• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.551-556
• /
• 2009

3-D CAD (Computer Aided Design) system is an indispensable tool for manufacturing. A lot of engineers have studied for the methods to generate a curved surface on an N-sided shape, which is the basic technology of 3-D CAD systems. This surface generation, however, has three problems on the case of long and narrow shapes: the resultant surface is distorted, the surface is not continuous to adjacent surfaces, or additional user inputs are required to generate the surface. Conventional methods have not yet solved these problems at the same time. In this paper, we propose the method to generate internal curves that divide a long and narrow shape into regular N-sided sections so as to divide the shape into an N-sided section and four-sided ones. Our method controls the shape of internal curves by dividing an N-sided long and narrow shape into an N-sided section and four-sided ones, and solves distortion of the generated curved surface. In addition, each of the generated sections is interpolated with G1-continuous surfaces. This process does not require any user's further input. Therefore, the three problems mentioned above will be solved at the same time.

• 한국컴퓨터정보학회논문지
• /
• 제6권2호
• /
• pp.14-19
• /
• 2001

본 논문은 2차 다항식을 이용하여 3차원 물체의 표면 특징을 추출하고 표현하는 방법을 제안한다. 우리는 수정된 스캔 라인 기법을 이용하여 에지 맵을 얻는다. 에지 맵으로부터 3차원 물체의 각 면들을 분리하기 위해 레이블링 연산을 하고 각 면에서 중심점과 모서리 점들을 추출한다. 그 다음에, 평면 방정식으로부터 각 면이 평면인지 곡면인지를 판단하고, 3차원 물체를 표현하기 위해 각 면의 평면 또는 곡면의 계수 및 특징들을 추출한다. 그리고 합성영상과 실측영상을 통해서 제안된 기법의 성능을 알아보았다.

• 한국생산제조학회지
• /
• 제7권3호
• /
• pp.99-103
• /
• 1998

The curved surface machined by plate end mill causes a excess non-cutting volume, in these cases ball end mill is used for the curved surfaces. This study is aimed to obtain the optimum cutting conditions of various cutting speed, table speed, tool diameter, radius of curvature roughness on the conditions of various cutting speed, tool diameter, radius of curvature when machining the curved surface using the ball end mill. After designing curve rates, obtaining NC data by CAD/CAM system through CC-Cartesian method and transferred the data through DNC system, we machined the specimens by the CNC machining center, The surface roughness of specimens was measured by surface roughness tester and CNC 3D coordinate measuring machine. The cutting condition were the same as follow velocity; 15, 20, 25 30m/min, feed rate;40, 60, 80, 100m/min and radius of curvature; 30,40,50,60mm, tool diameters; ø8, ø12, ø16, ø 20mm. Analizing the working results, we can acquire the optimum cutting condition of curved specimen at the cutting velocity of 20~25m/min and the feed rate of 80mm/min. As the same cutting condition the best surface roughness was showed at ø16mm of the tool diameter. But the tool diameter was smaller than ø8mm. we could improve for the surface roughness by controlling the cusp.

• 제어로봇시스템학회논문지
• /
• 제19권11호
• /
• pp.968-973
• /
• 2013

In the transportation industry, especially in the shipbuilding process, 3D surface measurement of large-scale hull pieces is needed for fabrication and assembly. We suggest an efficient method for checking the shape of curved plates under the forming operation with short time by measuring 3D profiles along the multi lines of the target surface. For accurate profile reconstruction, 2D camera calibration and 3D calibration using gauge blocks were performed. The evaluation test shows that the measurement accuracy is within the boundary of tolerance required in the shipbuilding process.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 춘계학술대회 논문집
• /
• pp.58-61
• /
• 2002

A new concept of dieless sheet forming technology is proposed in this study to overcome the drawback of conventional dieless forming technology. For this purpose, dual points contact of the conventional punch system, which is a primary cause of surface defects, is replaced to single point contact using technology combined with fluid forming. It is expected that the advanced system may lead to easy displacement control of multi-punch elements, reducing surface defects, and increasing decision and forming limits. The reduced number of punch elements also saves the cost of the equipment. In addition, the new technology can be utilized for deep drawing as well as two- or three-dimensional curved surface forming, and thereby become multi-functional and multi-purpose differently from the conventional technology.

• 한국의류학회지
• /
• 제29권9_10호
• /
• pp.1359-1368
• /
• 2005

When we develop the tight-fit 2D pattern from the 3D scan data, segmentation of the 3D scan data into several parts is necessary to make a curved surface into a flat plane. In this study, Garland's method of triangle simplification was adopted to reduce the number of data point without distorting the original shape. The Runge-Kutta method was applied to make triangular patch from the 3D surface in a 2D plane. We also explored the detailed arrangement method of small 2D patches to make a tight-fit pattern for a male body. As results, minimum triangle numbers in the simplification process and efficient arrangement methods of many pieces were suggested for the optimal 2D pattern development. Among four arrangement methods, a block method is faster and easier when dealing with the triangle patches of male's upper body. Anchoring neighboring vertices of blocks to make 2D pattern was observed to be a reasonable arrangement method to get even distribution of stress in a 2D plane.

