• 한국정보전자통신기술학회논문지
• /
• 제13권3호
• /
• pp.197-205
• /
• 2020

한국어는 자음과 모음과 같은 음소 단위의 발음은 고정되어 있고 표기에 대응하는 발음은 변하지 않기 때문에 외국인 학습자가 쉽게 접근할 수 있다. 그러나 단어와 어구, 문장을 말할 때는 음절과 음절의 경계에서 소리의 변동이 다양하고 복잡하며 표기와 발음이 일치하지 않기 때문에 외국어로서의 한국어 표준 발음 학습은 어려운 면이 있다. 그러나 영어 같은 다른 언어와 달리 한국어의 표기와 발음의 관계는 논리적인 원리에 따라 예외 없이 규칙화 할 수 있는 장점이 있으므로 발음오류에 대해 체계적인 분석이 가능한 것으로 여겨진다. 본 연구에서는 오류 발음과 표준 발음의 차이를 컴퓨터 화면상의 상대적 거리로 표현하여 시각화하는 모델을 제시한다. 기존 연구에서는 발음의 특징을 단지 컬러 또는 3차원 그래픽으로 표현하거나 입과 구강의 변화하는 형태를 애니메이션으로 보여 주는 방식에 머물러 있으며 추출하는 음성의 특징도 구간의 평균과 같은 점 데이터를 이용하는데 그치고 있다. 본 연구에서는 시계열로 표현되는 음성데이터의 특성 및 구조를 요약하거나 변형하지 않고 직접 이용하는 방법을 제시한다. 이를 위해서 딥러닝 기법을 토대로 자기조직화 알고리즘과 variational autoencoder(VAE) 모델 및 마코브 확률모델을 결합한 확률적 SOM-VAE 기법을 사용하여 클러스터링 성능을 향상시켰다.

• 자원환경지질
• /
• 제29권3호
• /
• pp.369-380
• /
• 1996

In order to determine the emplacement time and stratigraphic position of basaltic rocks in the central part of Pohang basin, palaeomagnetic investigations were conducted on 111 samples collected from 6 sites. Formation mean built from site-mean ChRM directions is $d=340.7^{\circ}$, $i=52.2^{\circ}$ (${\alpha}_{95}=6.0^{\circ}$, k=91) in the geographic coordinates. If "tilt" correction is applied regarding the plane perpendicular to the side walls of columnar joint as palaeohorizon, the formation mean becomes $d=328.7^{\circ}$, $i=43.8^{\circ}$ (${\alpha}_{95}=17.1^{\circ}$, k=13). It is to be noticed that the formation mean is deflected significantly (about $20{\sim}30^{\circ}$) counterclockwise from the Tertiary reference geomagnetic field of Eurasia, independent of "tilt" correction. This situation is very different from that of clockwise rotation of ChRM directions which has been ubiquitously observed in other Tertiary basins of south Korea, and indicates sinistral regional simple-shearing during the emplacement times of the basaltic rocks. Considering previous palaeomagnetic and AMS (anisotropy of magnetic susceptibility) data from other Tertiary regions of south Korea, the time of this sinistral shearing should be 15 Ma or directly thereafter, and this time point represents inversion from extensional to compressional tectonic regime. Magnetic foliation data obtained in this study indicate WNW-ESN compression during or directly after emplacement of the basaltic rocks, while it has known from regional tectonic study that the time of the WNW-ESN compression is about 15 Ma, when SW Honshu was rotated and the Korean strait was narrowed.

