• Journal of the Korean Geotechnical Society
• /
• v.23 no.3
• /
• pp.25-40
• /
• 2007

Excessive earth pressure is one of the major mechanical factors in the deformation and damage of Cut-and-Cover Tunnel lining in shallow tunnels and portals of mountain tunnels (Kim, 2000). Excessive earth pressure may be attributed to insufficient compaction and consolidation of backfill material due to self-weight, precipitation and vibration caused by traffic (Komiya et al., 2000; Taylor et al., 1984; Yoo, 1997). Even though there were a lot of tests performed to determine the earth pressure acting on the tunnel lining, unfortunately there were almost no case histories of studies performed to determine remedial measures that reduce differential settlement and excessive earth pressure. In this study the installation of geotextile mat was selected to reduce the differential settlement and excessive earth pressure acting on the cut-and-cover tunnel lining. In order to determine settlement and earth pressure reduction effect (reinforcement effect) of geotextile mat reinforcement, laboratory tunnel model tests were performed. This study was limited to the modeling of rigid circular cut-and-cover tunnel constructed at a depth of $1.0D\sim1.5D$ in loose sandy ground and subjected to a vibration frequency of 100 Hz. Model tests with varying soil cover, mat reinforcement scheme and slope roughness were performed to determine the most effective mat reinforcement scheme. Slope roughness was adjusted by attaching sandpaper #100, #400 and acetate on the cut slope surface. Mat reinforcement effect of each mat reinforcement scheme were presented by the comparison of earth pressure obtained from the unreinforced and mat reinforced model tests. Soil settlement reduction was analyzed and presented using the Picture Analysis Method (Park, 2003).

• Korean Journal of Acupuncture
• /
• v.17 no.1
• /
• pp.47-65
• /
• 2000

The meridian, the meridian point and the Acupuncture-Bu-Xie(鍼灸補瀉) of oriental medicine are very important in the Department of Acupuncture and Moxibustion. Until now it has been confused at the practical use, and it showed up many transformation to the ages and many scholars. And then, I made a study of effects on the thermal changes of Sangyang($LI_1$,商陽), Igan($LI_2$,二間), Samgan($LI_3$,三間), Hapkok($LI_4$,合谷), Yanggye($LI_5$,陽谿), Kokchi($LI_{11}$,曲池), Yonghyang($LI_{20}$,迎香) following acupuncture on the Hapkok with the Rotated Acupuncture-Bu-Xie(捻轉補瀉) stimulation. This study researched into clinical statistics for 140 men who are in good health, and they are studying oriental medicine at Woosuk university in Korea. This study was covered a period of 3 months form June, 1999 to August, 1999. The objective was divided into seven groups, those are the control group(CON, N=20), the acupuncture stimulation group with non-rotation on Hapkok of left hand(A-I, N=20), the acupuncture stimulation group with non-rotation on non-meridian point(NA) of left hand(A-II, N=20), the acupuncture stimulation group with Bu-rotation(捻轉補法) on Hapkok of left hand(B-I, N=20), the acupuncture stimulation group with Bu-rotation on non-meridian point(NA) of left hand(B-II, N=20), the acupuncture stimulation group with Xie-rotation(捻轉瀉法) on Hapkok of left hand(C-I, N=20), and the acupuncture stimulation group with Xie-rotation on non-meridian point of left hand(C-II, N=20). The first, I took a picture for 140 men with the Digital infrared thermal image(D.I.T.I.). After 10 minutes, I took a second picture for each group following experimental methods, those were followed acupuncture on the Hapkok and the non-meridian point with the retentive and Rotated Acupuncture-Bu-Xie stimulation. The results are summarized as follows : 1. The thermal changes of the area which is a meridian point in the Large Intestine Meridian of the acupuncture stimulation group on Hapkok different from the control groups with significantly change. 2.The thermal changes of the area which is a meridian point in the Large Intestine Meridian of acupuncture stimulation groups on non-meridian point was not significantly different from the control group. 3. The thermal changes of the area which is a meridian point in the Large Intestine Meridian of the acupuncture stimulation group with Bu-rotation on Hapkok different from the control group with significant increase. 4. The thermal changes of the area which is a meridian point in the Large Intestine Meridian of acupuncture stimulation group with Bu-rotation on non-meridian point was not significantly different from the control group. 5. The thermal changes of the area which is a meridian point in the Large Intestine Meridian of the acupuncture stimulation group with Xie-rotation on Hapkok different from the control group with significant decrease and increase following the decreasing or increasing temperature class, and the increasing temperature class of the acupuncture stimulation group with Xie-rotation on Hapkok significantly different from the acupuncture stimulation group with Bu-rotation on Hapkok. 6. The thermal changes of the area which is a meridian point in the Large Intestine Meridian of acupuncture stimulation group with Xie-rotation on non-meridian point was not significantly different from the control group. As a conclusion, I could think that the acupuncture stimulation with Bu-rotation or Xie-rotation on Hapkok affected the thermal change of the area which is a meridian point in the Large Intestine Meridian. And then I could relate these results with the existence of the meridian and meridian point, and with the Rotated Acupuncture-Bu-Xie theory of oriental medicine.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.3
• /
• pp.96-109
• /
• 2011

