• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.792-795
• /
• 2007

To quantify irregular body motions the time series analysis was applied to the gait study. The motions obtained from gait experiment are complex to exhibit nonlinear behaviors. The purpose of this study is to measure quantitatively the characteristics of the major six joints of the body during walking. The gait experiments were carried out for eighteen young males walking on a motor driven treadmill. Joint motions were captured using eight video cameras, and then three dimensional kinematics of the neck and the upper and lower extremities were computed by KWON 3D motion analysis software. The largest Lyapunov exponent was calculated from the time series to quantify stabilities of each joint. The results provides a data set of nonlinear dynamic characteristics for six joints engaged in normal walking.

• 대한기계학회논문집A
• /
• 제31권8호
• /
• pp.889-895
• /
• 2007

Quantifying dynamic stability is important to assessment of falling risk or functional recovery for leg injured people. Human locomotion is complex and known to exhibit nonlinear dynamical behaviors. The purpose of this study is to quantify major joints of the body using chaos analysis during walking. Time series of the chaotic signals show how gait patterns change over time. The gait experiments were carried out for ten young males walking on a motorized treadmill. Joint motions were captured using eight video cameras, and then three dimensional kinematics of the neck and the upper and lower extremities were computed by KWON 3D motion analysis software. The correlation dimension and the largest Lyapunov exponent were calculated from the time series to quantify stabilities of the joints. This study presents a data set of nonlinear dynamic characteristics for eleven joints engaged in normal level walking.

• 한국운동역학회지
• /
• 제13권3호
• /
• pp.133-149
• /
• 2003

The purposes of present study were to determine the major check-points of golf swing from the review of previous studies, and to suggest additional information on the teaching theory of golf. The golf swing motion of 6 male and female elite university golf players were filmed with 16mm Locam II high speed cameras at the speed of 200f/s, and variables such as time, displacement, angle, velocity were calculated and analyzed by 3D Cinematography using DLT method. The results were: 1. Differences were shown in the ratio of weight distribution on the feet, cocking angle, take-back velocity, club-head velocity at impact depending upon the physical characteristics and club used for swing. 2. Time for the down-swing and impact were $0.27{\sim}0.29s$ in men and $0.29{\sim}0.32s$ in women, which was 1/3 of the time for the back-swing. Women showed longer total swing time than men because of longer time in back-swing, follow-through and finish. 3. Men showed larger range of motion in shoulder and knee joints than women, on the other hand women showed larger range of motion in hip joint than men. 4. Cocking motion and right elbow flexion were occurred at the top of back-swing and cocking release was occurred at the moment of impact. Maximum rotations of shoulder and hip joints were found between the top of back-swing and down-swing phase. 5. Women showed lower back-swing velocity than men, and men showed higher club velocity(men: $38.2{\sim}38.6m/s$, women: $35.1{\sim}36.4m/s$) than women.

• 대한견주관절학회:학술대회논문집
• /
• 대한견주관절학회 2009년도 제17차 학술대회
• /
• pp.175-175
• /
• 2009

Despite its importance for the understanding of joint kinematics in vivo, there has been few studies about shoulder joints. The purpose of this study is to analyze the glenohumeral joint during internal and external rotation at 90 degrees of abduction using in vivo noninvasive motion analysis system. MRI was performed for the following seven positions from maximum internal rotation to maximum external rotation at intervals of 30 degrees. We used 3D-gradient echo sequencing (TR: 12 ms, TE: 5.8 ms, 0.8 mm-slice thickness). Our method is based on matching three-dimensional MR images by the similarity of the image intensity. We analyzed the in vivo three-dimensional motions of the glenohumeral and scapulothoracic joint during this motion. In scapla plane, the mean rotation angle of the glenohumeral join was 105.5 degrees ($SD{\pm}39.0^{\circ}$). The mean rotation angle of the scapulothracic joint was 27.5 degrees ($SD\;{\pm}\;7.7^{\circ}$). The contribution ratio is almost 3.8:1 of glenohumeral and scapulothracic joint respectively.

