ}~60^{\circ}$, and in case of anthracite, it was found upper part of bend angle $5^{\circ}~15^{\circ}$ than that of sand. Regardless of bed materials the path of maximum streamwise velocity is skewed inwards in the upper part of the bend, the maximum velocity shifts outwards, and it lagged downward as bed roughness increases. The maximum skewed angle of flow grows faster in the smooth bottom than in the rough one, and its value also increases. The secondary flow in anthracite bottom was measured larger than that of sand one, and two cells of secondary flow was found in this experiment.

• Elastomers and Composites
• /
• v.52 no.3
• /
• pp.167-172
• /
• 2017

Ultra-high performance (UHP) tires, for which demand has recently surged, are subject to severe strain conditions due to the low aspect ratio of their sidewalls. It is important to ensure sidewall material durability, since a sudden tire sidewall breakage during vehicle operation is likely to cause a major accident. In the automotive application of rubber parts, cracking is defined as a failure because when cracks occur, the mechanical properties of rubber change. According to Mars, Andre et al., strain and strain energy density (SED) are mainly used as a failure parameters and the SED is generally used as a fatigue damage parameter. In this study, the fatigue life curves of sidewall rubber of tires were determined by using the SED as fatigue damage parameter while the effect of aging on fatigue life was evaluated after obtaining the SED-Nf curves according to aging condition.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.11
• /
• pp.555-561
• /
• 2001

In this paper, the low power (1.5 W) solenoid-type magnetic thin-film transformers utilizing a $Ni_{81}Fe_{19)$ core material were designed and fabricated for 5 MHz-drive DC-DC converter application. The $20\mum$ thick copper films were used as the coils. The transformers fabricated in this work have the sizes of $3.08 mm\times25.5 mm\; and\; 6.15 mm\times12.75 mm.$ The optimum design of solenoid-type magnetic thin film transformers was performed utilizing the conventional equations, a Maxwell computer simulator (Ansoft HFSS V7.0 for PC), and parameters obtained from the magnetic properties of NiFe magnetic core materials. frequency characteristics of inductance, dc resistance (R), coupling factor (k) and gain of developed transformers were measured using HP4194A impedance and gain-phase analyzer. The fabricated transformers with the size of $6.15 mm\time12.75 mm$ exhibit the inductance of $0.83 \muH$, the dc resistance of $2.3\Omega$$\Omega$, the k of 0.91 and the gain of -1 dB at 5 MHz, which show the comparable results to those reported in the recent literatures. The measured high-frequency characteristics for the fabricated transformers agreed well with those obtained by theoretical calculations .

• Natural Product Sciences
• /
• v.14 no.1
• /
• pp.51-55
• /
• 2008

Three sesquiterpene-lignans, eudeshonokiol B (1), eudesobovatol B (2), and clovanemagnolol (3), were isolated from the stem bark of Magnolia obovata, together with magnolol (4), honokiol (5), and obovatol (6) on the basis of spectroscopic and physicochemical analyses including 2D NMR and Mass. Compounds 1 - 3 were belongs to a unique class of natural products made up of a sesquiterpene and biphenyl-type neolignan via an ether bond. All the isolated compounds were tested in vitro for their cytotoxic activity against the HeLa, A549, and HCTll6 cancer cell lines. Compounds 1 - 6 showed the cytotoxic activity against tested cancer cell lines, with $IC_{50}$ values ranging from 7.1 to 14.4 ${\mu}g/mL$.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.4
• /
• pp.37-46
• /
• 1996

In this paper, we analyzed the performance improvement of the DS-CDMA/dPSK cellular mobile communication system with CCI canceller and RAKE receiver techniques in mobile radio channel which is characterized by AWGN, Multi-user interference (mUI) and frequency-selective rayleigh fading. System capacity i.e., number of user per cell has been derived and the evaluated results are shown in figuraes as a function of PN code sequence length, number of RAKE receiver tap, BER and E$_{b}$/N$_{o}$. The voice activity factor is assumed to be 3/8 the number of sectors in a cell 3 and MUI is modeled as gaussian process. From the results, the capacity of the DS-CDMA/DPSK cellular mobile communication system is improved by adopting CCI canceller. When we adopt the RAKE receiver to mitigate the multipath fading, the error performance is improved and the amount of improvement is proportional ot the number of taps L in the case that each tap contains a signal component and the better of improvement can be obtained, the smaller of the SNR difference in each tap. The system capacity is more increased when the CCI canceller and the RAKE receiver is used in cascade.

• Journal of Korean Society for Atmospheric Environment
• /
• v.27 no.4
• /
• pp.379-386
• /
• 2011

Catalyst-assisted plasma system with a DBD (Dielectric Barrier Discharge) reactor was used to remove hydrogen sulfide, which is one of the odorous species in this study. The ${\gamma}-Al_2O_3$ and ${\beta}$-Zeolite catalysts impregnated by Ag, Cu and Mn species were employed as catalysts and their $H_2S$ removal characteristics under plasma irradiation were investigated. From the experimental study, we found that the $H_2S$ removal efficiency increases with decreasing space velocity in the system and increasing specific input energy. Furthermore, ${\beta}$-Zeolite catalysts are efficient to remove $H_2S$ than ${\gamma}-Al_2O_3$ catalysts. Especially, the catalysts impregnated by Ag have higher removal efficiency than other catalysts (Cu, Mn).

• Natural Product Sciences
• /
• v.17 no.1
• /
• pp.1-4
• /
• 2011

Chemical investigations of the stony coral Alveopora japonica Eguchi (Poritidae) resulted in the isolation of four known compounds (1 - 4). The structures of 1 - 4 were identified as a sterol, ergosta-5,24(28)-dien-$3{\beta}$-ol (1), a mixture of monoacyl glycrols (2), eicosanoic acid and tetracosanoic acid, and two nucleosides, thymine (3) and 2'-deoxythymidine (4), respectively, on the basis of spectroscopic and physicochemical analyses including 1D- and 2D- NMR techniques as well as by comparison of their data with the published values. Compounds 1 - 4 were isolated from this species for the first time. Moreover, these compounds (1 - 4) were found in the genus Alveopora and the family Poritidae for the first time.

• Journal of Periodontal and Implant Science
• /
• v.41 no.2
• /
• pp.86-91
• /
• 2011

Purpose: The aim of this study was to analyze the short-term predictability and reliability of Astra Tech implants according to the demographical distribution of patients and condition of implant sites and location of implants. Methods: Among patients treated with Astra Tech implant (Astra Tech AB) in the Department of Periodontology at the Dental Hospital of Yonsei University of College of Dentisry and K Dental Clinic from May 2004 to March 2009, 195 implants in 98 patients which had been restored more than 6 months ago were reviewed in this study. Following data were reviewed from patient charts and implants success rate was examined: 1) patient type and implant location, 2) bone status at the implant site, 3) diameter and length of the placed implants, 4) presence or absence of bone augmentation and types of the augmentation. Results: The results from this study are as follows: 1) most implants were placed in the molar area, especially 1st molar area of maxilla, 2) most implants were placed at $D_2$ and $D_3$ bone type, 3) most implants were placed in areas of B and C bone quantity, 4) autogenous and alloplastic bone graft and artificial membrane were used for placement of 74 implants. Conclusions: Short-term survival rate of Astra Tech implants was 100%.