• 지역사회간호학회지
• /
• 제4권1호
• /
• pp.14-24
• /
• 1993

The Purpose of this study was to explore the condition of periodic medical examination and the health care services of industries in order to offer some basic data on developing industrial nursing care. To achieve this goal a self - administered questionnaire (developed by the academic affairs of community health nursing) was provieded to the nurses in 56 industries from Dec. 10, 1992 to Jan. 20, 1993. The statistical computer package, SPSS, was used to manipulate the data along with T-test and ANOVA. The results were as follows : 1. General characteristics: The greater part of the industries were manufacturing company, and below 300 employees of industry were 55.4%. The shift system was mostly one shift(66.1%) and three shift(23.2%), and 50.0% them organized the Industrial Safety and Health Commitee. Average a number of employees was 631 person. 2. Periodic Medical Examination: Most of the workers were receiving periodic medical examination from the designated hospital (95.71%). From the about 12.89% were gone through a colse medical examination. In colse medical examination 58.41% were decided 'C' and 36.73% were decided 'D'. About 6.23% off those who had any clinical findings were work-time shortening(7.84%), work-transition(8.12%), recoverating at home. The majority of the workers receive the result of the periodic medical examination individually (78.5%). 3. Special medical examination: The rate of those who are receiving special medical examination were 76.82% and about 8.24% were decided 'C' and 1.23% were decided 'D' Those who had any health problems were receiving follow-up checking (9.10%) and medical treatment while working (15.04%). The health managers in the company can consult (85.7%) those who had any suspicious sign and symptoms of occupational disease. 4. Health care services: The average score of health care services were 17.57 point out of 28 point, and the score was lower in health assessment and environmental hygiene than medical diagnosis and health education. There were significant differences in environmental hygine (F=3.72, P=0.017), health care services(F=3.94, P=0.013) according to the size of the size of the industries The other's significancy is not shown by any type of industrial nurse. The level of health care services were higher in the wokers who had better health and showed no singificant differences(T=-0.73, P=0.470).

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2007년도 추계 종합학술대회 논문집
• /
• pp.30-34
• /
• 2007

레이저는 단시간에 높은 정밀도로 다량의 측정을 행할 수 있는 장점을 지니며, 이의 구체적인 실현이 지상 LiDAR라고도 불리는 지상레이저 스캐너이다. 본 논문에서는 Z-F 레이저시스템을 사용하여 대상물의 3차원 레이저 측정, Point 데이터의 생성, Registration & Merging, Polygon 데이터의 생성, Surface 데이터 생성의 과정을 거쳐 수행된 고건축물의 3차원 모델링 결과에 대하여 기술한다. 문화재의 보존 및 복원을 위한 자료 기록 및 측정에 있어서 지상 레이저스캐너를 사용한 고건축물의 데이터베이스 구축기술은 문화유산의 복원 및 관련분야에 커다란 영향력으로 자리매김할 수 있을 것으로 사료된다.

• 산업공학
• /
• 제25권3호
• /
• pp.347-356
• /
• 2012

The acquisition cost of defense weapon system has been continuously increasing because of art-of-technology of it. This phenomenon requires efficiency and transparency in the weapon system acquisition process through cost estimation. Therefore cost estimation is very important to the government acquisition programs to support decisions about funding and to evaluate resource requirement as a key decision point. The Commercial parametric cost estimating models have been using extensively to obtain appropriate cost estimates in early acquisition phase. These models have many restrictions to ensure the cost estimating result in Korean defense environment because they are developed based on foreign R&D data. Also estimation results are different from Korean defense industry accounting system. So, some studies have been tried to develop a CER (Cost Estimation Relationship) based on the Korean historical data. However, there are some restrictions to improve the predictability and ensure the stability of the developed singular CERs which consider the following data characteristics individually. The the abnormal conditions of data that is multicollinearity, outlier and heteroscedasticity under rack of the number of observations. In this paper, a CER's Linear Combining Model is proposed to overcome those limitations which guarantee more accurate estimation (25.42% higher precision) than other singular CERs. At least, this study is meaningful as a first attempt to improve the predictability of CER with insufficient data. The methodology suggested in this study will be useful to develop a complex Korean version cost estimating model development in future.