• 대한한의학회지
• /
• 제18권1호
• /
• pp.25-39
• /
• 1997

Shoulder hand syndrome is characterized by pain, vasomotor instability, and tenderness, mainly in the distal upper extremity. The pathophysiologic mechanism of this syndrome is not yet proved. The purpose of this study is to evaluate the usefulness of thermographic imaging on shoulder hand syndrome after stroke for early diagnosis and its clinical pattern analysis including acupuncture and electroacupuncture therapy. This study was performed from June to September in 1996 on 46 stroke patients who were admitted at Oriental hospital of Kyung Hee Medical Center. The study group were 23 patients with shoulder hand syndrome. The control group were 23 patients without shoulder hand syndrome. Skin temperatures on the both upper extremities were measured by Digital Infrared Thermographic Imaging(D.I.T.I.) before the study and 3 weeks later again. The results were as follows; 1. The shoulder hand syndrome group were significantly more restricted in shoulder passive range of motion than the control group. 2. The shoulder hand syndrome group showed significant temperature difference of both dorsal hands. 3. The electroacupunture therapy group were significantly more improved on the temperature difference of both dorsal hands than acupuncture therapy group in 3 weeks later. 4. Both posterior arms showed the biggest temperature difference from 11 to 30 days in shoulder hand syndrome group. 5. The lesser passive ROM(range of motion) of shoulder group showed significantly increased temperature difference of both hands. The above results show that measurement of shoulder passive range of motion and D.I.T.I. is a useful method for early diagnosis on shoulder hand syndrome and its clinical pattern analysis including evaluation of acupuncture and electroacupuncture therapy. Continuous study will be needed for more clinical application and evaluation on shoulder hand syndrome.

• 한국산학기술학회논문지
• /
• 제22권6호
• /
• pp.583-590
• /
• 2021

본 연구는 아날로그 3D펜의 디지털화에 대한 연구이다. 디지털은 항상성과 변형가능성, 결합성, 재생산성 그리고 보관의 편리성 등의 특징이 있다. 이런 디지털 특성과 생산을 융합한 장치가 3D프린터인데 낮은 생산성과 재료, 물리적 특성의 한계로 산업적 활용이 제한적이다. 특히 3D프린터를 사용하기 위하여 필요한 모델링 소프트웨어 및 프린터 장치에 대한 전문기술로 인하여 사용자 접근성이 떨어지는 등의 개선 점이 있다. 이것을 보완한 3D펜은 휴대성과 사용용이성이 뛰어난 반면 디지털화가 불가능하다는 한계점이 있다. 따라서 디지털화 능력과 사용편이성을 확보하고 프린팅공정 중 유해성 논란이 있는 프린팅 재료의 안전성을 확보하기 위하여 푸드를 결합하여 연구문제와 대안을 도출하였으며 개발한 3D펜을 통하여 디지털화를 실증하였다. 3D펜의 디지털화를 위하여 구조화된 장치를 통하여 아날로그적 3D펜의 움직임을 감지하는 센서를 특정하고 이 움직임을 공간해석 알고리즘을 통하여 3차원 데이터인 X,Y,Z 좌표값으로 변환하였다. 이를 증명하기 위하여 Meshlab v1.3.4을 이용하여 시각화하고 유사성을 확인하였다. 향후 이 장치(푸드펜)을 통하여 청소년 교육 및 시니어헬스케어 프로그램에 활용할 수 있을 것으로 기대한다.

