• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2010.06a
• /
• pp.303-305
• /
• 2010

실내공간의 특성을 고려하여 u-GIS 서비스를 제공하기 위해서는 그에 맞는 적절한 모델과 질의처리 방법이 필요하다. 프리즘 모델은 실내공간을 표현하기 위한 3차원 기하 모델이며, 이에 대한 질의처리 방법이 제안된 바 있다. 하지만 이에 대한 실험적 근거가 부족하므로, 본 논문에서는 프리즘 모델의 질의 처리 방법을 적용한 시스템과 B-Rep 기반의 3차원 공간 DBMS 시스템간의 연산 수행을 비교 실험하였다. 그 결과 프리즘 모델 기반의 질의처리 방법이 B-Rep 기반의 공간 DBMS 보다 질의 처리 성능이 우수한 것으로 검증되었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.05c
• /
• pp.79-83
• /
• 2001

This is an investigation on the propagation characteristics of AE signal in GIS. The selection of measuring position and resonant frequency of AE sensor is one of the most important factor to optimize a diagnostic system. And natural frequency and harmonic response characteristics are indispensable to optimize those factors. So, in this investigation, we make a 3D model of 362kV GIS and make a modal and harmonic analysis to survey the vibro-acoustic property. Through the result of the analysis, we can make a further understanding on the vibro-acoustic characteristics of GIS.

• Journal of Mechanical Science and Technology
• /
• v.20 no.10
• /
• pp.1607-1613
• /
• 2006

GIS (Gas Insulated Switchgear) is used in electric power system to insure non conductivity, breaking capacity and operating reliability. In the present study, dynamic analysis on the closing resistors of the GIS has bees carried out by the commercial dynamic analysis code COSMOS MOTION and 3-D modeling program SOLID WORKS. In order to find the minimum value of chatter vibration of closing resistors, the motion of moving and fixed resistor parts of closing resistors were simulated by varying the spring constant, the damping coefficient and the mass of moving and fixed resistor parts. The simulated results were compared with experimental results. The application of the results could reduce chatter vibration of closing resistors of the GIS. These data are also useful on the development of future model GIS with minimum chatter vibration for the determinations of the spring constant, the damping coefficient and mass of a moving part.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.4
• /
• pp.41-48
• /
• 2008

Currently used 3D models, which are mostly focused on visualization of 3D objects and lack topological structure, have limitation in being used for 3D spatial analyses and applications. However, implementing a full topology for the indoor spatial objects is less practical due to the increase of complexity and computation time. This study suggests an alternative method to build a 3D indoor model with less complexity using a spatial DBMS. Storing spatial and nonspatial information of indoor spaces in DB tables enables faster queries, computation and analyses. Also it is possible to display them in 2D or 3D using the queried information. This study suggests a 2D-3D hybrid data model, which combines the 2D topology constructed from CAD floor plans and stored in a spatial DBMS and the 3D visualization functionality. This study showed the process to build the proposed model in a spatial DBMS and use spatial functions and queries to visualize in 2D and 3D. And, then, as an example application, it illustrated the process to build an indoor evacuation simulator.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.10
• /
• pp.1842-1847
• /
• 2006

This paper is the environmental impact assessment of at road design in the light of the sense for the real from the virtual reality. For In this papers, This study developed 3D-model and virtual reality contents by suggesting the environmental impact assessment based on GIS in the road design. Ant through this process, it's possible to visualize the environmental impact assessment by constructing the 3D-model and simulation. The 3D-model can be a method to show the road effectively by maximizing the road's shape visually after the construction. The main construction which composes polyhedron model that is generated from digital map and aerial photo is built by mapping the real texture, so the Sense for the Real was more heightened. Through this study, it must be made to shorten a long time exhausting period of conference and construct more real road after due scene consideration by specific and various low-cost strategy in the environmental impact assessment afterwards.

• Spatial Information Research
• /
• v.19 no.1
• /
• pp.93-105
• /
• 2011

In recent years, large and complex three-dimensional building has been constructed by the development of building technology and advanced IT skills, and people have lived there and spent a considerable time so far. Accordingly. in this sophisticatcd three-dimensional space, emergencies services or convenient information services have been in demand. In order to provide these services efficiently, understanding of topological relationships among the complex space should be supported naturally. Not on1y each method of understanding the topological relationships but also its efficiency can be different depending on different topological data models. B-rep based data model is the most widely used for storaging and representing of topological relationships. And from early 2000s, many researches on a network based topological data model have been conducted. The purpose of this study is to verify the efficiency of performance on spatial queries. As a result, Network-based topological data model is more efficient than B-rep based data model for determining the spatial relationship.

