• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1314-1317
• /
• 2006

The problem of the conflict between eye convergence and accommodation can be induced at Stereoscopic or multi-view 3D display system using binocular disparity. A multi-focus 3D display system was developed, which can solve the problem. LEDs are used instead of galvano scanner and laser to avoid mechanical moving part at the 3D display system.

• 한국측량학회지
• /
• 제38권1호
• /
• pp.35-41
• /
• 2020

3D 레이저 스캐너는 대상물에 대한 많은 양의 데이터를 빠른 시간 내에 취득할 수 있는 효과적인 방법으로 최근 측량, 변위측정, 대상물의 3차원 데이터 생성, 실내공간정보 구축, BIM (Building Information Model) 등 다양한 분야에 활용되고 있다. 3D 레이저 스캐너를 통해 취득되는 점군데이터의 활용을 위해서는 정합과정을 거쳐 많은 측점에서 취득한 데이터를 통일된 좌표체계를 가진 하나의 데이터로 만드는 과정이 필요하다. 따라서 정합 방법에 따른 점군데이터의 정확도에 대한 분석적 연구가 필요하다 이에 본 연구에서는 3D 레이저 스캐너를 통해 취득되는 점군데이터의 정합방법에 따른 정확도를 분석하고자 하였다. 3D 레이저 스캐너를 통해 연구대상지의 점군데이터를 취득하고, 자료처리를 통해 ICP (Iterative Closest Point) 와 형상정합 방법에 의해 점군데이터를 정합하였으며, 토털스테이션 측량성과와 비교하여 정확도를 분석하였다. 정확도 평가 결과 ICP와 형상정합 방법은 각각 토털스테이션 성과와 0.002~0.005m, 0.002~0.009m의 차이를 나타내었다. 각각의 정합 방법은 실험결과 모두 0.01m 미만의 편차를 나타내어 1:1,000 수치지형도의 허용정확도를 만족하였으며, ICP 및 형상정합을 이용한 점군데이터의 정합이 공간정보 구축에 충분히 활용 가능함을 제시하였다. 향후 형상정합 방법에 의한 점군데이터의 정합은 3D 레이저 스캐너를 활용한 공간정보 구축 과정에서 타겟의 설치를 줄임으로써 생산성 향상에 기여할 것이다.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.311-313
• /
• 2002

We are under development of a 3D PET scanner with depth of interaction (DOI) capable of high sensitivity and high resolution. In this scanner, a maximum data transfer rate of coincidence pair's event information is 10 Mcps and one event is a 64-bit data format. This maximum data transfer rate corresponds by 10 times a conventional PET scanner. A data acquisition system, which fulfills the specification of this scanner, is considered for parallel collection with banks including several coincidence units. Data transfer rate is improved by optimizing parameters of a message size, and so on.

• 대한임베디드공학회논문지
• /
• 제9권4호
• /
• pp.219-227
• /
• 2014

Natural disasters such as a ground collapse and a landslide have broken out due to the climate change of the Korea and the reckless expansion of cities and roads. The climate changes and the reckless urbanization have made the ground weak. Thus, it is important to keep a close eye on the highly weakened landslide and to prevent its natural disasters. In order to prevent these disasters, this paper presents a system of recognizing the road slide condition by measuring the displacements using laser scanner instrument. The previous system of monitoring the road slide has some problems as inaccurate recognition due to using only images from a camera, or expensive system such as artificial satellites and aircraft systems. To solve this problem, our proposed system uses the 3D range data from the laser scanner for measuring the accurate displacement of the road slide and optical flows from the Lucas-Kanade algorithm for recognizing the road slide in the image.

• 한국정밀공학회지
• /
• 제25권7호
• /
• pp.7-12
• /
• 2008

• 한국농촌건축학회논문집
• /
• 제21권4호
• /
• pp.25-36
• /
• 2019

The purpose of the study is to analyze how to document survey and repair data on wooden architecture culture assets. Documentation was analyzed in comparison to digital developments from the past to the present. Although the accuracy of survey equipment has been improved by digital development, survey drawing has not changed. For example, a 3D Scanner, survey equipment, was introduced but is being used for conversion into 2D data. Data provided by the drawing included in the survey and repair reports were not accumulated. As it stands, it is inaccessible and disorganized. Data generated from the survey, repair, and maintenance has to be consistent. A BIM system was proposed to integrate information on wooden architecture cultural assets.