• 한국통신학회논문지
• /
• 제19권10호
• /
• pp.1910-1924
• /
• 1994

평면으로 이루어진 물체에 비하여 3차원 곡면물체는 물체의 표현에 많은 양의 데이터를 요구하면 일반적으로 물체의 특성을 명확하게 정의하기가 어려워 인식이 어렵다. 본 논문은 3차원화상을 이용하여 인식하고자 하는 물체에 대한 실용적인 표현법을 개발하고 물체를 보는 방향에 무관하게 인식할 수 있는 알고리즘을 고안하여 여러 가지의 다른 곡면물체를 자동으로 인식할 수 있는 방법을 제시한다. 본 논문에서는 수행하고자 하는 작업을 고려하여 설정된 몇 개의 가상점과 물체 표면점들의 상대적인 기하학적 성질을 이용하여 물체를 인식한다. 몇 개의 가상점으로 표현된 물체를 일반화된 Hough변환으로 인식하는 본 알고리즘은 적절한 가상점의 설정으로 다음에 계속되는 작업을 줄일 수가 있으며 일반적인 3차원곡면물체를 비교적 노이즈에 큰 영향없이 인식하게 한다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.152-155
• /
• 2005

A method of three-dimensional curved surface generation was studied for multi-point dieless forming (MPDF) in the shipbuilding industry. Three-dimensional coordinates of punch elements were obtained from objective surfaces using a proprietary CAD program. MPDF surfaces were generated by adjusting the height of punch elements in accordance with the coordinates. Some problems, such as collision of punch elements and contact between plates and punch bodies, were anticipated from the analysis of the results. A twisted surface was formed successfully by MPDF in a laboratory scale, which suggests possibility of application of the technology to the shipbuilding industry.

• 한국건축시공학회지
• /
• 제12권3호
• /
• pp.347-357
• /
• 2012

While it is generally possible to install curved panels manufactured in a factory within the permitted error range on an irregular surface frame of concrete or steel, it is difficult and expensive. Freeform architecture is thus designed and constructed differently from formal buildings. In order to more easily and inexpensively actualize freeform architecture, Building Information Modeling (hereinafter referred to as BIM) has recently been applied in the construction industry. However, the related research and case analyses are not sufficient to identify the implications and contributions of freeform buildings in future similar projects. Therefore, this research will study design and construction methods for freeform surfaces, particular the concrete surface frame of freeform buildings based on BIM, focused on the Tri-Bowl project. This study attempts to analyze the pros and cons of each method for the concrete surface frame of the Tri-Bowl, and then presents the lessons learned and implications related to the design and construction process of the freeform architecture. Several implications for design and construction of concrete surface frame of the freeform building, the Tri-Bowl, are found. The first is that manufacturing and installation of a curved concrete frame is precisely performed based on the exact numerical values of materials and installation made using BIM 3D technologies, such as CATIA and Rhino. The second is that close and continuous collaboration among the different participants in the construction of the Tri-Bowl allowed them to cope with virtual conditions. The third is that design and construction processes have changed, and high quality of the surface frame of a freeform building is required.

• 대한의용생체공학회:의공학회지
• /
• 제23권5호
• /
• pp.351-364
• /
• 2002

일차원 어레이 변환자를 기계적으로 움직여 3차원 영상을 얻는 기존의 3차원 초음파 영상 기법은 일차원 배열 변환기가 갖는 고도방향 해상도의 저하를 극복하기 어렵다. 한편 이차원 위상 어레이 변환자를 이용하는 실시간 3차원 영상 시스템은 많은 수의 채널 수를 가지기 때문에 고비용의 매우 큰 빔집속부를 필요로 한다. 이러한 문제점을 극복하기 위해 본 논문에서는 2차원 곡면 어레이 상에서 256 채널의 송수신 부구경을 전기적으로 움직이면서 관심영역의 입체영상을 얻을 수 있는 3차원 영상화 기법을 제안하였다. 이를 위해 본 논문에서는 상용 3차원 영상 장치에 사용되는 기계 주사식 일차원 곡면 어레이 변환자와 측방향과 고도방향으로 동일한 시야각을 갖는 이차원 곡면 어레이 변환자를 설계하였다. 또한 제안된 방법에서는 256 개의 제한된 채널 수를 이용하면서도 송수신 부구경의 크기를 증가시켜 보다 향상된 해상도의 영상을 구현하기 위해 직사각형 모양의 부구경에서 네 모서리 부분의 어레이 소자들을 적절히 제거한 형태의 부구경을 사용하였다. 특히 수신시는 고도방향이나 측방향으로한 배열 소자씩 건너뛰는 희박 어레이 기법을 적용하여 수신 부구경의 크기를 증가시켰다. 또한 수신시 희박 어레이로 인한 소자간의 간격 증가로 인해 유발되는 그레이팅 로브 상승을 억제하기 위해 송신시에는 희박 어레이를 적용하지 않고 폴드-오버 어레이 기법을 적용함으로써 송신부구경의 크기를 측방향과 고도방향으로 각각 두배만큼 증가시키는 효과를 얻었다. 제안한 방법을 통해 기존의 기계 주사식 일차원 어레이 변환자를 이용한 실시간 3차원 시스템과 비교하여 측방향으로는 거의 같고 고도방향으로는 훨씬 우수한 해상도의 영상을 획득할 수 있음을 컴퓨터 모사실험을 통해 검증하였다.