• Journal of the Mineralogical Society of Korea
• /
• v.6 no.2
• /
• pp.116-121
• /
• 1993

A single crystla of zeolite $Na_{78}Rb_{28}-X$ (approximate composition) was prepared by exposing $Na_{92}-X$ at $350^{\circ}C$ to 0.1 Torr of rubidium vapor, and its structure was determined by single-crystal x-ray diffraction methods in the cubic space group, Fd3, ${\alpha}=25.045(4){\AA}$. The structure was refined to the final error indices $R_1=0.082$ and $R_2=0.084$ with 353 for which I>$3{\sigma}(I)$. Only about 28 of the 92 $Na^+$ ions per unit cell were reduced and only about 14 of the 28 $Na^0$ atoms produced were retained within the zeolite. A $Na_5{^{4+}}$ cluster is present within each sodalite cavity. It is a centered tetrahedron (like $CH_4$) with bond $length=2.80(2){\AA}$ and angle tetrahedral by symmetry, and shows the full symmetry of its site. $T_d$, at the center of the sodalite cavity. Each of the four terminal atoms of the $Na_5{^{4+}}$ cluster bond to three framework oxygens at $2.36(2){\AA}$. At the centers of some double 6-rings are sodium atoms which bridge linearly between $Na_5{^{4+}}$ clusters to form agglomerations such as short zig-zag chains $Na_5{^{4+}}$ clusters. Delocalized electrons, located primarily on the sodiums at centers of the sodalite and (likely) double-six-ring cavities, contribute to the stability of the clusters.

• Korean Journal of Food Science and Technology
• /
• v.17 no.1
• /
• pp.37-40
• /
• 1985

The reactor performance of a coimmobilized glucose oxidase and catalase enzyme system was investigated. In the determination of efficiencies of glucose oxidase and catalase of dual, mixed and soluble systems, the dual type immobilized one was superior to either the soluble or to the mixed system. In the continuous plugflow bed reactor system of glucose oxidase and catalase, $k-d$, deactivation rare constant of glucose oxidase only and catalase/glucose oxidase = 10 were $1.12\;{\times}\;10^{-2}\;and\;2.17\;{\times}10^{-3}\;hr^{-1}$, respectively. In the effect of ${\tau}$, space time, the point of $O_2$ limitation is $5.5\;g{\cdot}hr/l$ in both catalase/glucose oxidase = 1 and 10. In the effect of $O_2$ concentration to reduce the $O_2$ diffusion limitation, it appeared that ${\tau}\;=\;8.3g{\cdot}r/l$ is the maximum point of $O_2$ concentration in both catalase/glucose oxidase = 1 and 10.

• The Korean Journal of Petroleum Geology
• /
• v.11 no.1 s.12
• /
• pp.9-17
• /
• 2005

In the main target area of the block II, Targe-scale faults occur below the unconformity developed around 1 km in depth. The contrast of seismic velocity around the unconformity is generally so large that the strong multiples and the radical velocity variation would deteriorate the quality of migrated section due to serious distortion. More than 15 kinds of data processing techniques have been applied to improve the image resolution for the structures farmed from this active crustal activity. The bad and noisy traces were edited on the common shot gathers in the first step to get rid of acquisition problems which could take place from unfavorable conditions such as climatic change during data acquisition. Correction of amplitude attenuation caused from spherical divergence and inelastic attenuation has been also applied. Mild F/K filter was used to attenuate coherent noise such as guided waves and side scatters. Predictive deconvolution has been applied before stacking to remove peg-leg multiples and water reverberations. The velocity analysis process was conducted at every 2 km interval to analyze migration velocity, and it was iterated to get the high fidelity image. The strum noise caused from streamer was completely removed by applying predictive deconvolution in time space and ${\tau}-P$ domain. Residual multiples caused from thin layer or water bottom were eliminated through parabolic radon transform demultiple process. The migration using curved ray Kirchhoff-style algorithm has been applied to stack data. The velocity obtained after several iteration approach for MVA (migration velocity analysis) was used instead or DMO for the migration velocity. Using various testing methods, optimum seismic processing parameter can be obtained for structural and stratigraphic interpretation in the Block II, Yellow Sea Basin.

• Tunnel and Underground Space
• /
• v.14 no.5
• /
• pp.327-338
• /
• 2004

The purpose of this research is to establish a concept of the factor of safety of tunnels which is a quantitative estimate of the stability of tunnels. Based on this concept, a numerical technique which calculates the factor of safety of tunnels was developed. To obtain the safety factor of a tunnel, the strength reduction technique in which a series of analyses are repeated with reduced ground strength until the tunnel collapses were employed. With this technique, the failure plane, as well as the factor of safety, can be obtained without prescribing the trial failure plane. Analyses were conducted with FLA $C^{2D}$(ver3.3), a geotechnical analysis program which is based on the finite difference method. From the result, the location of plastic zones, the maximum convergence and the maximum stress generated in the support system were also analyzed. The result shows that factors of safety are higher for the 1st and 2nd rock classes, and lower for the lower rock classes. Furthermore, factor of safety is higher when $K_{0}$ =0.5 compared to at in case of $K_{0}$ =2.0. Through this research, it is found that the factor of safety defined in this research can be used as a good quantitative index representing the stability of tunnels. Also, close examination of the results can help adjustment of the quantity and location of additional supports.s.

