• 한국전자파학회논문지
• /
• 제14권3호
• /
• pp.304-311
• /
• 2003

본 논문에서는 무선 LAN 엑세스 포인트용 2.4 ㎓, 5 ㎓ 이중공진 안테나를 제안한다. 두 가지의 서비스를 수용하기 위해서는 양쪽 주파수 대역 모두에서 동등한 이득특성을 보여야 한다. 두 개의 서로 다른 주파수 대역에서 동등한 이득 특성을 나타내기 위하여 선형배열(collinear array)을 적용하였다. 3차원 전산모의실험 프로그램인 CST MWS(Microwave Studio)를 사용한 선형배열 이중공진 안테나에 대 한 전산모의실험 결과 최대 이득은 2.4 ㎓에서 4.7 dBi, 5.7 ㎓에서 5.2 dBi를 나타내었다 2.4 ㎓에서 측정된 이득이 선형배열을 적용하여 2.1 ㏈ 증가되었다. 선형배열 이중공진 안테나의 측정결과 무선 LAN에 적용 가능한 성능을 나타내었다.

• Journal of electromagnetic engineering and science
• /
• 제16권3호
• /
• pp.182-190
• /
• 2016

The problem of resolution in antenna ground-penetrating radar (GPR) is very important for the investigation and detection of buried targets. We should solve this problem with software or a numeric method. The purposes of this paper are the modelling and simulation resolution of antenna radar GPR using three antennas, arrays (as in the software REFLEXW), the antenna dipole (as in GprMax2D), and a bow-tie antenna (as in the experimental results). The numeric code has been developed for study resolution antennas by scattered electric fields in mode B-scan. Three frequency antennas (500, 800, and 1,000 MHz) have been used in this work. The simulation results were compared with experimental results obtained by Rial and colleagues under the same conditions.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.872-876
• /
• 2006

This study was made to examine the electromagnetic interference(EMI) shielding effect (SE) of multilayered thin films in which indium-tin oxide(ITO) and Ag were deposited alternately from 3layer to 9 layer on Poly Methyl Meth Acrylate(PMMA) substrate at room temperature using a PF sputtering. We measured optical and electrical characteristics by UV-spectrometer and 4 point probe. The measurement of EMI SE in frequency range from 50MHz to 1.5GHz was performed by using ASTM D4935-89 method. We compared the measured EMI SEs with theoretical simulation data. We obtained relatively low resistivity and high transmittance from the EMI SE multilayers. In this study, we obtain good optical electrical characteristics with a minimun transmittance of about 60% at 550nm wavelength and sheet resistance of $2{\sim}3ohm/sq$., respectivity. Measured EMI SEs were over 50dB and similar to theoretical simulation data.

• Journal of electromagnetic engineering and science
• /
• 제16권4호
• /
• pp.254-258
• /
• 2016

In this paper, a brain phantom for evaluating brain stroke localization is proposed. To evaluate brain stroke localization, a phantom imitating three-dimensional (3D) simulation environment is needed. Mold for the proposed phantom was printed by a 3D printer and the interior of the phantom consists of 5 different brain tissue materials. Each of the brain tissue materials has the conductivity and permittivity similar to those of the International Commission on Non-Ionizing Radiation Protection (ICNIRP) standards for a frequency band from 0.5 to 2 GHz.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권4호
• /
• pp.471-477
• /
• 2014

In this paper, a modeling and co-simulation methodology is proposed to predict the radiated electromagnetic interference (EMI) from on-chip switching I/O buffers. The output waveforms of I/O buffers are simulated including the on-chip I/O buffer circuit and the RC extracted on-chip interconnect netlist, package, and printed circuit board (PCB). In order to accurately estimate the EMI, a full-wave 3D simulation is performed including the measurement environment. The simulation results are compared with near-field electromagnetic scan results and far-field measurements from an anechoic chamber, and the sources of emission peaks were analyzed. For accurate far-field EMI simulation, PCB power trace models considering IC switching current paths and external power cable models must be considered for accurate EMI prediction. With the proposed EMI simulation model and flow, the electromagnetic compatibility can be tested even before the IC is fabricated.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2003년도 학술대회논문집
• /
• pp.161-163
• /
• 2003

Ring-shaped electrodeless fluorescent lamp is removed the internal electrodes and heating filaments that are a light-limiting factor of conventional fluorescent lamps. The ring-shaped electrodeless lamp is intended as a high efficacy replacement for the incandescent reflector lamp in many applications. In this paper, maxwell 3D finite element analysis program (Ansoft) was used to obtain electromagnetic properties associated with the coil and nearby structures. The electromagnetic emitting properties were presented by 3D simulation software operated at 250[㎑]and some specific conditions. The optical measurement measured luminance and a temperature and an optical spectrum distribution for 10 minutes in a one minute interval at the same time.

