• Steel and Composite Structures
• /
• 제17권3호
• /
• pp.321-338
• /
• 2014

In the present study, a new simple first-order shear deformation theory is presented for laminated composite plates. Moreover, the number of unknowns of this theory is the least one comparing with the traditional first-order and the other higher-order shear deformation theories. Equations of motion and boundary conditions are derived from Hamilton's principle. Analytical solutions of simply supported antisymmetric cross-ply and angle-ply laminates are obtained and the results are compared with the exact three-dimensional (3D) solutions and those predicted by existing theories. It can be concluded that the proposed theory is accurate and simple in solving the static bending and free vibration behaviors of laminated composite plates.

• 소성∙가공
• /
• 제23권3호
• /
• pp.151-158
• /
• 2014

Half channel angular extrusion(HCAE) is the integration of equal channel angular extrusion(ECAE), which is a well-known severe plastic deformation(SPD) method, with conventional forward extrusion in order to increase the strain per pass and effectiveness of the grain refinement. In the current study, the effects of processing routes during HCAE(Routes A, B, and C) on the strain distribution of the specimens have been investigated for an AZ61 Mg alloy by using three-dimensional finite element analysis. Comparisons with the results from a multi-pass of ECAE are made.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.226-228
• /
• 2007

During asymmetrical cold rolling in AA 5052 sheet a reduction per a rolling pass was varied to investigate the effect of the ratio of the contact length between the roll and sample ($l_c$) to the sheet thickness (d) on the formation of shear textures. In order to intensify the shear deformation during asymmetrical rolling, AA 5052 sheet was asymmetrically cold rolled without lubrication by using different roll velocities of upper and lower rolls. Asymmetrical rolling with $l_c$/d=1.8 led to the formation of texture gradients throughout the sheet thickness in which the outer thickness layers depicted shear textures and the center thickness layers displayed a rolling texture. Asymmetrical rolling with $l_c$/d=3.1 gave rise to the formation of shear textures in the whole through-thickness layer. The strain states associated with asymmetrical rolling were investigated by the finite element method (FEM) simulation. FEM results indicated that the evolution of deformation texture in a thickness layer is strongly governed by integrated values of strain rates and along the streamline in the roll gap.

• 대한기계학회논문집A
• /
• 제33권5호
• /
• pp.489-495
• /
• 2009

A novel technique to measuret of viscoelastic properties of polymers is proposed to investigate complex Poisson's ratio as a function of frequency. The forced vibration responses for the samples under the normal and the shear deformation are to be measured with varying load masses. The measured data were used to obtain the viscoelastic properties of the material based on an accurate 2D numerical deformation model of the sample. The 2D model enabled us to exclude data correction by the empirical form factor used in 1D model. Comprehensive measurements of viscoelastic properties of two slightly varied silicone RTV rubber ($Silastic^{(R)}$ S2) compositions were performed. Standard composition (90% PDMS polymer + 10% catalyst) and modified composition (92.5% polymer + 7.5% catalyst) were tested in temperature range from $30^{\circ}C$ to $70^{\circ}C$. Shear modulus, modulus of elasticity, loss factor, and both the real and the imaginary parts of the Poisson's ratio were determined for frequencies from 50 to 400Hz in the linear deformation regime (at relative deformations $10^{-4}{\sim}10^{-3}$).

• 한국정밀공학회지
• /
• 제10권3호
• /
• pp.107-116
• /
• 1993

In the design and operation of robitic arm with flexible links, the equation of motion are required to exactly model the interaction between rigid body motion and elastic motion and to be formulated efficientlyl. In this paper, the flexible link is represented by applying the D-H rigid link representation method to measure the elestic deformation. And the equations of motion of robotic arm, which are configured by the generalized coordinates of elastic and rigid degrees of freedom, are formulated from the principle of virtual power. Dynamic characteristics due to elastic deformation of each link are obtained by using F. E. M to model complex shaped link acurately and by eliminating elastic modes of higher order that do not largely affect motion to reduce the number of elastic degrees of freedom. Also presented is the result of simulation of flexible robotic arms whose joints are controlled by direct or PD control.

• Geomechanics and Engineering
• /
• 제14권6호
• /
• pp.519-532
• /
• 2018

In this work, two dimensional (2D) and quasi three-dimensional (quasi-3D) HSDTs are proposed for bending and free vibration investigation of functionally graded (FG) plates using hyperbolic shape function. Unlike the existing HSDT, the proposed theories have a novel displacement field which include undetermined integral terms and contains fewer unknowns. The material properties of the plate is inhomogeneous and are considered to vary continuously in the thickness direction by three different distributions; power-law, exponential and Mori-Tanaka model, in terms of the volume fractions of the constituents. The governing equations which consider the effects of both transverse shear and thickness stretching are determined through the Hamilton's principle. The closed form solutions are deduced by employing Navier method and then fundamental frequencies are obtained by solving the results of eigenvalue problems. In-plane stress components have been determined by the constitutive equations of composite plates. The transverse stress components have been determined by integrating the 3D stress equilibrium equations in the thickness direction of the FG plate. The accuracy of the present formulation is demonstrated by comparisons with the different 2D, 3D and quasi-3D solutions available in the literature.

