• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권6호
• /
• pp.537-553
• /
• 2016

This paper addresses the safety of two-row tank design by performing the extensive sloshing model tests. Owing to the uncertainties entangled with the scale law transforming the measured impact pressure up to the full scale one, so called comparative approach was taken to derive the design sloshing load. The target design vessel was chosen as 230 K LNG-FPSO with tow-row tank arrangement and the reference vessel as 138 K conventional LNG carrier, which has past track record without any significant failure due to sloshing loads. Starting with the site-specific metocean data, ship motion analysis was carried out with 3D diffraction-radiation program, then the obtained ship motion data was used as 6DOF tank excitation for subsequent sloshing model test and analysis. The statistical analysis was carried out with obtained peak data and the long-term sloshing load was determined out of it. It was concluded that the normalized sloshing impact pressure on 230 K LNG-FPSO with two-row tank arrangement is higher than that of convectional LNG carrier, hence requires the use of reinforced cargo containment system for the sake of failure-free operation without filling limitation.

• 한국운동역학회지
• /
• 제16권1호
• /
• pp.109-117
• /
• 2006

The purpose of this study was done in order to investigate the Kinematical variables of the Rybalko motion on the Horizontal bar using the 3-dimensional cinematographic method. For this study, three excellent athletes take part in a 2003 Daegue universid game were chosen. The subject,s Rybalko motion was filmed with S-VHS camera at the speed of 60 fields per second and digitized the each fields. And the Kwon3D 3.1 version program was employed to obtain 3-dimensional data. As a result of this study. 1. A total time spent for performing Rybalko skill was Mean $2.52{\pm}0.13sec$. From starting down swing to releasing right hand the Mean $0.84{\pm}0.24sec$ was taken. 2. In the event 3 of Rybalko motion, that is, the moment which the right-hand is released on the bar, the center of mass must is employed at the position above the horizontal line of bar. In this research, the average vertical displacement(z axe) of center of mass shows $47.87{\pm}3.14cm$. 3. In the event 5, that is, the moment which the right-hand is catched again on the bar, the center of mass is employed at the position before the vertical line of bar. In this research, the average horizontal displacement(z axe) of center of mass shows $47.87{\pm}3.14cm$. 4. It has been seen that, at the moment of release of right-hand, lateral variation of center of mass is 13.395cm, vertical variation of center of mass is 7.41cm Thus, it is concluded that lateral variation of center of mass should be reduced for high grade to be acquired. 5. It has been founded that high speed of down swing influences speed of up swing, and that, in the motion of twist, the horizontal speed is little changed.

• 방송공학회논문지
• /
• 제8권3호
• /
• pp.297-305
• /
• 2003

본 논문에서는 저비트율 부호화에 적합한 웨이블릿 기반의 고속 움직임 예측 기법을 제안한다. 제안한 논문에서는 웨이블릿 계수의 차이를 기반으로 한 중요 블록(significant block : SB) 정보를 사용하여 움직임이 존재하는 블록에 대해 선택적으로 움직임 예측함으로써 움직임 벡터의 수가 증가하는 MRME(multiresolution motion estimation)의 단점을 보완할 수 있었다. 또한 웨이블릿 변환의 특성 중 하나인 해상도 분할 특성을 이용하여 quarter-band까지 움직임을 예측하게 되고, 이에 대한 보간작업으로 영상을 재구성한다. 선택적 움직임 추정과 움직임 보상된 quarter-band의 보간작업을 통해 고주파 부대역에서 존재할 수 있는 예측 오차를 줄일 수 있었으며, 동시에 계산량도 감소시킬 수 있었다. 제안된 기법은 기존의 기법과 비교하여 약 70% 이상의 계산량을 감소시킬 수 있었으며, 영상의 화질 면에서도 0.1 ∼ 1.2dB 정도 향상되어 거의 대등한 PSNR을 유지하는 것을 모의 실험을 통하여 확인하였다.

