• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.3
• /
• pp.171-177
• /
• 2005

Phase-shifting method using Fourier transform (PSM/FT) has been applied to measurement of in-plane displacement of a specimen. Thirty-two interference fringe patterns each of which has different phase of ${\pi}/16$ radian have been gathered from a specimen with in-plane displacement. Low-pass filtering by 2-D Fourier transform is used to suppress spatial noise of the fringe patterns. ${\alpha}-directional$ Fourier transform for PSM/FT is performed by use of the low-pass filtered 32 fringe patterns. Two kinds of specimens are used for experiment. One is a rectangular steel plate and the other one is a rectangular steel plate containing a circular hole at the center. In-plane displacement of each specimen is measured by PSM/FT, and calculated by finite element method (ANSYS) for comparison. The results are quite comparable, so that PSM/FT can be applied to measurement of in-plane displacement.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.5
• /
• pp.60-70
• /
• 1995

As a Basic study to implement a wide-band photonic switching sysetm, we proposed a scheme of free-space-division-multiplexed photonic switching based on a holographic interconnectio method and carried out simple experiments on it. First, we recorded holgraphic interconnection element array for nonblocking optical interconnections. Just a single stage of the array realizes full optical interconnections between NN${\times}$NN input prots and NN${\times}$NN output ports in 3-D space. Next, in reading of the array for optical internnections, we showed that the zeroth-order diffacted beam could be eliminated in the output port by introducing a right angle prism. The elimination of the zeroth-order diffracted beam reduces optical noise in the output ports and provides conveniences of interconnection control in our scheme. Finally, from the experiments on ON-OFF switching of the optical interconnection paths one by one using a spatial (display of the liquid crystal telecision), we showed the feasibility of photonic wsitching based on the holographic interconnection method. We also estimated approximately the maximum interconnectio scale that can be realized without difficulty with current optical devices.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.285-287
• /
• 2010

It is recently enlarged to necessity of 3D spatial information model in urban areas. and in order to that, It is increased to use the terrestrial LiDAR. The Point clouds which are received by terrestrial LiDAR take a relateive coordinate. For transform into absolute coordinate, it carry out GPS surveying. However, it is difficult to geo-referencing of point clouds using the GPS due to high buildings and facilities in urban area. This study suggests a methodology, that is geo-referencing of point clouds which is received from terresstrial LiDAR in urban area and then verified accuracy of geo-referencing of point clouds. In order to geo-Referencing of point clouds which are received in Engineering building of Yonsei Univ., it was be setout through GPS surveying, and then obtained absolute coordinate of real building. Using this coordinate, It was operated geo-referencing of point clouds, verified accuracy between check point and geo-referenced point clouds. As a result, RMSE of check point shows that GPS surveying is 6.9~8.0cm.

• Fisheries and Aquatic Sciences
• /
• v.11 no.2
• /
• pp.113-123
• /
• 2008

We modeled fish school movements as a capture process in relation to the purse seine method using the three steps of the stimulus-response process (i.e., input stimuli, central decision-making and output reaction). Input stimuli of the model were categorized as either physical stimuli such as visual stimulus, sound stimulus, water flow, and weather or as biological stimuli such as species and size, swimming performance, sensual sensitivity, and presence of prey or predators. The output process determining the spatial orientation of the fish school for 3-D movements was based on swimming speed and angular change in the fish response, and these movements were animated as the relative geometry between the fish school and the purse seine. Simulations were carried out for skipjack tuna (Katsuwonus pelamis) schools reacting to a pelagic purse seine in the southwest Pacific Ocean. Simulation results showed that escape ratios varied from 20 to 70% by the relevant ranges in the stimulus-response thresholds, swimming speeds, and angular changes of fish schools were similar to those observed in the field. Therefore, with knowledge of relevant parameters, this model can be used to predict capture and escape probabilities of purse seine operations for different fish species or conditions.

• Journal of Broadcast Engineering
• /
• v.16 no.3
• /
• pp.510-519
• /
• 2011

Intra mode decision is a useful coding tool in Distributed Video Coding (DVC) for improving DVC coding efficiency for video sequences having fast motion. A major limitation associated with the existing intra mode decision methods, however, is that its efficiency highly depends on user-specified thresholds or modeling parameters. This paper proposes an entropy-based method to address this problem. The probabilities of intra and Wyner?Ziv (WZ) modes are determined firstly by examining correlation of pixels in spatial and temporal directions. Based on these probabilities, entropy of the intra and the WZ modes are computed. A comparison based on the entropy values decides a coding mode between intra coding and WZ coding without relying on any user-specified thresholds or modeling parameters. Experimental results show its superior rate-distortion performance of improvements of PSNR up to 2 dB against a conventional Wyner?Ziv coding without intra mode decision. Furthermore, since the proposed method does not require any thresholds or modeling parameters from users, it is very attractive for real life applications.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.2
• /
• pp.1-11
• /
• 2023