Recently, the geographic information system(GIS) is generally used in various fields with the development of information and communication technology, with expansion of its applications and utilization scope. Especially, utilizing GIS is expected to have positive effects on the geography learning and more helpful for the geographic information observation compared to the picture or 2D based media. The effective visualization of complex geographic data does not only take realization of its visual information but also increases the human ability in analysis and understanding to use the geographic information. In this paper, we examine a method to develop the geography learning contents based on the technology with augmented reality and GIS, and then we have a case study for various kinds of visualization techniques and examples to use in geography learning situation. Moreover, we introduce an example of the manufacturing process from the existing GIS data to augmented reality based geography learning system. From the above, we show that the usefulness of our method is applicable for effective visualization of the three-dimensional geographic information in the geography learning environment.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.9
• /
• pp.139-147
• /
• 2022

The goal of this study is to develop a mobile application so that a person who is new to chemistry can easily acquire the knowledge necessary for chemical structure learning using image tracking technology. The point of this study is to provide a new chemical structure learning experience by recognizing a two-dimensional picture, augmenting the chemical structure into a three-dimensional object, showing it on the user's screen, and using a service that simultaneously provides related information in multiple fields. characteristic. Login API and real-time database technology were used for safe and real-time data management, and an application was developed using image tracking technology for image recognition and 3D object augmentation service. In the future, we plan to use the chemical structure data library to efficiently load and output data.

• Clinical and Experimental Reproductive Medicine
• /
• v.10 no.2
• /
• pp.25-37
• /
• 1983

As the cytogenetic developed, cytogenetic study has also developed progressively. This study is a systematical cytogenetic and clinico-hormonal analysis of 20 cases Wp.ere gonadal dysgenesis was diagnosed and deferred to the Dept. of obstetrics and Gynecology, Yonsei University, Medical School from Jan. 1974 to Aug. 1983. Twenty patients with the diagnosis of gonada dysgenesis have been assesed as to possible correlations between clinical, homonal and cytogenic findings. The desults were as follows; l. Gonadal dysgenesis were found in 20 cases, consisting of 15 cases (75%) of turnurs syndrome, 4 case of pure gonadal dysgenesis (20%), 46. XX and 1 case of mixed gonadal dysgenesis, 45,XO/46,XY. 2. Patients with XO karyotype, turner's ryndorme, have a resonably constant clinical picture of sexual infantilism with streak gonads, short status and webbed neck. 3. 17 cases were found primary amenorhea and two cases were noted with 2 ndary amenorrhea. one case has been presented with menstruation. 4. The rudimentary streak gonads were found in 7 cases of 8 cases and one case has a rudimentary streak gonad on one side and a testis on the contralateral side. 5. The study showed that potients with gonadal dysgenesis had an average of about 4-8 times higher basal FSH and about 3-7 times higher basal LH than that of the early follicular phase of normal menstrual cycle. 6. Two cases of three gonadal dysgenesis patieats, who performed LH-RH challage test, showed that the serum FSH levels reached the maximal level at 30 min after injection of CHRH and the serum LH level reached the maximal level at 60 min ofter injection of LHRH one case showed no significant response to LH-RH injection. Thus, bu studying simultoneously the clinical, cytogenic, hormonal aspects and visualization of gonads, we have gained some practical insight into the requirements for proper disgnosis and treatment.

