• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5C
• /
• pp.199-210
• /
• 2012

The effects of tunnelling in weak weathered rock on the behaviour of a pre-existing single pile and pile groups ($3{\times}3$ and $5{\times}5$ pile groups) above a tunnel have been studied by carrying out three-dimensional (3D) elasto-plastic numerical analyses. Numerical modelling of such effects considers the response of the single pile and pile groups in terms of tunnelling-induced ground and pile settlement as well as changes of the shear transfer mechanism at the pile-soil interface due to tunnelling. Due to changes in the relative shear displacement between the pile and the soil at the pile-soil interface with tunnel advancement, the shear stresses and axial pile force distributions along the pile change drastically. Based on the computed results, upward shear stresses are induced up to about Z/L=0.775 from the pile top, while downward shear stresses are mobilised below Z/L=0.775, resulting in a reduction in the axial pile force distribution with depth equivalent to a net increase in the tensile force on the pile. A maximum tensile force of about $0.36P_a$ developed on the single pile solely due to tunnelling, where $P_a$ is the service axial pile loading prior to tunnelling. The degree of interface shear strength mobilisation at the pile-soil interface was found to be a key factor governing pile-soil-tunnelling interaction. Overall it has been found that the larger the number of piles, the greater is the effect of tunnelling on the piles in terms of pile settlement, while changes of the axial pile forces for the piles in the groups are smaller than for a single pile due to the shielding effect. The reduction of apparent allowable pile capacity due to tunnelling-induced pile head settlement was significant, in particular for piles inside the groups.

• Wind and Structures
• /
• v.27 no.1
• /
• pp.11-27
• /
• 2018

The straight-cone steel cooling tower is a novel type of structure, which has a distinct aerodynamic distribution on the internal surface of the tower cylinder compared with conventional hyperbolic concrete cooling towers. Especially in the extreme weather conditions of strong wind and heavy rain, heavy rain also has a direct impact on aerodynamic force on the internal surface and changes the turbulence effect of pulsating wind, but existing studies mainly focus on the impact effect brought by wind-driven rain to structure surface. In addition, for the indirect air cooled cooling tower, different additional ventilation rate of shutters produces a considerable interference to air movement inside the tower and also to the action mechanism of loads. To solve the problem, a straight-cone steel cooling towerstanding 189 m high and currently being constructed is taken as the research object in this study. The algorithm for two-way coupling between wind and rain is adopted. Simulation of wind field and raindrops is performed with continuous phase and discrete phase models, respectively, under the general principles of computational fluid dynamics (CFD). Firstly, the rule of influence of 9 combinations of wind sped and rainfall intensity on flow field mechanism, the volume of wind-driven rain, additional action force of raindrops and equivalent internal pressure coefficient of the tower cylinder is analyzed. On this basis, the internal pressures of the cooling tower under the most unfavorable working condition are compared between four ventilation rates of shutters (0%, 15%, 30% and 100%). The results show that the 3D effect of equivalent internal pressure coefficient is the most significant when considering two-way coupling between wind and rain. Additional load imposed by raindrops on the internal surface of the tower accounts for an extremely small proportion of total wind load, the maximum being only 0.245%. This occurs under the combination of 20 m/s wind velocity and 200 mm/h rainfall intensity. Ventilation rate of shutters not only changes the air movement inside the tower, but also affects the accumulated amount and distribution of raindrops on the internal surface.

• Journal of the Korean Geosynthetics Society
• /
• v.16 no.4
• /
• pp.211-219
• /
• 2017

The spray-applied waterproofing membrane is installed on shotcrete or concrete surface to make impermeable layer with 3-5 mm thick for the purpose of waterproofing. This study aims to determine the internal structure of a spray-applied waterproofing membrane including pores by using X-ray CT technique. Before obtaining X-ray images of the membrane specimens, a waterproof performance test was performed on the membrane specimens with a water pressure of 500 kPa for 28 days. Results show that the movement of moisture is made through micropores. This is based on the fact that the large pores inside the membrane are not saturated and the degrees of saturation of the micropores are high. X-ray image is effective for determining the pore size distribution and whether the membrane with pores contains the water However, it is necessary to pay attention to the determination of water content, since water content may vary depending on the threshold value of X-ray image analysis applied to calculate the water content.

