• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2004.11a
• /
• pp.305-310
• /
• 2004

The building below standard scales to be built only by constructive report to authorities. Construction law 8 illustrates that supervision should be deployed in all the construction sites at the building which is found to have more than 3 floors and also to have more than $200m^2$ of total squares in especially outside area of city plan zone. Such a small construction is have a important and the most basic meaning. Many problems were found to occur in all the constructive places which were out of the limit of this law. The construction sites were found to be controlled by public official's visiting without supervisors and designers of architecture. Technique of construction in architecture was found to be not different from that of 1980. The security of employees in construction on sites has a serious problem. Because of choosing all the materials of the building without a reasonable point. All the building were found to have a law material about inside and outside aspects. The purpose of this study are to examine existing law about a small project and than to analyze the situation of constructive control through questionnaires and interviews with all the supervisors. Based on the data base of engineers who had a great experience in construction sites, The purpose of this study is also to suggest and advise the method of controlling all the items in architecture through on and off line.

• Geophysics and Geophysical Exploration
• /
• v.10 no.3
• /
• pp.191-202
• /
• 2007

To identify the detailed attenuation structure in the southern Korean Peninsula, a numerical test was conducted for the Q tomography inversion to be applied to the accumulated dataset until 2005. In particular, the stochastic pointsource ground-motion model (STGM model; Boore, 2003) was adopted for the 2D Q tomography inversion for direct application to simulating the strong ground-motion. Simultaneous inversion of the STGM model parameters with a regional single Q model was performed to evaluate the source and site effects which were necessary to generate an artificial dataset for the numerical test. The artificial dataset consists of simulated Fourier spectra that resemble the real data in the magnitude-distance-frequency-error distribution except replacement of the regional single Q model with a checkerboard type of high and low values of laterally varying Q models. The total number of Q blocks used for the checkerboard test was 75 (grid size of $35{\times}44km^2$ for Q blocks); Q functional form of $Q_0f^{\eta}$ ($Q_0$=100 or 500, 0.0 < ${\eta}$ < 1.0) was assigned to each Q block for the checkerboard test. The checkerboard test has been implemented in three steps. At the first step, the initial values of Q-values for 75 blocks were estimated. At the second step, the site amplification function was estimated by using the initial guess of A(f) which is the mean site amplification functions (Yun and Suh, 2007) for the site class. The last step is to invert the tomographic Q-values of 75 blocks based on the results of the first and second steps. As a result of the checkerboard test, it was demonstrated that Q-values could be robustly estimated by using the 2D Q tomography inversion method even in the presence of perturbed source and site effects from the true input model.

• Restorative Dentistry and Endodontics
• /
• v.33 no.1
• /
• pp.1-8
• /
• 2008

The purpose of this study was to evaluate the effect of a new resin monomer, filler size and polishing technique on the surface roughness of composite resin restorations using confocal laser scanning microscopy. By adding new methoxylated Bis-GMA (Bis-M-GMA, 2,2-bis[4-(2-methoxy-3-methacryloyloxy propoxy) phenyl] propane) having low viscosity, the content of TEGDMA might be decreased. Three experimental composite resins were made: EX1 (Bis-M-GMA/TEGDMA = 95/5 wt%, 40 nm nanofillers); EX2 (Bis-M-GMA/TEGDMA = 95/5 wt%, 20 nm nanofillers); EX3 (Bis-GMA/TEGDMA = 70/30 wt%, 40 nm nanofillers). Filtek Z250 was used as a reference. Nine specimens (6 mm in diameter and 2 mm in thickness) for each experimental composite resin and Filtek Z250 were fabricated in a teflon mold and assigned to three groups. In Mylar strip group, specimens were left undisturbed. In Sof-lex group, specimens were ground with #1000 SiC paper and polished with Sof-lex discs. In DiaPolisher group, specimens were ground with #1000 SiC paper and polished with DiaPolisher polishing points. The Ra (Average roughness), Rq (Root mean square roughness), Rv (Valley roughness), Rp (Peak roughness), Rc (2D roughness) and Sc (3D roughness) values were determined using confocal laser scanning microscopy. The data were statistically analyzed by Two-way ANOVA and Tukey multiple comparisons test (p = 0.05). The type of composite resin and polishing technique significantly affected the surface roughness of the composite resin restorations (p < 0.001). EX3 showed the smoothest surface compared to the other composite resins (p < 0.05). Mylar strip resulted in smoother surface than other polishing techniques (p < 0.05). Bis-M-GMA. a new resin monomer having low viscosity, might reduce the amount of diluent, but showed adverse effect on the surface roughness of composite resin restorations.