• Journal of Satellite, Information and Communications
• /
• v.7 no.3
• /
• pp.145-148
• /
• 2012

In applying LCD to TV application, one of the most significant factors to be improved is image sticking on the moving picture. LCD is different from CRT in the sense that it's continuous passive device, which holds images in entire frame period, while impulse type device generate image in very short time. To reduce image sticking problem related to hold typedisplay mode, we made an experiment to drive TN-LCD like CRT. We made articulate images by turn on-off backlight, and we realized the ratio of Back Light on-off time by counting between on time and off time for video signal input during 1 frame (16.7ms). Conventional CCFL (cold cathode fluorescent lamp) cannot follow fast on-off speed, so we evaluated new fluorescent substances of light source to improve residual light characteristic of CCFL. We realized articulate image generation similar to CRT by CCFL blinking drive and TN-LCD overdriving. As a result, reduced image sticking phenomenon was validated by naked eye and response time measurement.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.8
• /
• pp.3083-3093
• /
• 2010

The number of Free-Form construction projects are increased by development of 3D parametric modeling technology. The reason of Free-Form Architecture's appearance is advance of digital technology. BIM simulation decision making support is inefficient because it is used in virtual reality. In this study, we developed "AR naviX" which is the digital contents of construction management based on AR for effective decision making support to Free-Form construction project. It reflects construction site by using site picture and video, or Laser scanning data. User feel high reality and is absorbed in augmented reality. So they can reduce the time of decision.

• Journal of the Korean Dietetic Association
• /
• v.15 no.3
• /
• pp.278-285
• /
• 2009

The purpose of this pilot study was to examine the feasibility of using digital pictures to assess individuals' nutrient intakes from school lunch. The subjects for the study were 29 male students and 40 female students from two classes in a middle school located in Daejeon Metropolitan City, Korea. The school lunch service was self-operated and the students were allowed to portion the foods by themselves. The teacher in charge of each class took digital pictures of every student's lunch plate that was tagged with an i.d. number, before and after eating for two consecutive days. The researchers estimated the amount of food, which an individual actually consumed by comparing pre- and post-pictures of their plate with reference food pictures for better visual estimation of the food amounts. Individual energy and nutrient intakes were calculated using CAN-Pro (ver 3.0) using the food intake data visually estimated from the digital pictures and school lunch recipes. The teachers in charge reported that about 10~15 additional minutes were needed to take the pictures used for the study and this additional time did not place much burden on the service process during the lunch period. The results showed that the students' actual energy and nutrient intakes from the same school lunch menus were quite varied as the serving portions were not regulated and left-overs were not prohibited. This pilot study suggests that examination of individual nutrient intake using digital picture is a feasible method in the context of school lunch service.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.2
• /
• pp.89-98
• /
• 2004

In this paper, we implement a digital holographic security card system that combines digital holographic memory using random phase encoded reference beams with electrical biometrics. Digitally encoded data including a document, a picture of face, and a fingerprint are recorded by multiplexing of holographic memory. A random phase mask encoding reference beams are used as a decoded key to protect illegal counterfeit. As a result, we can achieve a raw BER of 3.6${\times}$10-4 and shift selectivity of 4${\mu}{\textrm}{m}$ using the 2D random phase mask. Also, we develop a recording pattern and image processing which are suitable for a low cost reader without a position sensing photo-detector for real time data extraction and remove danger of fraud from unauthorized person by comparing the reconstructed holographic data with the live fingerprint data.

• Journal of Korea Society of Industrial Information Systems
• /
• v.27 no.2
• /
• pp.35-44
• /
• 2022

In this paper, we propose an intra-picture prediction method by a quadratic surface modeling method for depth video coding. The pixels of depth video are transformed to 3D coordinates using distance information. A quadratic surface with the smallest error is found by least square method for reference pixels. The reference pixel can be either the upper pixels or the left pixels. In the intra prediction using the quadratic surface, two predcition values are computed for one pixel. Two errors are computed as the square sums of differences between each prediction values and the pixel values of the reference pixels. The pixel sof the block are predicted by the reference pixels and prediction method that they have the lowest error. Comparing with the-state-of-art video coding method, simulation results show that the distortion and the bit rate are improved by up to 5.16% and 5.12%, respectively.