• 대한물리의학회지
• /
• 제13권1호
• /
• pp.99-105
• /
• 2018

PURPOSE: The aim of this study was to evaluate the concurrent validity and clinical usefulness of the universal plastic goniometer to measure the range of motion of the internal and external rotation of the hip joint using the three dimensional motion analysis which can analyze the joints and segment movements in the most objective and quantitative method. METHODS: Clinical and kinematic data were collected from thirty individuals using a universal plastic goniometer and a ten camera motion analysis system. Passive hip rotation range was obtained three trials for left and right hip joints using two measure methods simultaneously. RESULTS: There were significant differences between all matching measures of the two measures of internal and external rotation of the hip joint (p<.05). The relationship between the two tests for all measurements of the internal and external rotation of the hip was statistically significant with correlation coefficient form r=.87 to .96. (p<.01). CONCLUSION: Clinical measurement of the internal and external rotation of the hip using a universal plastic goniometer is effective to assess the hip condition. However, application of universal plastic goniometer requires careful attention in more accurate evaluation and research verification of the internal and external rotation of hip joint.

• 한국운동역학회지
• /
• 제15권4호
• /
• pp.97-104
• /
• 2005

Previous studies of kinematic analysis of golf swing usually dealt with variations vertically. The purpose of the study was to examine the horizontal hip joints motion of the fifteen male professional golfers during driver swinging. Kinematic variables were calculated by the Kwon3D motion analysis program. Paired t-tests and one-way ANOVA were used to compare the hip height, distance, displacement, and position differences. Results showed that there were no hip height changes and no hip height differences between left and right hip from address to impact. The axis of the backswing was braced right hip, the axis of the downswing was moving left hip. Hips position at the top of the backswing showed that hips move to target prior to hands, which means the sequential motion of the chain linked body segments. From address to impact, left hip moving distance was longer than right hip(p<.001), but during the whole swing, right hip moving distance was longer than left hip(p<.001). Hip rotation angle to target line was $-48.14{\pm}9.32^{\circ}$ at top of the backswing, $40.88{\pm}8.44^{\circ}$ at impact, and $104.70{\pm}8.14^{\circ}$ at finish.

• Journal of Computational Design and Engineering
• /
• 제3권3호
• /
• pp.250-265
• /
• 2016

Owing to our rapidly aging society, accessibility evaluation to enhance the ease and safety of access to indoor and outdoor environments for the elderly and disabled is increasing in importance. Accessibility must be assessed not only from the general standard aspect but also in terms of physical and cognitive friendliness for users of different ages, genders, and abilities. Meanwhile, human behavior simulation has been progressing in the areas of crowd behavior analysis and emergency evacuation planning. However, in human behavior simulation, environment models represent only "as-planned" situations. In addition, a pedestrian model cannot generate the detailed articulated movements of various people of different ages and genders in the simulation. Therefore, the final goal of this research was to develop a virtual accessibility evaluation by combining realistic human behavior simulation using a digital human model (DHM) with "as-is" environment models. To achieve this goal, we developed an algorithm for generating human-like DHM walking motions, adapting its strides, turning angles, and footprints to laser-scanned 3D as-is environments including slopes and stairs. The DHM motion was generated based only on a motion-capture (MoCap) data for flat walking. Our implementation constructed as-is 3D environment models from laser-scanned point clouds of real environments and enabled a DHM to walk autonomously in various environment models. The difference in joint angles between the DHM and MoCap data was evaluated. Demonstrations of our environment modeling and walking simulation in indoor and outdoor environments including corridors, slopes, and stairs are illustrated in this study.

