• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11C
• /
• pp.940-947
• /
• 2010

Motion Compensated Frame Interpolation(MCFI) has been used to reduce motion jerkiness for dynamic scenes and motion blurriness for LCD-panel display as post processing for high quality display. However, MCFI that directly uses the motion information often suffers from annoying artifacts such as blockiness, ghost effects, and deformed structures. So in this paper, we propose a novel edge-based adaptively weighted vector median filter as post-processing. At first, the proposed method generates an edge direction map through a sobel mask and a weighted maximum frequent filter. And then, outlier MVs are removed by average of angle difference and replaced by a median MV of $3{\times}3$ window. Finally, weighted vector median filter adjusts the weighting values based on edge direction derived from spatial coherence between the edge direction continuity and motion vector. The results show that the performance of PSNR and SSIM are higher up to 0.5 ~ 1 dB and 0.4 ~ 0.8 %, respectively.

• Journal of electromagnetic engineering and science
• /
• v.9 no.2
• /
• pp.98-104
• /
• 2009

An InGaP/GaAs MMIC LC VCO designed with Harmonic Noise Frequency Filtering(HNFF) technique is presented. In this VCO, internal inductance is found to lower the phase noise, based on an analytic understanding of phase noise. This VCO directly drives the on-chip double balanced mixer to convert RF carrier to IF frequency through local oscillator. Furthermore, final power performance is improved by output amplifier. This paper presents the design for a 1.721 GHz enhanced LC VCO, high power double balance mixer, and output amplifier that have been designed to optimize low phase noise and high output power. The presented asymmetric inductance tank(AIT) VCO exhibited a phase noise of -133.96 dBc/Hz at 1 MHz offset and a tuning range from 1.46 GHz to 1.721 GHz. In measurement, on-chip down-converter shows a third-order input intercept point(IIP3) of 12.55 dBm, a third-order output intercept point(OIP3) of 21.45 dBm, an RF return loss of -31 dB, and an IF return loss of -26 dB. The RF-IF isolation is -57 dB. Also, a conversion gain is 8.9 dB through output amplifier. The total on-chip down-converter is implanted in 2.56${\times}$1.07 mm$^2$ of chip area.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.6
• /
• pp.519-522
• /
• 2008

As industry of a semiconductor and LCD industry have been rapidly growing, precision technologies of machining such as etching and 3D measurement are required. Stylus has been important measuring method in traditional manufacturing process. However, its disadvantages are low measuring speed and damage possibility at contacting point. To overcome mentioned disadvantage, non-contacting measurement method is needed such as PMP(Phase Measuring Profilometry), WSI(white scanning interferometer) and Confocal Profilometry. Among above 3 well-known methods, WSI started to be applied to FPD(flat panel display) manufacturing process. Even though it overcomes 21t ambiguity of PMP method and can measure objects which has specular surface, the measuring speed and vibration coming from manufacturing machine are one of main issue to apply full automatic total inspection. In this study, We develop high speed WSI system and algorithm to reduce unknown noise. The developing WSI and algorithm are implemented to measure 3D surface of wafer. Experimental results revealed that the proposed system and algorithm are able to measure 3D surface profile of wafer with a good precision and high speed.

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.11_12
• /
• pp.705-716
• /
• 2005

There exist many feature point detection algorithms that developed in pattern recognition research . However, interactive applications for the pen-input displays such as Tablet PCs and LCD tablets have set different goals; reliable segmentation for different drawing styles and real-time on-the-fly fieature point defection. This paper presents a curvature estimation method crucial for segmenting freeHand pen input. It considers only local shape descriptors, thus, peforming a novel curvature estimation on-the-fly while drawing on a pen-input display This has been used for pen marking recognition to build a 3D sketch-based modeling application.