• 대한기계학회논문집B
• /
• 제23권11호
• /
• pp.1453-1463
• /
• 1999

An electromagnetic flowmeter, based on a magnetic induction principle; provides an obstructionless flowmeter that essentially averages the velocity distribution over the pipe cross-sectional area. To predict the installation effects, the flowmeter installed near $90^{\circ}$ elbow is simulated by using a commercial code FLUENT(ver. 4.48) for the laminar flow field and a code developed through this study for magnetic field. The installation effects of the flowmeter are estimated by varying a number of the dependent parameters such as the radius of the elbow(Rc=1D, 1.5D, 2D, 3D), the location, Reynolds number and the direction of electrodes plane(${\varphi}$). It was found that all these factors affect the performance of the electromagnetic flowmeter significantly. The longer installation distance from the elbow is not always optimal to minimize the error, and also there exists an optimal location to install the EMF for a minimum error. Especially the flow signal with the electrodes plane direction of ${\varphi}=45^{\circ}$ is shown to yield smallest measurement error regardless of the Reynolds number and the curvature of elbow.

• 한국전자파학회논문지
• /
• 제8권4호
• /
• pp.373-381
• /
• 1997

디지틀 마이크로파 전송시스템은 다중경로 페이딩에 대한 대응책으로서 등화기를 필수적으로 장착하고 있다. 본 논문에서는 페이딩의 형태에 따라 기준탭의 위치를 가변시키는 기준탭 위치 가변방식 동기화를 제안하였다. 제안된 등화기는 기존의 등화기에 비해 우수한 성능을 나타내는데 MP 상황에서는 약 4~5 dB 정도의 성능개선을 얻을 수 있었으며 NMP 상황에서는 2~3 dB 정도의 성능 개선을 얻을 수 있음을 시뮬레이션 결과를 통하여 증명하였다.

• 한국전자파학회지:전자파기술
• /
• 제6권2호
• /
• pp.45-53
• /
• 1995

이동통신에서 QAM변조방식은 레일리 페이딩채널의 특성으로 인해 채널의 추정 및 보상의 방법을 사용하여 페이딩에 대한 왜곡을 보정하더라도 페이덩이 심하게 타는 부분에 대해서는 연집에러가 생기게 되어 그 성능은 열악하다. 본 논문에서는 이 연집에리를 bit reversal 블럭 인터리버플 이용하여 분산시키고 컴퓨터 탐색의 방법으로 찾아낸 레일리 채널에 적합한 TCM을 이용하여 레일리 페이딩 채널에서의 3/4 16QAM TCM의 성능 을 분석하였다. 분석결과 인터리버의 효과는 $10^{-3}$의 오율에서 약 2dB, 변형된 비터비 복호기의 사용으로는 2 5 5dB 그리고 다이버시티의 사용으로는 약9dB의 이득이 있음을 얄 수 있었다. 이는 16QAM TCM이 디지틀 이 동통신에서 사용될 수 있음을 보인다.

• 한국전자파학회논문지
• /
• 제13권10호
• /
• pp.1034-1039
• /
• 2002

본 논문에서는 개구결합 급전(포트 1)과 3차원 마이크로스트립 급전(포트 2)을 이용하여 단자간의 분리도가 우수한 이중편파 사각형 마이크로스트립 패치 안테나를 설계하였다. 설계는 각각의 급전방식에서 상용프로그램인 IE3D를 이용한 모의실험을 통하여 파라미터값들의 최적값을 찾고, 그 각각의 최적값을 통합하여 이중편파 마이크로스트립 안테나를 설계하고 제작하였다. 2 GHz 대역에서 실험한 결과 반사손실 10 dB 주파수 대역폭이 17 %이며, 30 dB 이상의 분리도를 확인하였다.