• Restorative Dentistry and Endodontics
• /
• 제33권3호
• /
• pp.184-197
• /
• 2008

본 연구는 3차원 유한요소분석법적 연구를 통해 쐐기형 비우식성 치경부병소의 복합레진수복에서 다른 탄성계수를 가진 복합레진의 혼합수복이 5급 수복물의 응력분포에 미치는 영향에 대해 알아보고자 하였다. 발거된 상악 제2소구치를 Micro-CT로 스캔한 후 3D-DOCTOR로 3차원유한요소 모형을 제작하였다. 제작된 소구치 모형에 쐐기형 와동과 변형시킨 와동을 형성하고 각 와동을 탄성계수가 서로 다른 혼합형 복합레진 또는 흐름성 복합레진으로 수복하였다. 수복 전, 후 협측교두와 설측교두에 500N의 하중을 가한 후 응력분포를 ANSYS 프로그램을 이용하여 주 응력 분석법으로 평가한 결과 치아 및 수복물에 위해한 인장응력을 고려할 때 탄성계수가 높은 재료로 와동저선각을 수복하고 교합측변연과 치경부측 변연은 탄성계수가 낮은 재료로 수복하는 혼합수복법이 쐐기형 비치경부병소의 수복에 있어 가장 유리하였다.

• 태양에너지
• /
• 제11권3호
• /
• pp.44-52
• /
• 1991

본 연구의 목적은 주거용 태양열 온수이용에 있어서 성층저장의 잠점을 평가하고 최적의 설계변수를 제시하되 실험이 아닌 시뮬레이션을 통한다는 것이다. 그 결과는 다음과 같으며 실험의 결과들과 잘 일치함을 보였다. 1. 탱크의 성층분활이 증가함에 따라서 태양부하율이 증가함을 보여 주었고 본 연구에서는 평균 10% 정도 증가함을 나타내었다. 2. 저장탱크의 높이 대 지름의 비가 3정도일 때가 태양부하율이 최대가 되었으며 그 이상이 되면 감소하는 경향을 나타내었다. 3. 집열기로 부터 저장탱크로 유입되는 온수의 유동율이 증가할 수록 완전혼합저장에서는 태양부하율이 증가하지만 성충저장에서는 유입율이 감소하는 것이 태양부하율을 증가시키는 결과가 되었다. 4. 이와 같은 결과로 성층축열시스템 전체적으로는 약 17%의 성능 향상을 기대할 수 있다.

• 사상체질의학회지
• /
• 제26권4호
• /
• pp.350-364
• /
• 2014

Objectives This study was aimed to find the significant features of face form according to the Taeeumin and Soyangin by analyzing the three-dimensional face information data. Also, making standard face of the Taeeumin and Soyangin was an object of this study. Methods We collected three-dimensional face data of patients aged between 20~45 years old diagnosed by a specialist of Sasang constitutional medicine. The data were collected using a 3D scanner, Morpheus 3D(Morpheus Corporation, KOREA). Extracting a face feature point total of 64, was set to 332 pieces(height, angle, ratio, etc.) of each variable between feature points. ANOVA test were used to compare the characteristics of subjects according to the Taeeumin and Soyangin. Results When not to consider gender, the Taeeumin and Soyangin were different from the 18 items(3 items in the ear, 9 items in the eye, 1 item in the nose, 1 item in the mouth, 4 items in the jaw). When to consider gender, the Taeeumin and Soyangin men were different from the 6 items(1 item in the ear, 2 items in the nose, 3 items in the face). And the Taeeumin and Soyangin women were different from 17 items(1 item in the ear, 10 items in the eye, 2 items in the nose, 1 item in the mouth, 3 items in the face). Conclusions These results show Taeeumin's face(both men and women) width of the right and left is larger than the length of the top and bottom. Compared to men of Soyangin, men of Taeeumin has greater wings of the nose. Compared to women of Soyangin, women of Taeeumin has longer length of the eye. Soyangin's face(both men and women) length of the top and bottom is larger than the width of the right and left. Compared to men of Taeeumin, men of Soyangin has smaller wings of the nose. Compared to women of Taeeumin, women of Soyangin has more stereoscopic facial features at the top and bottom of the lateral face. Also, by accumulating three-dimensional face data, this study modeled the standard facial features by Taeeumin and Soyangin. These results may be helpful in the development of Sasang constitutional diagnostics utilizing the characteristics of the facial form at later.