• Transactions of Materials Processing
• /
• v.16 no.8
• /
• pp.596-602
• /
• 2007

LGP (Light Guiding Plate) of LCD-BLU (Liquid Crystal Display - Back Light Unit) is one of the major components that affect the product quality of LCD. The optical patterns of LGP(2.2") molds are fabricated by three different methods, namely, (1) laser ablation, (2) chemical etching and (3) LiGA-reflow, respectively. The characteristics of surface patterns and roughnesses of molds and injection molded parts were compared to evaluate the optical characteristics. The optical patterns of injection molded LGP with mold fabricated by LiGA - reflow method showed the best geometric structure. The surface roughness (Ra) of LGP#s with molds fabricated by (1) laser ablation: $Ra={\sim}31nm$, (2) chemical etching: $Ra={\sim}22nm$, and (3) LiGA-reflow: $Ra={\sim}4nm$.

• Journal of Information Display
• /
• v.4 no.4
• /
• pp.1-3
• /
• 2003

For excimer laser annealing (ELA), energy density, number of pulses, beam uniformity, and condition of initial amorphous Si (a-Si) films are significant factors contributing to the final microstructure and the performance of low-temperature polycrystalline Si (LTPS) TFTs. Although the process and equipment have been significantly improved, the environmental factors associated with initial amorphous Si (a-Si) films and process conditions are yet to be optimized.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.1
• /
• pp.85-91
• /
• 2008

White light scanning interferometry has gotten a firm position in 3D surface profile measuring field. Recently, the LCD industry gave a chance for this technology to enter into real industry fields. It is known that white-light phase-shifting algorithm give a best resolution compare to other algorithms, but there are some problems to be resolved. One of them is 300nm jump in height profile, called bat-wing effect. The main reason of this problem is an ambiguity of phase-peak detection algorithm, and some solution has been proposed, but it didn't work perfectly. In this paper, I will show the cases when these effects are occurred, and these height discrepancies will be almost disappeared when broad-band illuminators are used.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.12
• /
• pp.1742-1745
• /
• 2019

Hidden flame detection after allegedly extinguishing a fire cannot be emphasized enough. There are a few commercial hidden fire detection equipments which are imported, but the cost is relatively high. In this contribution, we propose a development of a low-cost, high-performance hidden flame detector using open-source hardware/software. We use Raspberry-pi based hardware board equipped with a TFT touch-screen LCD, a 3G modem, and an attachable battery device altogether integrated in a plastic case fabricated with a 3D printer. The proposed hidden flame detector shows the same performance of a commercial product FLIR E5 while consuming less than a half of the cost.

• The KIPS Transactions:PartD
• /
• v.18D no.3
• /
• pp.179-184
• /
• 2011

Current mobile devices have surpassed its boundaries as a more communication tool to a smart device which provides additional features. These features have supported the smart life of its users, but have reached its limit from low-performance processors and short-battery time. These issues can be resolved b implementing higher performing hardware, but they come with a burden of high cost. This paper introduces a new way of managing computing resources in a mobile device by enhancing the quality of human-computer interaction. The real-speed felt by users are mainly influenced by the time it takes form a user's input to the device to display the completed result on the screen. Since the size of the screen for mobile devices are small, if the processor only fetch data to be used for displaying on screen, the time can be significantly reduced. MVC+Prefetch Controller pattern accomplished this goal by using the minimum amount of data from DB to fetch display and still manages to support high-speed data transfer to achieve seamless display. This idea has been realized by practice using Samsung mobile phone S8500, which demonstrated the superior performance on user's perspective.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.4
• /
• pp.381-388
• /
• 2015

In this paper, a wireless video streaming system is designed and implemented for TV white space applications. It consists of a RF transceiver module, a digital modem, a camera, and a LCD screen. A VGA resolution video is captured by a camera, modulated by modem, and transmitted by RF transceiver module, and finally displayed at a destination 2.6-inch LCD screen. The RF transceiver is based on direct-conversion architecture. Image leakage is improved by low pass filtering LO, which successfully covers the TVWS. Also, DC offset problem is solved by current steering techniques which control common mode level at DAC output node. The output power of the transmitter and the minimum sensitivity of the receiver is +10 dBm and -82 dBm, respectively. The channel bandwidth is tunable among 6, 7 and 8 MHz according to regulations and standards. Digital modem is realized in Kintex-7 FPGA. Data rate is 9 Mbps based on QPSK and 512ch OFDM. A VGA video is successfully streamed through the air by using the developed TV white-space RF communication module.