• 한국기계가공학회지
• /
• 제15권5호
• /
• pp.86-92
• /
• 2016

In this study, we used a polymer deposition system, based on fused deposition modeling, to fabricate the 3D scaffold and then fabricated micro-pores on a 3D scaffold using a salt leaching method. Materials included polycaprolactone (PCL) and sodium chloride (NaCl). The 3D porous scaffolds were fabricated according to blending ratio such as PCL (70 wt%)/NaCl (30 wt%) and PCL (50 wt%)/NaCl (50 wt%). The 3D porous scaffolds were observed by scanning electron microscopy. The results showed that 3D porous scaffolds had a deposition width of $500{\mu}m$, contained a pore size of $500{\mu}m$ and below $100{\mu}m$. To evaluate the 3D porous scaffolds for bone tissue engineering, we carried out the cell proliferation experiment using a CCK-8 and a mechanical strength test using a universal testing machine. In summary, the 3D porous scaffold was found to be suitable for cancellous bone of human in accordance with the result of in-vitro cell proliferation and mechanical strength. Thus, a 3D porous scaffold could be a promising approach for effective bone regeneration.

• Journal of Mechanical Science and Technology
• /
• 제20권10호
• /
• pp.1722-1729
• /
• 2006

Predicting the mechanical properties of the 3-D scaffold using finite element method (FEM) simulation is important to the practical application of tissue engineering. However, the porous structure of the scaffold complicates computer simulations, and calculating scaffold models at the pore level is time-consuming. In some cases, the demands of the procedure are too high for a computer to run the standard code. To address this problem, the representative volume element (RVE) theory was introduced, but studies on RVE modeling applied to the 3-D scaffold model have not been focused. In this paper, we propose an improved FEM-based RVE modeling strategy to better predict the mechanical properties of the scaffold prior to fabrication. To improve the precision of RVE modeling, we evaluated various RVE models of newly designed 3-D scaffolds using FEM simulation. The scaffolds were then constructed using microstereolithography technology, and their mechanical properties were measured for comparison.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1697-1699
• /
• 2008

The purpose of tissue engineering is to repair or replace damaged tissues or organs by a combination of cells, scaffold, suitable biochemical and physio-chemical factors. Among the three components, the biodegradable scaffold plays an important role in cell attachment and migration. In this study, we designed 3D porous scaffold by Rapid Prototyping (RP) system and fabricated layer-by-layer 3D structure using Polycarprolactone (PCL) - one of the most flexible biodegradable polymer. Furthermore, the physical and mechanical properties of the scaffolds were evaluated by changing the pore size and the strand diameter of the scaffold. We changed nozzle diameter (strand diameter) and strand to strand distance (pore size) to find the effect on the mechanical property of the scaffold. And the surface morphology, inner structure and storage modulus of PCL scaffold were analyzed with SEM, Micro-CT and DMA.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.1141-1142
• /
• 2012

• 대한의용생체공학회:의공학회지
• /
• 제35권6호
• /
• pp.192-196
• /
• 2014

Collagen scaffolds were synthesized by cross linking into a solution mixture of 1-ethyl-3-[3-dimethylaminopropyl] carbodiimide hydrochlorid(EDC) in ethanol, followed by pressing, cleaning and lyophilization process after the type I atelo-collagen solutions in D.I water(pH3). The experimental conditions are collagen concentration of 1.0 wt%, 3.0 wt%, 5.0 wt% and differential concentration of cross-linker. Then, parametric studies were performed by varying the parameters to investigate the morphology, the porosity, the swelling ratio and the thickness and genotoxicity of the scaffolds. The scaffolds thickness pattern was regular to concentration of the degree of cross-linker and collagen. It was observed that the swelling ratio, the degree of crosslink, and the pore size(thickness of scaffold) can be controlled by adjusting the collagen, crosslinker. Among the parameters investigated, the smallest thickness can be achieved by collagen, crosslinker concentrate condition. The collagen scaffold is induced no genotoxicity. The lowest swelling ratio, as an indication of the highest degree of crosslink, can be obtained by adding crosslink agent.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.655-656
• /
• 2010

