• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2003년도 추계학술발표회 논문집
• /
• pp.135-140
• /
• 2003

This study try to surface deformation analyzing and 3-D monitoring of hydro structure by close-range photogrammetry technique using 35mm metric camera. For this, the lens distortion parameters were acquired for 21mm super-wide-angle lens which is mounted in 35mm metric camera. After that, the system designed for absolute deformation analysis of object surface, and examined the application validity Also, optimum photographing condition was derived by calculated the standard deviation of this system. This system can monitor periodically changing of surface area, volume and deformation precisely after placed plate underwater. Finally, this paper suggested efficiency of absolute deformation analysis by using small format camera.

• 한국측량학회지
• /
• 제22권2호
• /
• pp.179-186
• /
• 2004

본 연구는 산업 사진측량을 이용하여 자동차의 외형을 정밀 측정하고, 사고 등의 원인으로 변형이 발생하였을 때 변형량을 측정하는 방법에 관한 것이다. 자동차의 외형을 정밀 측정하기 위하여 점군데이터를 취득할 수 있는 프로젝션 타겟을 사용함으로써 보다 곡면에 대한 정밀한 측정이 가능하도록 하였으며, 대상물 촬영 및 좌표해석을 통하여 타겟의 3차원 좌표를 취득하였다. 취득된 점군데이터는 불규칙 삼각망으로 표면을 형성하여 3차원 모델링을 하였다. 또한, 변형 발생부위를 정밀 측정함으로써 교통사고 분석 등에 효율적이고 정밀한 데이터를 제공할 수 있을 것이다.

• 대한조선학회논문집
• /
• 제45권4호
• /
• pp.379-388
• /
• 2008

A hybrid Cartesian/immersed boundary code is expanded to simulate flow field around a three-dimensional body which undergoes large dynamic deformation. Immersed boundary nodes are automatically distributed based on the edges crossing triangles on body boundary. Velocity vectors are reconstructed at those immersed boundary nodes along local normal lines to the boundary. The reconstruction of pressure is avoided using the hybrid staggered/non-staggered grid method. The developed code is validated through comparisons with other results on laminar flow over a sphere. The code is applied to simulate flow around a foil which is attached to a body of revolution and rotates under periodic deformation. The periodic variation of the tip vortex is observed and the effects of the deformation on hydrodynamic force acting on the body are investigated.

• 터널과지하공간
• /
• 제30권1호
• /
• pp.15-28
• /
• 2020

본 연구는 개별요소법을 이용하여 삼차원 불연속절리망 시스템의 강도 및 변형계수를 추정하기 위해 제안된 기법을 소개하였다. DFN(discrete fracture network) 시스템에서 개별 절리는 유한 길이의 정사각 평면으로 취급하였다. 해석영역은 무결암과 유사한 거동을 하도록 설정된 가상절리와 실제 개별 절리의 조합으로 형성된 다면체로 이산화하였다. 제안된 기법의 적용성을 검토하기 위하여 확정적 및 추계론적 삼차원 DFN 시스템으로 이루어진 한 변이 10m인 정육면체 해석영역에 대하여 개별요소법에 의한 강도 및 변형계수를 추정하는 수치실험이 수행되었다. 또한, 본 연구는 절리의 기하학적 속성이 DFN 시스템의 강도 및 변형 특성에 미치는 영향을 살펴보았다. 제안된 기법은 삼차원 DFN 시스템의 이방적 강도 및 변형 특성을 효과적으로 추정하는 것으로 평가되었다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2001년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 2001
• /
• pp.98-106
• /
• 2001

The deformation characteristics of cohesionless soils in Korea were investigated using resonant column tests. Total 60 samples, which were sampled from sedimentary and residual soils and reconstituted using controlled particle-size distributions, were prepared. The confining pressure applied in the tests ranges from 20 kPa to 500 kPa. The test results ware categorized into 3 groups including clean sands, silt and silty sand, and residual soils. Based on test results, the small-strain shear modulus(G$_{max}$) and damping ratio(D$_{min}$) were determined and the effects of confinement on G$_{max}$ and D$_{max}$ were characterized. The empirical correlations predicting G$_{max}$ were suggested for 3 group soils. Nonlinear deformational characteristics of clean sands are significantly affected by confining pressure and the ranges and mean curves for G and D are suggested considering the range of confining Pressure. The silt and silty sand and residual soils were weakly affected by confining pressure, so the representative ranges and curves, independent of confining pressure, were proposed.d.posed.d.