• Journal of Life Science
• /
• v.14 no.6 s.67
• /
• pp.938-950
• /
• 2004

We used portions of mitochondrial 125 ribosomal RNA gene sequences (339 bp) to investigate the phylogenetic and population genetic characteristics of the Japanese anchovy, Engraulis japonicus, in Korean waters. A total of 35 mtDNA haplotypes were obtained from the samples collected in 3 locations (the southern area of the Yellow Sea, the western coast of Jejudo, and the eastern area of the South Sea) in Korean waters. One haplotype, AN8T103, obtained from the southern area of the Yellow Sea, was formed according to an independent phylogenetic individual in the PAUP analysis, which was separated from the others by a $0.2-4.1\%$ sequence divergence. This distinct haplotype appeared to be one that was carried by immigrants from another study area, but further study is necessary. Genetic divergence, except for AN8T103, was moderate to substantial $(0.2-3.8\%)$ and nucleotide diversity within populations was 0.015 for Yellow Sea, 0.013 for Jejudo, and 0.D15 for South Sea, respectively. The female gene flow was substantial or high (Nm=25.5-36.4), and the genetic distances between regions were not statistically significant $(P>0.01)$. These results indicated that the Japanese anchovy populations occurring in Korean waters were consisted of individuals randomly dispersed over geographic areas.

• Elastomers and Composites
• /
• v.49 no.1
• /
• pp.24-30
• /
• 2014

3-Amino-1,2,4-triazole (ATA) (2.5 and 5.0 phr) was incorporated into a immiscible maleated ethylene propylene diene rubber(mEPDM)/maleated high density polyethylene(mHDPE) (50 wt%/50 wt%) blend by melt mixing. Effects of the ATA on structure, mechanical and rheological properties of the blend was investigated. FT-IR and DMA results revealed that supramolecular hydrogen bonding interactions between the polymer chains occur by reaction of ATA with maleic anhydride grafted onto the component polymers in the blend, which induces the physical crosslinks in the blend. FE-SEM analysis showed that mEPDM forms a dispersed phase in continuous mHDPE matrix, and the blend with the ATA has finer phase morphology as compared to the blend without the ATA. By the addition of ATA in the blend, there were significant increases in tensile strength, modulus and elongation-at-break as well as elastic recoverability. Melt rheology studies revealed that ATA induced substantial increase in storage modulus and complex viscosity of the blend at the melt state.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.8
• /
• pp.1088-1096
• /
• 2006

The purpose of this study was to identify the service encounter blueprint by types of restaurants in order to manage moment of truth when customers who visit a restaurant encounter services. The service encounter blueprint gives an overall picture of the service provision to visualize an entire service process and its integrated structure. The blueprint is used for service process analysis technique. The random samples of 15 customers were observed by types of restaurants and the records were collected for three-days' observation. Interviews were performed by 3 managers, 3 service encounter employees, 3 cashiers, 3 cooks and 10 customers by types of restaurants. After drawing the first service blueprint, it was revised by the interview with the 3 managers and 6 service encounter employees. In this paper, restaurant service processes are reviewed and analyzed. By use of service blueprint, the processes are analyzed to find a fail point, customer wait, employee decision. As a result of making a blueprint of service encounter by types of restaurant, blueprints of fine-dining restaurants and family restaurants were similar, while fast-food restaurants showed a little difference. In particular, difference was indicated in a point where interaction of service encounter occurred. Difference was indicated depending on types of restaurants. Therefore, the efforts to improve this problem were needed. The blueprint is a map or flowchart (called a process chart in manufacturing) of all transactions constituting the service delivery process. The results showed that service encounter blueprint can be used to improve the service process in the restaurant's encounter.

• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.3
• /
• pp.1-6
• /
• 2008

Purpose: Plastic optical monomer materials having ultra high refractive index have an income of the whole quantity from advanced nations to domestic companies which are related to plastic optical lens. It is necessary to develop novel plastic optical lens materials in order to overcome a FTA provision and revitalize a stagnating optical lens industry in the interior optical lens industries. The new plastic optical lens materials against the substitution effect of income should be gradually demanded. This work will be synthesized novel super high refractive monomer resin materials of urethane lens series and studied the properties of optical lens using it. Methods: ETS-4 (2-(2-mercaptoethylthio)-3-{2-[3-mercapto-2-(2-mercaptoethylthio)propyl thio]ethylthio}propane -1-thiol), which is optical lens monomer resin having super high refractive index, was synthesized and identified its structure and property by elemental analysis, EI-MS, TGA, FT-IR spectroscopy, $^1H$ and $^{13}C$ NMR spectroscopies. After mixing evenly from mixed monomer resin and diisocyanate series, it was casting in glass mold. After thermal curing, the obtained optical lenses were measured and compared with the refractive index and Abbe number for studies of their optical properties. Results: We have synthesized the novel ultra high refractive index monomer resin, ETS-4, and have identified its structure and property by elemental analysis, EI-MS, TGA, FT-IR spectroscopy, $^1H$ and $^{13}C$ NMR spectroscopies. The existence of three isomers for EST-4 was identified by $^{13}C$ NMR spectroscopy. The refractive index ($N_d$ at $25^{\circ}C$) of monomer resin in liquid state obtained from the Abbe refractometer was 1.647. The refractive indexes of raw plastic optical lenses prepared from the mixed ETS-4 monomer and diisocyanate series were in the range of 1.656~1.680. Conclusions: Novel super high refractive index plastic optical lens monomer was synthesized and analysed, the optical lenses prepared using it were colorless transparency and excellent properties. It is of utility for the industrialization.

• Journal of Periodontal and Implant Science
• /
• v.36 no.2
• /
• pp.531-554
• /
• 2006

Oral implants must fulfill certain criteria arising from special demands of function, which include biocompatibility, adequate mechanical strength, optimum soft and hard tissue integration, and transmission of functional forces to bone within physiological limits. And one of the critical elements influencing the long-term uncompromise functioning of oral implants is load distribution at the implant- bone interface, Factors that affect the load transfer at the bone-implant interface include the type of loading, material properties of the implant and prosthesis, implant geometry, surface structure, quality and quantity of the surrounding bone, and nature of the bone-implant interface. To understand the biomechanical behavior of dental implants, validation of stress and strain measurements is required. The finite element analysis (FEA) has been applied to the dental implant field to predict stress distribution patterns in the implant-bone interface by comparison of various implant designs. This method offers the advantage of solving complex structural problems by dividing them into smaller and simpler interrelated sections by using mathematical techniques. The purpose of this study was to evaluate the stresses induced around the implants in bone using FEA, A 3D FEA computer software (SOLIDWORKS 2004, DASSO SYSTEM, France) was used for the analysis of clinical simulations. Two types (external and internal) of implants of 4.1 mm diameter, 12.0 mm length were buried in 4 types of bone modeled. Vertical and oblique forces of lOON were applied on the center of the abutment, and the values of von Mises equivalent stress at the implant-bone interface were computed. The results showed that von Mises stresses at the marginal. bone were higher under oblique load than under vertical load, and the stresses were higher at the lingual marginal bone than at the buccal marginal bone under oblique load. Under vertical and oblique load, the stress in type I, II, III bone was found to be the highest at the marginal bone and the lowest at the bone around apical portions of implant. Higher stresses occurred at the top of the crestal region and lower stresses occurred near the tip of the implant with greater thickness of the cortical shell while high stresses surrounded the fixture apex for type N. The stresses in the crestal region were higher in Model 2 than in Model 1, the stresses near the tip of the implant were higher in Model 1 than Model 2, and Model 2 showed more effective stress distribution than Model.