• 대한핵의학회지
• /
• 제39권3호
• /
• pp.174-181
• /
• 2005

목적: 호흡게이트PET(이하 RGPET)을 이용하여 호흡에 의한 PET영상의 인공산물의 감소 효과를 호흡모형 팬톰을 제작하여 분석하였다. 특히 4D-CT를 시행하여 얻은 동일 호흡위상의 CT영상을 이용하여 RGPET의 감쇠 보정에 이용할 수 있도록 CT영상을 재구성하는 방법을 제시하였다. 대상 및 방법: 반복주기 6초, 진동 폭 26mm의 운동 팬톰에 각각 3 ml syringe와 10, 30 ml의 vial에 18.5 MBq (0.5 mCi) 18-F FDG를 주입한 후, 게이트의 유무에 따라 Discovery ST (GE Medical System, Milwaukee. WU) PET-CT 스캐너를 사용하여 PET/CT스캔을 시행하였다. 이때 호흡추적장치로는 적외선 CCD카메라 방식의 Real-Time Position Management (Varian Medical Systems, Palo Alto, CA)을 사용하였다. 호흡게이트PET 및 4D-CT스캔은 10% 호흡위상백분위 별로 총 10세트의 영상을 각각 획득하였다. 이와 같이 운동주기를 10개의 소 구간으로 분할하여 얻은 PET과 CT영상으로부터 각 물체의 위치를 분석하였고, 물체의 크기에 따른 운동 인공산물의 크기와 PET 계수 값의 감소간의 상관관계를 분석하였다. 결과: RGPET과 4D-CT상에서 물체의 중심위치를 호흡위상별로 분석한 결과, 오차범위 내에서 실제 위치와 잘 일치하였다. 게이트를 시행하지 않은 PET에서 관측된 물체의 크기는 상대적 운동크기에 비례하여 증가하여, 운동범위가 물체 크기의 2배가 되면 부피를 2.5배 가량 과대 평가하였다. 반면, 최대 uptake수치는 50% 가량 줄었다. 결론: RGPET을 통해 PET영상에서 나타나는 호흡으로 인한 인공산물의 대부분을 제거할 수 있음을 확인할 수 있었으며, 4D-CT스캔을 통해 획득한 동일위상의 CT 영상을 이용하여 보다 정확한 감쇠 보정 및 영상융합 결과를 얻었다.

• 대한인간공학회지
• /
• 제21권3호
• /
• pp.59-79
• /
• 2002

The purposes of the study were to present the optimum slacks pattern for elementary school girls and to compare and evaluate wearing ease of the slacks. 3D scans using the Cyberware PS motion platform were carried out for 3 subjects who have different body type. The automatic drafting method was programmed by AutoLISP in CAD. Wearing tests using 3D Scanner was done for evaluation of fitness of slacks. Regression analysis, analysis of variance and post-hoc test were performed for statistical analysis of the data by SPSS program. The procedure and results were as follows: The slacks construction components for pattern drafting were derived from 10 horizontal section maps obtained from 3D scans. The automatic drafting was based on the measurements of slacks construction components and the curve of crotch line. The crotch line was drafted using of the arc function in AutoCAD. The total crotch length was calculated using the multiple regression equation. Wearing test represented that the slacks pattern developed to accomodate individual body measurements was estimated more highly than existing patterns.

• 한국운동역학회지
• /
• 제17권1호
• /
• pp.69-79
• /
• 2007

The purpose of this study was to examine the characteristics of throwing motion in the elementary school students from the developmental point of view. For the purpose of this, total of nine subjects(each of three students in five, third, and first grades) were participated. They were asked to throw the ball as far as they can and the motions were videotaped with the 30frames/sec and 1/500 shutter speed. The successful motions for each subject were selected for three dimensional analysis. The collected data were analyzed using DV express 1.0 and Kwon3D 3.0 softwares. The results obtained from this study were as follows; 1. Total time for the throwing motion of the first grade was longer than that of the fifth and third grades. 2. The resultant displacement and velocity of COM for the fifth and third grades were greater than that of the frist grade. 3. The first grade tended to flex the trunk forward excessively during the throwing motion. 4. The fifth grade tended to place the upper arm close to the sagital plane and move the forearm and hand freely. 5. Looking at the greater variability of the angular velocity of the hand segment, the fifth grade seemed to have faster and more flexible movement of the wrist. 6. There were somewhat differences in the patterns and magnitudes of ground reaction forces among the different grades.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권5호
• /
• pp.234-241
• /
• 2002

An optical pickup actuator is an objective-lens-moving mechanism that provides a means to follow the disk displacement accurately(1). In this paper, a slim type optical pickup actuator for Notebook PCs is analyzed and designed to improve the driving sensitivity A three dimensional equivalent magnetic circuit network method (3D-EMCN method) is proposed for an analysis method which provides better characteristics in both precision and computation time of analysis comparing with a commercial three-dimensional finite element (3D-FEM) codes. To verify the validity of proposed method, we made a comparison between the analysis results and the experimental ones. We also compared this analysis results with 3D-FEM results. Among the several optimal algorithm, we adopt a niching genetic algorithm, which renders a set of the multiple optimal solutions. RCS (Restricted Competition Selection) niching genetic algorithm is used for optimal design of the actuator's performance. Recently, the pickup actuator needs additional driving structure for radial and tangential tilting motion to obtain better pick-up performance. So we applied the proposed method to the model containing tilting coils.