• 방송공학회논문지
• /
• 제27권2호
• /
• pp.207-215
• /
• 2022

최신 볼류메트릭 기술이 제공하는 높은 기하학적 정확도와 사실성은 실제 객체와 캡춰된 3D 모델 간 높은 일치도를 보장한다. 그럼에도 불구하고 이렇게 획득된 3D 모델은 프레임 간 완전히 독립적인 3D모델로 시퀀스를 구성하고 있다는 측면에서, 매 프레임 모델 표면 구조(Geometry)의 일관성이 보장 되지 않으며, 정점(Vertex)의 밀도가 매우 높고 정점 간 연결 노드(Edge)가 매우 복잡해지는 특징을 확인 할 수 있다. 이 기술을 통해 생성된 3D 모델은 영화나 비디오 게임 제작 파이프라인에서 제작된 모델과는 본질적으로 다르며, 실시간 렌더링, 애니메이션 및 시뮬레이션, 압축과 같은 응용 분야에서 직접 사용하기에 적합하지 않다. 이와는 대조적으로 우리의 방법은 프레임 간 3D 모델 표면 구조의 높은 일관성을 확보하는 리메싱(Remeshing)과 비강체 표면(Non-rigid Shape)의 대응(Correspondences) 및 매칭(Matching)을 통한 점진적 변형(Deformation) 과정 및 텍스쳐 전달(Texture Transfer) 과정을 연결함으로서 볼류메트릭 3D 모델 시퀀스 품질의 일관성을 유지하며, 후 처리 과정의 자동화를 제공한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.753-756
• /
• 2005

Rapid prototyping (RP) technologies are mainly performed by layered manufacturing (LM) process which manufactures 3D physical objects by depositing 2D sections in a direction. Thus, deformations are apt to occur in overhanging area of the RP processed part. Also, excessive adhesion between part and platform of the RP apparatus is generated. In order to prevent these problems, most of the RP technologies adopt support structure. Main element to support a part in the support structure is strand. In actual field, however, the number of strand is determined by the software operating reference guide or RP system operator's experience. In this paper, a methodology to determine the optimal strand spacing is presented through experiments and measurements for the SL part deformation by change of strand spacing and part weight in the support structure of the stereolithography.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.147-152
• /
• 2000

This paper presents the thermoelastic analysis and 3-D failure analysis of the carbon/carbon brake disk. The mechanical properties of the carbon/carbon brake disk were measured for both in-plane and out of plane directions. The mechanical properties were used as the input of the thermoelastic analysis and 3-D stress analysis for the brake disk. The gap between rotor clip and clip retainer was an important parameter in the loading transfer mechanism of the rotor. The change of gap was considered separating the mechanical deformation and thermal deformation. Because the rotor clip and clip retainers were not contacted, the clip retainers and rivets were excluded from the rotor analysis model. The disk was modeled by using the cyclic symmetry condition and the contact problem between the rotor disk and rotor clip was considered. From the results of the 3-D stress analysis, the stress concentration at the key hole of the brake disk was confirmed.

• 한국농공학회논문집
• /
• 제61권3호
• /
• pp.43-53
• /
• 2019

It is well-known fact that the stone-mastic asphalt (SMA) mixture has shown superior rut resistance, compared with the dense-graded asphalt (DGA) mixture in highway pavements. However, the SMA is measured to be inferior to DGA mixes when tested by well-known high-temperature test methods, such as the wheel tracking (WT), asphalt pavement analyzer, the Marshall Stability and Kim Test. Therefore, this study examined the reasons why it was measured to be inferior, and devised a potential procedure by which the superiority of SMA could be measured at $60^{\circ}C$. The strength against deformation ($S_D$), which was known to show very high correlation with WT results for DGA mixes, was measured by the Kim Test on the specimen confined in the compacted mold. In standard Kim Test, which used the specimen without confinement, the DGA was measured to show higher $S_D$ than the SMA. But by confining specimen, it was found that the $S_D$ of SMA was measured to be higher than that of DGA. Therefore, the confined static test protocol devised in this study was found to be feasible for evaluating rut resistance of SMA mix.

• 한국CDE학회논문집
• /
• 제15권2호
• /
• pp.136-143
• /
• 2010

Realistic Modeling is to maximize the reality of the environment in which perception is made by virtual environment or remote control using two or more senses of human. Especially, the field of haptic rendering, which provides reality through interaction of visual and tactual sense in realistic model, has brought attention. Haptic rendering calculates the force caused by model deformation during interaction with a virtual model and returns it to the user. Deformable model in the haptic rendering has more complexity than a rigid body because the deformation is calculated inside as well as the outside the model. For this model, Gibson suggested the 3D ChainMail algorithm using volumetric data. However, in case of the deformable model with non-homogeneous materials, there were some discordances between visual and tactual sense information when calculating the force-feedback in real time. Therefore, we propose an algorithm for the Volume Haptic Rendering of non-homogeneous deformable object that reflects the force-feedback consistently in real time, depending on visual information (the amount of deformation), without any post-processing.