• Tunnel and Underground Space
• /
• v.23 no.5
• /
• pp.383-391
• /
• 2013

A number of true triaxial tests on rock samples have been conducted since the late 1960 and their results strongly suggest that the intermediate principal stress has a considerable effect on rock strength. Based on these experimental evidence, various 3-D rock failure criteria accounting for the effect of the intermediate principal stress have been proposed. Most of the 3-D failure criteria, however, are focused on the phenomenological description of the rock strength from the true triaxial tests, so that the associated strength parameters have little physical meaning. In order to confirm the likelihood that the intermediate principal stress dependency of rock strength is related to the presence of weak planes and their distribution to the preferred orientation, true triaxial tests are simulated with the transversely isotropic rock model. The conventional Mohr-Coulomb criterion is extended to its anisotropic version by incorporating the concept of microstructure tensor. With the anisotropic Mohr-Coulomb criterion, the critical plane approach is applied to calculate the strength of the transversely isotropic rock model and the orientation of the fracture plane. This investigation hints that the spatial distribution of microstructural planes with respect to the principal stress triad is closely related to the intermediate principal stress dependency of rock strength.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.2
• /
• pp.353-359
• /
• 2015

This study introduces a resource recycling system in urban apartment complex using four different technologies. The four technologies, called 4G, include a production technology for reclaimed water (Green water), a biogas production technology from organic waste (Green biogas), a reuse technology of rainwater (Green rainwater), and urban agropark (Green pyramid). Green water is the technology for producing the reclaimed water from wastewater, rainwater and underground water, and the average concentrations of BOD, SS, T-N and coliform of reclaimed water were 7.8mg/L, ND (not detected), 4.9mg/L and ND, respectively. Green biogas is the technology for producing biogas and effluent after treating organic wastes (e.g. food waste and night soil) discharged from households, and the average production rates of hydrogen and methane were $0.33m^3/m^3/d$ and $0.24m^3/m^3/d$, respectively. Green pyramid, agricultural farm operated by biogas and reclaimed water, provides a healthy and recreational space for residents, and plant growth rates using treated water and reclaimed water showed height of 1.32cm and weight of 112.8g. Therefore, 4G technologies can improve the recycling rate and treatment efficiencies of waste and wastewater in an apartment complex.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.06a
• /
• pp.109-111
• /
• 2006

본 논문은 애니메이터로 하여금 얼굴 표정들의 공간으로부터 일련의 표정을 선택하게 함으로써 3차원 아바타의 표정을 실시간적으로 제어할 수 있도록 하기 위한 표정공간의 생성방법에 관하여 기술한다. 본 시스템에서는 약 2400여개의 얼굴 표정 프레임을 이용하여 표정공간을 구성하였다. 본 기법에서는 한 표정을 표시하는 상태표현으로 얼굴특징 점들 간의 상호거리를 표시하는 거리행렬을 사용한다. 이 거리행렬의 집합을 표정공간으로 한다. 그러나 이 표정공간은 한 표정이 다른 표정까지 이동할 때 두 표정간의 직선경로를 통해 이동할 수 있는 그런 공간이 아니다. 본 기법에서는 한 표정에서 다른 표정까지 거쳐 갈 수 있는 경로를 캡쳐된 표정 데이터로부터 근사적으로 유추한다. 우선, 각 표정상태를 표현하는 거리행렬간의 거리가 일정 값 이하인 경우 두 표정을 인접해 있다고 간주한다. 임의의 두 표정 상태가 일련의 인접표정들의 집합으로 연결되어 있으면 두 표정간에 경로가 존재한다고 간주한다. 한 표정에서 다른 표정으로 변화할 때 두 표정간의 최단경로를 통해 이동한다고 가정한다. 두 표정간의 최단거리를 구하기 위해 다이내믹 프로그래밍 기법을 이용한다. 이 거리행렬의 집합인 표정공간은 다차원 공간이다. 3차원 아바타의 얼굴 표정 제어는 애니메이터들이 표정공간을 항해할 때 실시간적으로 수행된다. 이를 도와주기 위해 표정공간을 차원 스케일링 기법을 이용하여 2차원 공간으로 가시화하였고, 애니메이터들로 하여금 본 시스템을 사용하여 실시간 표정 제어를 수행하게 했는데, 본 논문은 그 결과를 평가한다.참여하는 빈들 간의 관계를 분석하여 워크플로우에 대한 성능 측정이 가능하도록 한다. 또한 제안된 메트릭을 통하여 EJB 어플리케이션의 성능 향상을 도모할 수 있도록 한다.로 표면 위로 자라났고, 부종은 창상 밑 조직까지 감소하였으며, 육아조직은 교원질 섬유로 대체되었다. 창상 유발 21일 후, 다른 창상에 비해, HG 처치창은 유의적으로 창상 표면이 거의 재생성 상피로 덮였으며, 육아조직은 창상 유발 14일 후와 비교해서 유의적으로 교원질 섬유로 대체되었다. 위의 모든 결과에서 보듯이, 개에서 전층피부 창상의 처치 시 HG의 사용은 HC와 생리 식염수에 비해 창상치유 복구기의 치유 속도를 촉진하는 것으로 사료된다.시범학교의 자녀를 들 부모들은 환경관련문제에 대한 의식 및 환경관련 제품에 대한 구매행동의 변화가 두드러지게 나타났다.EX>$d^{2+}$ + SA처리구는 두 화합물의 이중 효과에 의해 전반적인 생리 활성을 억제하여, 결국에는 식물의 고사를 유도하는 것으로 사료된다.목에 대한 보안'이 가장 중요한 것으로 나타났다. 본 연구에서는 솔루션 선정요인에 관한 중요도를 e-마켓플레이스의 유형과 산업 별로 평가해보았는데, 여기에서 밝혀진 중요도를 통해 e 마켓플레이스를 구축하고 자 하는 기업은 솔루션을 자체 개발하거나 구입할 때 올바른 의사결정을 할 수 있다. 그리고 솔루션을 제공하려는 기업측면에서는 e-마켓플레이스를 구축하고자 하는 기업에게 유형과 산업별로 적절한 솔루션을 제공할 수 있다.순환이 뇌대사 및 수술 후 신경학적 결과에 보다 유익한 효과를 제공해 줄 수 있음

• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.3
• /
• pp.54-67
• /
• 2013

This study deals with the characteristics of view landscape in modern Daegu city which were analysed employing geographic information system(GIS). The view landscape analysis was performed by using GIS that enables to overlap land use map with the map of range of visibility, and the 3-D simulation. The results are as follows; First of all, the ratio of forest is enormously high in the range of visibility. The distribution of landscape components allows the dwellers to obtain a clear view towards forests from anywhere. The landscape components include west eroded lowlands, east open rolling lands, east eroded lowlands, and high mountain areas: Apsan(Mt.) in the south; Waryoungsan(Mt.) in the west; and Hamjisan(Mt.) and Hakbong(Mt.) in the north. On the tops of those, people are able to secure a clear vision from the viewpoint towards the surrounding mountains because of the rural areas continuing from the viewpoint to the mountains. A continuous view landscape has been formed by these natural environmental factors. Finally, there are multiple view targets with relatively high altitude that are covered with forests in the space between the urban area and the outer mountains that are higher than the view targets, which provides a scenery of mountains overlapped by higher mountains.

• Journal of the Korean Chemical Society
• /
• v.43 no.5
• /
• pp.547-551
• /
• 1999

The phase change upon Bi substitutions in $Ca_{1.5-1.5x}Bi_xVO_4$ has been systematically studied. The x value corresponding to the maximum Bi substitutions reades to 0.14 and in this range($x{\leq}0.14$), the single phasic $Ca_3(VO_4)_2$ can be identified. However, a new phase of $BiV_{1.025}O_{4+x}$ is apparently formed along with the $Ca_3(VO_4)_2$ phase, when the x value exceeds beyond 0.18 ($x{\geq}0.18$). As a result of Bi substitution in the range of x$\leq$0.14, the interplanar space($d_300$) becomes larger as the Bi content increases. Since the composition of single phasic $Ca_{1.29}Bi_{0.14}VO_4$ (x=O.14) is, however, incongruent melting one, no definite melting point could be observed. But we found that its solidus temperature was 1182$^{\circ}C$ by DTA analysis.

• Applied Biological Chemistry
• /
• v.47 no.3
• /
• pp.300-306
• /
• 2004

Eight cation or anion-responsive polymer membranes were prepared by a casting procedure employing polyvinyl chloride, Bis (2-ethylhexyl)sebacate and each electroactive material in the ratio of 66 : 33 : 1. The resulting membranes were separately installed onto the sensitive area of the ionic electrodes to produce an 8-channel taste sensor array. The taste sensors of the array were connected to a high-input impedance amplifier and the amplified sensor signals were interfaced to a PC via an A/D converter. The taste evaluation system was applied to a discriminant analysis on six groups of marketed beverages like sikhye, sujunggwa, tangerine juice, ume juice, ionic drink and green tea. When the signal data from the sensor array were analyzed by principal component analysis after normalization, the 1st, 2nd and 3rd principal component explained most of the total data variance. The six groups of the analyzed beverages were discriminated well in the three dimensional principal component space. The half of the five groups of the analyzed beverages was also discriminated in the two dimensional principal component plane.