• Journal of Korean Society for Atmospheric Environment
• /
• v.13 no.6
• /
• pp.463-474
• /
• 1997

Metallic elements in dustfall have been known as notable air pollutants directly or indirectly influencing human health and wealth. The first aim of this study was to obtain precise spatial distribution patterns of 5 elements (Pb, Zn, K, Cr, and Al) in dustfall around Suwon area. To predict isometric lines of metal fluxes deposited on unsupervised random sites, the study has applied both spatial statistics as a receptor model and a GIS (geographic information system). Total of 31 sampling sites were selected in the study area (roughly 3 by 3 km grid basis) and dustfall samples were then collected monthly basis by the British deposit gauges from Dec., 1995 to Nov., 1996. The metallic elements in the dustfall were then analyzed by an atomic absorption spectrometer (AAS). On the other hand, a base map overlapped by 7 layers was constructed by using the AutoCAD R13 and ARC/INFO 3.4D. Four different spatial interpolation and expolation techniques such as IDW (inverse distance weighted averaging), TIN (triangulated irregular network), polynomial regression, and kriging technique were examined to compare spatial distribution patterns. Each pattern obtained by each technique was substantally different as varing pollutant types, land of use types, and topological conditions, etc. Thus, our study focused intensively on uncertainty analysis based on a concept of the jackknife and the sum of error distance. It was found that a kriging technique was the best applicalbe in this study area.

• The KIPS Transactions:PartB
• /
• v.16B no.6
• /
• pp.451-462
• /
• 2009

The spread of satellite image increases various services using it. Especially, 3D visualization services of the whole earth such as $Google\;Earth^{TM}$ and $Virtual\;Earth^{TM}$ or 3D GIS services for several cities provide realistic geometry information of buildings and terrain of wide areas. These service can be used in the various fields such as urban planning, improvement of roads, entertainment, military simulation and emergency response. The research about extracting the building and terrain information effectively from the high-resolution satellite image is required. In this paper, presents a system for effective extraction of the building model from a single high-resolution satellite image, after examine requirements for building model extraction. The proposed system utilizes geometric features of satellite image and the geometric relationship among the building, the shadow of the building, the positions of the sun and the satellite to minimize user interaction. Finally, after extracting the 3D building, the fact that effective extraction of the model from single high-resolution satellite will be show.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.4
• /
• pp.170-180
• /
• 2010

With development of the earth's subsurface space, the need for a reliable subsurface spatial model such as a cross-section, boring log is increasing. However, the ground mass was essentially uncertain. To generate model was uncertain because of the shortage of data and the absence of geotechnical interpretation standard(non-statistical uncertainty) as well as field environment variables(statistical uncertainty). Therefore, the current interpretation of the data and the generation of the model were accomplished by a highly trained experts. In this study, a geotechnical ontology model was developed using the current expert experience and knowledge, and the information content was calculated in the ontology hierarchy. After the relative distance between the information contents in the ontology model was combined with the distance between cluster centers, a cluster analysis that considered the geotechnical semantics was performed. In a comparative test of the proposed method, k-means method, and expert's interpretation, the proposed method is most similar to expert's interpretation, and can be 3D-GIS visualization through easily handling massive data. We expect that the proposed method is able to generate the more reasonable subsurface spatial information model without geotechnical experts' help.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.3
• /
• pp.48-56
• /
• 2004

This research focuses on the development of a fast datum transformation model to be used in GIS that utilizes real-time data transformation. Instance, when a GIS data constructed according to a datum is conformed to another datum, instead of transforming the axes of the original data, the data is transformed right before the results are reflected on the monitor. In this research, the prospects of calculating transformation parameters for every grid cells on the area based on two-dimensional conformal transformation model in order to decrease real-time datum transformation time while maintaining a high accuracy has been investigated. Research results showed that for a fixed area, the accuracies of the two-dimensional conformal transformation and the three-dimensional datum transformation, which requires more computing time, were almost equal and fast transformation speed, high accuracy real-time datum transformation is made feasible by implementing the grid-divided two-dimensional conformal transformation model.