• Journal of Technologic Dentistry
• /
• v.31 no.4
• /
• pp.45-52
• /
• 2009

This study is analyzed to conduct better on-site practices with recognizing importance of the clinical practice of Dept. of dental technology and use it as a basic material in the clinical practice. Target people who are students studying dental technology in D college in Daegu were questioned by survey. Study results below 1. Average score of the survey about satisfaction of the operating method of clinical practice shows 3.26. In detail elements, 'credit assignment(10 credits)' is 3.65 as the highest score, 'execution period(vacation)' is 3.50, 'choice of the clinical practice organization' is 3.25, 'measures after practice' is 2.98 and 'pre-education' is 2.98 as the lowest score. 2. Through the real clinical practice, 'experience of new equipments and technology' is 3.64 as the highest score, 'choice of lecturer' is 3.61, 'guidance way' is 3.49, 'contents properness' is 3.44, 'environment of practice organization' is 3.36, 'evaluation way' is 3.35 and 'practical use of the evaluation material' is 3.18 as the lowest score. 3. The average score of survey about satisfaction after clinical practice of the participated students is 3.46 that is higher than both 'satisfaction about operating method(3.26)' about clinical practice of college and 'satisfaction about organization(3.44)' about environment of dental craft organizations and labs, guidance way of lecturer and evaluation. 4. In the improvement of distribution of the clinical practice evaluation, in the 'practice organization: college' viewpoint, '7:3' is 35.77% as the highest response, '6:4' is 25.20%, '8:2' is 22.76% and '4:6' is 16.26 in regular sequence. 5. In site evaluation reflection of clinical practice, 50% reflection is 32.93% as the highest percentage, 60% reflection is 26.83%, 20% reflection is 20.73% and 80% reflection is 6.10% in regular sequence. In attendance score, it shows percentage of reflecting 50% and 40% is 26.98%, students wanting to reflect 30% is 25.40%, reflecting 10% is 20.63% and no reflecting is 0%. In result of the analyzed data, clinical practice has to be studied more in considering that clinical practice is important point in education of Dept. of Dental Technology and also problems in college and on-site practice need improvements.

• Journal of Intelligence and Information Systems
• /
• v.18 no.2
• /
• pp.19-28
• /
• 2012

After the internet era, we are moving to the ubiquitous society. Nowadays the people are interested in the multimodal interaction technology, which enables audience to naturally interact with the computing environment at the exhibitions such as gallery, museum, and park. Also, there are other attempts to provide additional service based on the location information of the audience, or to improve and deploy interaction between subjects and audience by analyzing the using pattern of the people. In order to provide multimodal interaction service to the audience at the exhibition, it is important to distinguish the individuals and trace their location and route. For the location tracking on the outside, GPS is widely used nowadays. GPS is able to get the real time location of the subjects moving fast, so this is one of the important technologies in the field requiring location tracking service. However, as GPS uses the location tracking method using satellites, the service cannot be used on the inside, because it cannot catch the satellite signal. For this reason, the studies about inside location tracking are going on using very short range communication service such as ZigBee, UWB, RFID, as well as using mobile communication network and wireless lan service. However these technologies have shortcomings in that the audience needs to use additional sensor device and it becomes difficult and expensive as the density of the target area gets higher. In addition, the usual exhibition environment has many obstacles for the network, which makes the performance of the system to fall. Above all these things, the biggest problem is that the interaction method using the devices based on the old technologies cannot provide natural service to the users. Plus the system uses sensor recognition method, so multiple users should equip the devices. Therefore, there is the limitation in the number of the users that can use the system simultaneously. In order to make up for these shortcomings, in this study we suggest a technology that gets the exact location information of the users through the location mapping technology using Wi-Fi and 3d camera of the smartphones. We applied the signal amplitude of access point using wireless lan, to develop inside location tracking system with lower price. AP is cheaper than other devices used in other tracking techniques, and by installing the software to the user's mobile device it can be directly used as the tracking system device. We used the Microsoft Kinect sensor for the 3D Camera. Kinect is equippedwith the function discriminating the depth and human information inside the shooting area. Therefore it is appropriate to extract user's body, vector, and acceleration information with low price. We confirm the location of the audience using the cell ID obtained from the Wi-Fi signal. By using smartphones as the basic device for the location service, we solve the problems of additional tagging device and provide environment that multiple users can get the interaction service simultaneously. 3d cameras located at each cell areas get the exact location and status information of the users. The 3d cameras are connected to the Camera Client, calculate the mapping information aligned to each cells, get the exact information of the users, and get the status and pattern information of the audience. The location mapping technique of Camera Client decreases the error rate that occurs on the inside location service, increases accuracy of individual discrimination in the area through the individual discrimination based on body information, and establishes the foundation of the multimodal interaction technology at the exhibition. Calculated data and information enables the users to get the appropriate interaction service through the main server.