• Applied Biological Chemistry
• /
• v.41 no.1
• /
• pp.110-117
• /
• 1998

Seven kinds of polyphenol compounds having ACE activities were isolated and purified by Sephadex LH-20, MCI-gel CHP-20, ${\um}-Bondapak\;C_{18}$ and Fuji-gel ODS $G_3$ sucessively from cacao bean(Ghana). The chemical structures of each compound were determined and identified using analyzers such as $^1H-NMR$, $^{13}C-NMR$, IR, MS, polarimeter and Elemental Analysis. Inhibition effects of isolated polyphenols on angiotensin converting enzyme (concerned with hypertension) were also observed. The results obtained were as follows,; The compounds isolated and identified were confirmed and determined as compound 1 [(+)-catechin], compound 2 [(-)-epicatechin], compound 3 [procyanidin B-1 : (-)-epicatechin-$(4{\beta}{\rightarrow}8)$-(+)catechin], compound 4 [procyanidin B-2 : (-)-epicatechin-$(4{\beta}{\rightarrow}8)$-(-)-epicatechin], compound 5 [procyanidin B-7 : (-)-epicatechin-$(4{\beta}{\rightarrow}6)$-(+)-catechin], campound 6 (procyanidin B-2,3,3'-O -digallate), compound 7 [cinnamtannin A-2 : (-)-epicatechin-$(4{\beta}{\rightarrow}8)$-(-)-epicatechin-$(4{\beta}{\rightarrow}8)$-(-)-epicatechin-$(4{\beta}{\rightarrow}8)$-(-)-epicatechin]. In the inhibition effect on ACE, procyanidin B-2,3,3'-O-digallate (compound 6) showed a higher value of 94.6% for ACE in $100\;{\um}M$ than other compounds such as (+)-catechin (compound 1), (-)-epicatechin (compound 2), procyanidin B-1 (compound 3), procyanidin B-2 (compound 4), procyanidin B-7 (compound 5) and cinnamtannin A-2 (compound 7) showing 67.9%, 61.9%, 88.6%, 82.5%, 72.2% and 82.3% for ACE, respectively. Inhibition of $4{\beta}{\rightarrow}8$ in coupling bond on the ACE enzyme was more effective than that of $4{\beta}{\rightarrow}6$. Procyanidin containing gallate inhibited more effectively than those containing not any. It was also observed that a lot of hydroxy group in the compounds increased the inhibitory effect.

• Korean journal of communication and information
• /
• v.33
• /
• pp.115-167
• /
• 2006

The purpose of this study was to investigate coverage patterns of the Korean internet news media on 'US-Iraq War' and its meaning and discourse structure. The internet news media was recently established and become a popular news media to compete with old news media in Korea. The author selected the 'Oh My News' as a representative internet news media for his analysis, and collected its news items from Mar. 20, 2003 to Dec. 17, 2003. on the basis of 4 different phases of the war. He analysed the whole of news items with various semiotic and discourse analytic methods, especially applying for Bell's concepts of time and discourse structure. As a result of this study, first of all, it was found that the 'Oh My News' tended to cover this war so different ways as the old news media did. It did not pay attention to the procedure of war, especially, battlefields, fighting between US and Iraq, damages and casualties. But, instead, it paid attention to many doubts about intention of US government and the President, Bush, dichotomous shift between pro-America and anti-America, rightness of dispatching Korean army into Iraq, etc. Secondly, it functioned as a kind of alternative media to speak up different voices comparing with those of old media. It tended to suggest different perspectives and opinions, while the old media tended to follow American perspectives and opinions. Thirdly, it became as a kind of new media setting agendas for this war in Korean society. It played a very important role for setting agendas for various issues related with this war. In conclusion, the internet news media has recently become a kind of new news media for suggesting alternative or different opinions, setting agendas, initiating discourses, etc., even though it still has may problems of becoming so called orthodox news media.