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.597-598
• /
• 2008

• 폴리머
• /
• 제32권2호
• /
• pp.163-168
• /
• 2008

생체 친화적이며 생분해성 고분자 소재인 poly($\varepsilon$-caprolactone)(PCL)을 rapid prototyping(RP) 공정인 바이오플로팅 시스템을 통해 세포 재생용 지지체(scaffold)를 제작하였다. 제작된 PCL 지지체는 DMA(dynamic mechanical analyzer)를 통해 동일한 재료로 제작된 기존 염침출법(salt-leaching)에 의한 지지체보다 월등히 향상된 기계적 강도를 갖고 있음을 확인하였고, 이는 기존 전통적인 세포지지체 제작에서 문제점중의 하나인 기계적인 강도적인 측면을 보완하여, 뼈조직 재생에 유용하게 활용될 수 있을 것으로 예상된다. 지지체 내부의 구조는 세포의 증식과 이동 및 영양분의 공급이 지속될 수 있도록 전체적으로 연결된 통로로 구성되어 있고, 다양한 세포의 증식이 가능하도록 지지체의 공극 크기와 strand의 굵기 등을 조절할 수 있으며, 이를 이용하여 대체하고자 하는 생체조직의 특성에 맞도록 기계적 강도를 조정할 수 있음을 확인하였다. 제조된 PCL지지체는 연골세포를 통하여 셀 컬쳐링 되었고, 3차원 세포 지지체로서의 충분한 가능성을 보여주었다.

• 한국정밀공학회지
• /
• 제26권1호
• /
• pp.146-154
• /
• 2009

In recent tissue engineering field, it is being reported that the fabrication of 3D scaffolds having high porous and controlled internal/external architectures can give potential contributions in cell adhesion, proliferation and differentiation. To fabricate these scaffolds, various solid free-form fabrication technologies are being applied. The solid free-form fabrication technology has made it possible to fabricate solid free-form 3D microstructures in layer-by-layer manner. In this research, we developed a multi-head deposition system (MHDS) and used design of experiment (DOE) to fabricate 3D scaffold having an optimized internal/external shape, Through the organization of experimental approach using DOE, the fabrication process of scaffold, which is composed of blended poly-caprolactone (PCL), poly-lactic-co-glycolic acid (PLGA) and tricalcium phosphate (TCP), is established to get uniform line width, line height and porosity efficiently Moreover, the feasibility of application to the tissue engineering of MHDS is demonstrated by human bone marrow stromal cells (hBMSCs) proliferation test.

• 한국산학기술학회논문지
• /
• 제17권2호
• /
• pp.58-65
• /
• 2016

본 연구는 조직공학용 지지체로 사용될 막을 개발하기 위한 초도 연구 수행으로, 염화나트륨(NaCl)을 기공형성체로 혼합한 폴리카프로락톤(PCL)용액을 유리 캐스팅판에 분주한 후 필름 어플리케이터를 이용하여 다공성 PCL필름을 성형하였다. 성형된 필름은 건조 후 증류수에 침지시켜 NaCl을 추출하여 최종 멤브레인형 다공성 지지체를 제조하였다. 3차원 다공망을 형성시키기 위하여 NaCl을 기공형성체로 이용하였으며 $4^{\circ}C$, 실온, $40^{\circ}C$의 세 가지 건조조건에 따른 다공망의 형성과 형태를 주사전자현미경(SEM)을 이용하여 관찰 하였으며 기초적인 안전성 확보를 위한 세포독성평가를 시행하였다. 세 가지의 건조조건별 결과에서는 실온 건조조건에서 거대기공과 미세기공이 혼재된 3차원 다공망이 우수하게 형성된 것이 관찰되었으며 세포독성 시험결과 ISO10993-5 규격의 세포독성 판단기준에 따라 grade 2(mildly cytotoxic)로 나타난바 생체용으로 적합하다고 볼 수 있다. 본 연구를 통하여 멤브레인형 다공성 지지체 제조에 건조조건이 3차원 다공망의 형성 및 거대기공과 미세기공이 함께 형성되는 것에도 영향을 미치는 것으로 나타났으며 이 결과는 다공성 멤브레인 지지체의 분해성 조절 및 약물 담지 효과를 개선하기 위한 연구에서 다공도의 조절에 대한 기초적인 공정이 될 수 있다.