• 한국운동역학회지
• /
• 제23권4호
• /
• pp.295-306
• /
• 2013

The purpose of this study was to provide high school male shot putters training methods of gliding and delivery motion through comparative analysis of kinematic characteristics. To accomplish this purpose, three dimensional motion analysis was performed for the subjects(PKC, KKH, YDL) who participated in high school male shot putter competition on 92nd (2011), 93rd (2013) National Sports Festival. The subjects were filmed by four Sony HXR-MC2000 video cameras with 60 fields/s. The three-dimensional kinematic data of the glide, conversion and delivery phase were obtained by Kwon3d 3.1 version. The data of the shoulder rotational angles and projection angles were calculated with Matlab R2009a. The following conclusions had been made. With the analysis of the gliding and stance length ratio, the gliding length was shorter at the TG than the SG with short-long technique but the gliding and stance length ratio was 46.8:53.2% respectively. The deviation of the shots trajectory from APSS(Athlete-plus-shot-system) revealed that the PKC showed similar to "n-a-b-c-I" of skilled S-shape type, KKH and YDL showed "n-a-d-f-I'" of unskilled type. Furthermore, they showed smaller radial distance from the central axis of the APSS and the shots were away from the linear trajectory. From this characteristics, The PKC who performed more TG than SG had shorter glide with S-shape of APSS(skilled type) showed the better record than others with technical skill. But KKH and YDL had bigger glide ratio with "n-a-d-f-I'" of unskilled type and improved their records with technical factor. The projection factor had an effect on the record directly. Because PKC maintained more lower glide and transition posture with momentum transfer through COG's rapid horizontal velocity respectively the subject possessed the characteristics of high horizontal and vertical velocity with large turning radius from shot putter to APSS.

• 전자공학회논문지
• /
• 제53권12호
• /
• pp.180-190
• /
• 2016

본 전향적 예비 임상연구를 통하여 이중 체임버 구조를 기반으로 하는 뇌졸중 환자용 컵을 개발하고 임상적으로 유용한지 검증하고자 했다. 체계적 과정을 거쳐 컵을 개발하고, 남녀 동수의 뇌졸중 환자 16명을 대상으로 개발된 컵을 사용하여 이들의 제한된 운동기능을 보완 할 수 있는지 3차원 동작 분석(3-dimensional motion analysis), 표면 근전도 검사(surface electromyography; sEMG), 3차원 체간 움직임 분석(3-dimensional trunk movement analysis)의 운동 형상학적 방법을 통하여 검증하고자 했다. 실험 결과, 이중 체임버 컵(dual chamber based assistive cups; DC) 데이터 그룹에서 플라시보 컵(placebo-cups; PC)의 경우 보다 어깨부위의 ROM(range of motion)이 더 적게 사용되었고, sEMG에서는 상부 승모근, 삼각근, 삼두근에서 근 활성도가 낮게 나타났다. 체간 분석에서 전방, 후방의 방향에서 체간의 개입이 더 적게 관찰되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.823-824
• /
• 2006

This paper proposes a novel structured 3-DOF(Degree-of-Freedom) spherical motor. 3-DOF spherical motor presents some attractive features by combining pitch, roll, yaw motion in a single joint. The proposed motor has pole which is electromagnetic in stator and rotor. poles produce magnetic flux through by exciting current then produce torque. We show a novel structured rotor to avoid mechanical overlapping of each coil in rotor. The validity of the analysis is confirmed by 3D finite element method.

• 대한기계학회논문집A
• /
• 제30권11호
• /
• pp.1408-1416
• /
• 2006

A mathematical knee model was constructed using MADYMO. The purpose of this study is to present a more realistic model of the human knee to reproduce human knee motion. Knee ligaments were modeled as line elements and the surrounding muscles were considered as passive restraint elements. A calf-free-drop test was performed to validate the suggested model. A calf was dropped from the rest at about 65 degree flexed posture in the prone position. The motion data were recorded using four video cameras and then three dimensional data were acquired by Kwon3D motion analysis software. The results showed that general shapes of angular quantities were similar in both the experiment and computer simulation. Functional stability of the anterior cruciate ligament was explicitly revealed through this model.