• Journal of Korean Society on Water Environment
• /
• v.36 no.2
• /
• pp.125-136
• /
• 2020

In this study, we identified the major pollution-zones of the mainstream and its tributaries of Gongneung stream and investigated their pollution sources based on water quality, flowrate and pollution-load data of the stream having the characteristics of the urban-rural complex to examine the effect of the tributaries on the water quality changes in the mainstream. The water quality and flowrate data were collected for 10 months (2018 ~ 2019) at 3 points of mainstream and ten tributaries. Water quality index (WQI), load duration curve (LDC), discharge load density (DLD)and delivery ratios for each tributary were obtained so as to investigate the pollution characteristics and some of the information visualized on GIS. The main pollution-zone in the Gongneung stream was in the middle and lower streams, and the tributaries that may affect the pollution of the area were JS, JY, SL and SM. JS and SL had low WQI levels (34.7/37.5) and DLD (kg/d/㎢) of BOD and T-P were relatively high in JY (99.2/6.00) and SL (60.0/2.07). BOD and T-P delivery ratios in JS were high (0.94/0.83), suggesting that JS had significant influence on the water quality of the main pollution-zone in the Gongneung stream. Meanwhile, SM having a high T-P delivery ratio (0.97) was found to be more affected by the non-point source due to the higher LDC excess rate (%) in the low flow compared to high flow. This study provides basic data on the water quality and pollution characteristics of the Gongneung stream, and the analysis results are expected to be used as examples for identifying the main pollution-zone and tributaries of stream and their pollution sources.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.3
• /
• pp.183-195
• /
• 2020

Purpose: The purpose of this study is to compare the flexural strength of CAD/CAM denture base resins with conventional denture base resins based on their thicknesses. Materials and Methods: For the conventional denture base resins, Lucitone 199^® (C-LC) was used. DIOnavi - Denture (P-DO) and DENTCA Denture Base II (P-DC) were taken for the 3D printing denture base resins. For the prepolymerized PMMA resins, Vipi Block Gum (M-VP) and M-IVoBase^® CAD (M-IV) were used. The final dimensions of the specimens were 65.0 mm x 12.7 mm x 1.6 mm / 2.0 mm / 2.5 mm. The 3-point bend test was implemented to measure the flexural strength and flexural modulus. Microscopic evaluation of surface of fractured specimen was conducted by using a scanning electron microscope (SEM). After testing the normality of the data, one-way ANOVA was adopted to evaluate the differences among sample groups with a significance level of P = 0.05. The Tukey HSD test was performed for post hoc analysis. Results: Under the same thicknesses, there are significant differences in flexural strength between CAD/CAM denture base resins and conventional denture base resins except for P-DO and C-LC. M-VP showed higher flexural strength than conventional denture base resins, P-DC and M-IV displayed lower flexural strength than conventional denture base resins. Flexural modulus was highest in M-VP, followed by C-LC, P-DO, P-DC, M-IV, significant differences were found between all materials. In the comparison of flexural strength according to thickness, flexural strength of 2.5 mm was significantly higher than that of 1.6 mm in C-LC. Flexural strength of 2.5 mm and 2.0 mm was significantly higher than that of 1.6 mm in P-DC and M-VP. In M-IV, as the thickness increases, significant increase in flexural strength appeared. SEM analysis illustrates different fracture surfaces of the specimens. Conclusion: The flexural strength of different CAD/CAM denture base resins used in this study varied according to the composition and properties of each material. The flexural strength of CAD/CAM denture base resins was higher than the standard suggested by ISO 20795-1:2013 at a thickness of 1.6 mm or more though the thickness decreased. However, for clinical use of dentures with lower thickness, further researches should be done regarding other properties at lower thickness of denture base resins.