• The Journal of Advanced Prosthodontics
• /
• 제15권5호
• /
• pp.227-237
• /
• 2023

PURPOSE. This study aimed to assess and compare the color stability, flexural strength (FS), and surface roughness of occlusal splints fabricated from heat-cured acrylic resin, milled polymethyl methacrylate (PMMA)-based resin, and 3D-printed (PMMA) based-resin. MATERIALS AND METHODS. Samples of each type of resin were obtained, and baseline measurements of color and surface roughness were recorded. The specimens were divided into three groups (n = 10) and subjected to distinct aging protocols: thermomechanical cycling (TMC), simulated brushing (SB), and control (without aging). Final assessments of color and surface roughness and three-point bending test (ODM100; Odeme) were conducted, and data were statistically analyzed (2-way ANOVA, Tukey, P <.05). RESULTS. Across all resin types, the most significant increase in surface roughness (Ra) was observed after TMC (P < .05), with the 3D-printed resin exhibiting the lowest Ra (P < .05). After brushing, milled resin displayed the highest Ra (P < .05) and greater color alteration (∆E₀₀) compared to 3D-printed resin. The most substantial ∆E₀₀ was recorded after brushing for all resins, except for heat-cured resin subjected to TMC. Regardless of aging, milled resin exhibited the highest FS (P < .05), except when compared to 3D-printed resin subjected to TMC. Heat-cured resin exposed to TMC demonstrated the lowest FS, different (P < .05) from the control. Under control conditions, milled resin exhibited the highest FS, different (P < .05) from the brushed group. 3D-printed resin subjected to TMC displayed the highest FS (P < .05). CONCLUSION. Among the tested resins, 3D-printed resin demonstrated superior longevity, characterized by minimal surface roughness and color alterations. Aging had a negligible impact on its mechanical properties.

• 지적과 국토정보
• /
• 제53권1호
• /
• pp.47-63
• /
• 2023

서울시는 도시에서 발생하는 다양한 문제를 해결하고 대시민 서비스 등을 위해 디지털트윈 기반의 도시 공간정보를 구축 및 운영하고 있다. 이러한 디지털트윈 도시 구현을 위한 공간정보의 안정적인 활용을 보장하기 위한 필수요소 2가지는 자료의 최신성과 품질이다. 그러나 높은 품질의 도시 공간정보에 대해 지속적인 최신성을 유지하는 것은 많은 시간과 비용이 필요하다. 이를 극복하기 위하여 효율적인 도시 공간정보 구축 기술과 구축 데이터의 운영, 관리 및 갱신 절차를 연구하였다. 우선, 최신 하이브리드센서를 활용한 포인트 클라우드 중심의 자동 3차원 건물 제작 기술을 실증하여 적용하였고, 고점밀도 항공라이다 성과를 이용하여 수준 높은 건물 모델을 자동제작이 가능함을 확인하였으며, 효율적인 데이터 관리 방안을 수립하였다. 지역별 차별화된 제작 방법의 적용, 공간 객체 고유 관리번호를 통한 도시 변화지역 탐지 지원하고, 수준별 국제표준자료 제작으로 도시 공간정보의 활용성을 강화하였다. 본 연구를 통해 디지털트윈 기반의 도시 공간정보 활성화를 고민하는 지방자치단체 및 관련 기관의 사업 추진에 좋은 선례가 될 수 있을 것으로 판단되며, 도시 단위 디지털트윈 구현의 인프라 정보로써 공간정보의 구축 및 관리에 대한 논의가 지속적으로 이루어 질 것을 기대한다.