This study intended to develop a technique for quantitatively and 3-dimensionally predicting the potential failure zone and impulse that may occur when trees are fall down. The main outcomes of this study are as follows. First, this study established the potential failure zone and impulse calculation formula in order to quantitatively calculate the risks generated when trees are fallen down. When estimating the potential failure zone, the calculation was performed by magnifying the height of trees by 1.5 times, reflecting the likelihood of trees falling down and slipping. With regard to the slope of a tree, the range of 360° centered on the root collar was set in the case of trees that grow upright and the range of 180° from the inclined direction was set in the case of trees that grow inclined. The angular momentum was calculated by reflecting the rotational motion from the root collar when the trees fell down, and the impulse was calculated by converting it into the linear momentum. Second, the program to calculate a potential failure zone and impulse was developed using Rhino3D and Grasshopper. This study created the 3-dimensional models of the shapes for topography, buildings, and trees using the Rhino3D, thereby connecting them to Grasshopper to construct the spatial information. The algorithm was programmed using the calculation formula in the stage of risk calculation. This calculation considered the information on the trees' growth such as the height, inclination, and weight of trees and the surrounding environment including adjacent trees, damage targets, and analysis ranges. In the stage of risk inquiry, the calculation results were visualized into a three-dimensional model by summarizing them. For instance, the risk degrees were classified into various colors to efficiently determine the dangerous trees and dangerous areas.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.4
• /
• pp.117-125
• /
• 2014

Korea's first X-band SAR satellite KOMPSAT-5 has been launched in 2013, so the research related to the X-band SAR satellite image is required to increase the utilization of KOMPSAT-5. In this study, we generated a DEM(Digital Elevation Model) using X-band SAR satellite images based on three methods which are InSAR, radargrammetry and RPC(Rational Polynomial Coefficients), and evaluated the performance of each methods. The four stripmap mode TerraSAR-X images taken in Daejeon were used to generate DEM, and accuracy was evaluated using DEM by IKONOS RPC. As results, DEM produced by the InSAR showed the highest accuracy. Also, we knew that RPC could be effective method if you want to create a large area DEM which contains the various elevation.

• The Journal of the Korea Contents Association
• /
• v.18 no.2
• /
• pp.231-239
• /
• 2018

In this paper, we propose a vanishing point detection method using multiple initial vanishing points. Vanishing points are important geometric information that is used for reconstructing 3D structures. Three vanishing points are detected for indoor scenes. In the previous work, it could be inaccurate to detect only one initial vanishing point, because initial vanishing point getting most highest sum of voting could be deferent from the best initial vanishing point. Therefore the method which sets multiple initial vanishing point and detects a best vanishing point from them gives us preparation for the prior case. Also in this paper, we propose a adjusting vanishing point method by postprocessing of detected vanishing points. We could detect more accurate vanishing point by using postprocessing. Experimental results show that the accuracy of the vanishing point detection is about 1~2% higher than that of the existing method through the proposed method and the performance is improved accordingly.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.3
• /
• pp.48-56
• /
• 2004

This research focuses on the development of a fast datum transformation model to be used in GIS that utilizes real-time data transformation. Instance, when a GIS data constructed according to a datum is conformed to another datum, instead of transforming the axes of the original data, the data is transformed right before the results are reflected on the monitor. In this research, the prospects of calculating transformation parameters for every grid cells on the area based on two-dimensional conformal transformation model in order to decrease real-time datum transformation time while maintaining a high accuracy has been investigated. Research results showed that for a fixed area, the accuracies of the two-dimensional conformal transformation and the three-dimensional datum transformation, which requires more computing time, were almost equal and fast transformation speed, high accuracy real-time datum transformation is made feasible by implementing the grid-divided two-dimensional conformal transformation model.

• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.2 s.40
• /
• pp.77-85
• /
• 2007

According to the survey data during the Japanese Occupation Period, the length of South Korea's coastline is about 11,542 km, including the coastlines of land and islands. It will be very expensive and time-consuming to revise/renew accurately this coastline data through site survey, it will cost great money and time. Also, various development projects such as reclamation works on public waters, constructions of ports/harbors, etc. are frequently changing the coastal areas and coastlines, causing many renewal projects on coastal maps. For such reason, appropriate alternatives for site survey are necessary. This paper demonstrate the utilization of RTK-GPS survey data, qualitative analysis and 3D topographic analysis for extracting the change in five coastal areas (Songjeong, Haeundae, Kwanganri, Songdo and Dadaepo). The local experimental areas subjected for this research were limited to five coastal areas near Busan.