• 대한치과교정학회지
• /
• 제45권3호
• /
• pp.105-112
• /
• 2015

Objective: A recently developed facial scanning method uses three-dimensional (3D) surface imaging with a light-emitting diode. Such scanning enables surface data to be captured in high-resolution color and at relatively fast speeds. The purpose of this study was to evaluate the accuracy and precision of 3D images obtained using the Morpheus 3D$^{(R)}$ scanner (Morpheus Co., Seoul, Korea). Methods: The sample comprised 30 subjects aged 24.34 years (mean $29.0{\pm}2.5$ years). To test the correlation between direct and 3D image measurements, 21 landmarks were labeled on the face of each subject. Sixteen direct measurements were obtained twice using digital calipers; the same measurements were then made on two sets of 3D facial images. The mean values of measurements obtained from both methods were compared. To investigate the precision, a comparison was made between two sets of measurements taken with each method. Results: When comparing the variables from both methods, five of the 16 possible anthropometric variables were found to be significantly different. However, in 12 of the 16 cases, the mean difference was under 1 mm. The average value of the differences for all variables was 0.75 mm. Precision was high in both methods, with error magnitudes under 0.5 mm. Conclusions: 3D scanning images have high levels of precision and fairly good congruence with traditional anthropometry methods, with mean differences of less than 1 mm. 3D surface imaging using the Morpheus 3D$^{(R)}$ scanner is therefore a clinically acceptable method of recording facial integumental data.

• 대한기계학회논문집B
• /
• 제37권9호
• /
• pp.823-828
• /
• 2013

실리콘 태양전지의 두께를 줄일 경우 여러 문제점이 발생하게 되는데 그 중에서 태양전지의 휨 현상은 제품 수율의 직접적인 원인이 되어 제품 상용화에 가장 큰 걸림돌이 되고 있다. 본 연구에서는 태양전지의 실리콘 웨이퍼 두께를 가변하였을 때의 휨 정도에 대해 정밀하게 측정하고자 하였다. 측정결과의 신뢰성을 높이고 비 대칭성 형상에 대해 자세하고 정밀하게 분석하기 위해 3D 이미지 스캐너를 사용하였다. 그 결과 실리콘 웨이퍼의 두께가 감소할수록 휨 정도는 급격하게 증가하고 곡률 또한 증가하는 것을 확인할 수 있었다. 실리콘 웨이퍼의 두께가 감소할 수록 휨 정도의 편차가 증가하여 형상의 비 대칭성이 증가하는 것 또한 확인되었다. 또한 Ag 전극의 부착이 휨 현상을 어느 정도 감소시키는 것을 알 수 있었다.

• Computers and Concrete
• /
• 제33권5호
• /
• pp.595-603
• /
• 2024

In the construction industry, there has been a surge in the implementation of high-tech equipment in recent years. Various technologies are being considered as potential solutions for future construction projects. Building information modeling (BIM), which utilizes advanced equipment, is a promising solution among these technologies. The need for safety inspection has also increased with the aging structures. Nevertheless, traditional safety inspection technology falls short of meeting this demand as it heavily relies on the subjective opinions of workers. This inadequacy highlights the need for advancements in existing maintenance technology. Research on building safety inspection using 3D laser scanners has notably increased. Laser scanners that use light detection and ranging (LiDAR) can quickly and accurately acquire producing information, which can be realized through reverse engineering by modeling point cloud data. This study introduces an innovative evaluation system for building safety using a 3D laser scanner. The system was used to assess the safety of an existing three-story building by implementing a reverse engineering technique. The 3D digital data are obtained from the scanner to detect defects and deflections in and outside the building and to create an as-built BIM. Subsequently, the as-built structural model of the building was generated using the reverse engineering approach and used for structural analysis. The acquired information, including deformations and dimensions, is compared with the expected values to evaluate the effectiveness of the proposed technique.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.211.1-211.1
• /
• 2005