• Progress in Medical Physics
• /
• v.29 no.1
• /
• pp.8-15
• /
• 2018

This work reports the acceptance testing and commissioning experience of the Robotic Intensity-Modulated Radiation Therapy (IMRT) M6 system with a newly released $InCise^{TM}2$ Multileaf Collimator (MLC) installed at the Yonsei Cancer Center. Acceptance testing included a mechanical interdigitation test, leaf positional accuracy, leakage check, and End-to-End (E2E) tests. Beam data measurements included tissue-phantom ratios (TPRs), off-center ratios (OCRs), output factors collected at 11 field sizes (the smallest field size was $7.6mm{\times}7.7mm$ and largest field size was $115.0mm{\times}100.1mm$ at 800 mm source-to-axis distance), and open beam profiles. The beam model was verified by checking patient-specific quality assurance (QA) in four fiducial-inserted phantoms, using 10 intracranial and extracranial patient plans. All measurements for acceptance testing satisfied manufacturing specifications. Mean leaf position offsets using the Garden Fence test were found to be $0.01{\pm}0.06mm$ and $0.07{\pm}0.05mm$ for X1 and X2 leaf banks, respectively. Maximum and average leaf leakages were 0.20% and 0.18%, respectively. E2E tests for five tracking modes showed 0.26 mm (6D Skull), 0.3 mm (Fiducial), 0.26 mm (Xsight Spine), 0.62 mm (Xsight Lung), and 0.6 mm (Synchrony). TPRs, OCRs, output factors, and open beams measured under various conditions agreed with composite data provided from the manufacturer to within 2%. Patient-specific QA results were evaluated in two ways. Point dose measurements with an ion chamber were all within the 5% absolute-dose agreement, and relative-dose measurements using an array ion chamber detector all satisfied the 3%/3 mm gamma criterion for more than 90% of the measurement points. The Robotic IMRT M6 system equipped with the $InCise^{TM}2$ MLC was proven to be accurate and reliable.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.5
• /
• pp.580-586
• /
• 2000

Data collected between 1981 and 1991 at the Philippine Carabao Center at Central Luzon State University (PCC-CLSU) were used for the comparison of growth, milk yield and draughtability of Murrah-Philippine crossbred and Philippine native buffaloes. Body weights and body measurements were available at 3-month intervals from birth to 36 months of age for a total of 34 $Murrah{\times}Philippine$ native buffalo F1 crossbreds (CBB; 21 cows, 13 bulls) and 32 Philippine native buffaloes (PNB; 16 cows, 16 bulls). Lactation records were available for 14 CBB and 19 PNB cows. Data for draughtability under wet and dry ploughing conditions were available for 4 CBB and 4 PNB steers. The results indicate that crossbreds grow faster (0-9 months of age: cows $442{\pm}19$ vs. $301{\pm}21g/day$, bulls $305{\pm}23$ vs. $296{\pm}21g/day$; 9-36 months of age: cows $227{\pm}10$ vs. $147{\pm}12g/day$, bulls $282{\pm}13$ vs. $138{\pm}12g/day$), mature earlier and produce more milk (1st lactation: $1139{\pm}153$ vs. $450{\pm}112kg$; 2nd lactation: $1115{\pm}132$ vs. $488{\pm}136kg$) than native buffaloes, but have a poorer draughtability (wet ploughing; force as % of body weight $8.8{\pm}0.2$ vs. $12.2{\pm}0.6$; dry ploughing: cut depth $10.98{\pm}0.25$ vs. $11.92{\pm}0.13cm$, velocity $0.50{\pm}0.03$ vs. $0.60{\pm}0.02m/sec$, force as % of body weight $9.0{\pm}0.6$ vs. $11.3{\pm}0.7$). The correlation coefficients between body weight and body measurements at birth and at 3-month intervals indicate that heart girth has a relatively high correlation with body weight, especially in crossbreds. It is concluded that in Philippine smallholder farming systems in which meat and milk production are secondary to draught power, the native buffalo is preferable from the point of view of input needed to maintain the number of animals kept for a required draught force.

• Fashion & Textile Research Journal
• /
• v.9 no.6
• /
• pp.581-588
• /
• 2007

The purposes of this study are to look into the formative characteristics of the miniskirt and to evaluate the visual effects and images according to changes in the silhouette and length of the miniskirt from analyzing the mini skirt style shown in 2007 S/S domestic fashion. The miniskirt style shown in 2007 S/S domestic fashion was analyzed with pictures from a fashion website "Interfashion Planning" from Feb. to May of 2007. As a result, the basic lines of the miniskirt are classified into two types according to the side line. The lengths of miniskirts are classified into five steps of 25 cm, 27.5 cm, 30 cm, 32.5 cm, and 35 cm from the natural waistline. The stimuli were produced with imaginative sewing system 3D CAD of i-design series. For the visual evaluation according to changes in the silhouettes and length of the miniskirt, we used 13 pairs of items to find the visual effects, and 23 pairs of adjectives to measure the visual images. The stimuli and adjectives were randomly given to the evaluators and were evaluated by the 7-point likert type scale. Data we got from this experiment was analyzed statistically by using the SPSS 12.0 and practiced the Factor Analysis and Correlation Analysis. Formative characteristics of miniskirts can be found in the lines, colors, and materials that are the elements of fashion designs, colors and materials are the characteristics of the cloth that is the medium of the expression of designs. The result of factor analysis of visual effects and visual images according to changes in the silhouettes and lengths of miniskirts, the visual effect was composed of the three factors of the length of the lower body, the thickness of the lower body, and the shape abdomen and it was showed that these three factors occupied 63.6% of the total variance. The visual image was composed of four factors of elegance, personality, attraction, maturity and these four factors got 67.6% of the total variance.