• Wind and Structures
• /
• 제27권4호
• /
• pp.269-282
• /
• 2018

In this paper, a new displacement field based on quasi-3D hybrid-type higher order shear deformation theory is developed to analyze the static and dynamic response of exponential (E), power-law (P) and sigmoïd (S) functionally graded beams. Novelty of this theory is that involve just three unknowns with including stretching effect, as opposed to four or even greater numbers in other shear and normal deformation theories. It also accounts for a parabolic distribution of the transverse shear stresses across the thickness, and satisfies the zero traction boundary conditions at beams surfaces without introducing a shear correction factor. The beam governing equations and boundary conditions are determined by employing the Hamilton's principle. Navier-type analytical solutions of bending and free vibration analysis are provided for simply supported beams subjected to uniform distribution loads. The effect of the sigmoid, exponent and power-law volume fraction, the thickness stretching and the material length scale parameter on the deflection, stresses and natural frequencies are discussed in tabular and graphical forms. The obtained results are compared with previously published results to verify the performance of this theory. It was clearly shown that this theory is not only accurate and efficient but almost comparable to other higher order shear deformation theories that contain more number of unknowns.

• 한국항공우주학회지
• /
• 제50권4호
• /
• pp.223-231
• /
• 2022

금속 적층제조 공정 중 발생할 수 있는 잔류응력은 3D 프린팅을 통한 정밀한 금속 부품 제작을 위해 적절히 통제되어야 하는 중요한 요소이다. 따라서 본 연구에서는 이러한 잔류응력에 영향을 끼치는 요인에 대하여 실험적인 방법을 이용하여 고찰하였다. 실험을 위해 적층제조 공정을 통해 시편을 제작하고 이를 절단하여 변형량 측정을 수행하였으며, 측정된 데이터를 curve fitting 등의 방법을 이용하여 적절히 보정함으로써 공정 파라미터 및 금속 분말 재사용 여부가 금속 적층제조 공정에서 발생한 잔류응력으로 인한 변형에 끼치는 영향을 정량적으로 분석할 수 있는 자료를 확보하였다. 이 결과로부터 금속 적층제조 공정에서 잔류응력으로 인한 변형의 크기에 가장 큰 영향을 끼치는 요소는 금속 분말 재사용 여부임을 확인하였다. 또한 레이저의 패턴, 적층 회전 각도와 같은 공정 파라미터도 변형 크기에 영향을 줄 수 있는 것을 확인하였다.

• 한국HCI학회논문지
• /
• 제2권2호
• /
• pp.19-26
• /
• 2007

이 논문에서는 증강현실을 이용하여 디포머블(Deformable)한 3차원의 도자기 모델을 손을 이용하여 자연스러우면서도 직관적으로 변형시키고, 이를 실제 물체들과 같이 디스플레이 해 줌으로써 실재감을 느낄 수 있는 새로운 시스템을 제안한다. 제안된 시스템에서는 값비싸면서도 거추장스러운 장비를 사용하지 않고도 카메라와 마커의 상대적인 위치를 통해서 손의 위치를 알아내게 되고, 일반적으로 물체를 변형시킬 때 사용하는 손의 움직임을 본떠 6가지 형태의 모델링 인터페이스 및 버튼형 인터페이스를 제공한다. 그리고 실시간으로 변형된 모델에 대한 결과를 증강현실을 이용하여 디스플레이 해 주는 방법을 통해서 물체의 크기 및 모양을 좀 더 실재감 있게 느낄 수 있게 한다. 이러한 방법은 비단 도자기뿐만 아니라 다양한 분야에 활용 가능하며, 보통 컴퓨터가 있는 집에 화상카메라가 하나 정도는 있다는 점에서 교육적인 용도로써의 활용 가능성이 상당히 크다 할 수 있을 것이다.

• Journal of Welding and Joining
• /
• 제19권3호
• /
• pp.278-284
• /
• 2001

Both creep deformation and creep crack growth experiments have been conducted on 2.25Cr-1Mo steel weldment in order to provided an information on residual life prediction of structural component weldment containing a crack. The stress exponent of creep deformation equation for the base metal and weldment at 823k were found to be 10.2 and 7.3, respectively. These two values could be assumed that dislocation climb processes are controlling the creep deformation of both materials. The creep rate of the weldment was very low, compared with that of base metal under the same applied stress. Whereas the creep crack growth rate of the weldment was almost twice higher than that of base metal under the fixed value of $C^*$. This may indicate that the weldment is stronger than the base metal in view of creep deformation and is brittle during creep crack growth due to the intrinsic microstructure of banite and relatively higher and Mn contents.